Problem with si card
Lemle Géza
lemle at integrity.hu
Wed Jul 13 08:13:47 GMT 2005
Hello,
I have a Specialix (now Perle) SI isa bus card. I use this with modems in a
RAS server. Everything was fine until I upgraded the os from 5.3 to
-current.
Currently I could use only 1 port (4.) on the card. I can't open another
port with kermit, or getty, too.
This machine is an Intel SE440BX-2 motherboard, PII 400 Celeron processor,
256 MB RAM The SI card memory address space is reserved for isa devices in
the BIOS.
Configuration:
/boot/device.hints
hint.si.0.at="isa"
hint.si.0.maddr="0xd0000"
hint.si.0.irq="12"
/etc/gettytab
default:\
:pp=/etc/ppp/ppplogin:\
:cb:ce:ck:lc:fd#1000:im=\r\n%s/%m (%h) (%t)\r\n\r\n:sp#1200:\
:if=/etc/issue:
m|Metallo:\
:np:hw:sp#57600:
/etc/ttys
ttyA01 "/usr/libexec/getty m" dialup on insecure
ttyA02 "/usr/libexec/getty m" dialup on insecure
ttyA03 "/usr/libexec/getty m" dialup on insecure
ttyA04 "/usr/libexec/getty m" dialup on insecure
uname
6.0-CURRENT FreeBSD 6.0-CURRENT #0: Thu Jul 7 16:58:15 CEST 2005
dmesg
si0 at iomem 0xd0000-0xd7fff irq 12 on isa0
si0: [GIANT-LOCKED]
si0: card: SIHOST2, ports: 8, modules: 1, type: 1 (SI)
Best regards,
Geza
More information about the freebsd-current
mailing list