Fatal trap 9: Acer aspire 1513lmi

jacula jacula at gmail.com
Sat Feb 12 12:13:25 GMT 2005 

Hi at all.

I tried to install the 6-current on this laptop and used the iso image:

ftp://ftp.freebsd.org/pub/FreeBSD/snapshots/amd64/6-CURRENT-20050209/6-CURRENT-20050209-amd64-miniinst.iso

On this laptop I installed the 5-stable amd64 and 5-stable i386 and all
is ok.
But when I boot with this iso, I've this error message after that the
system recognize the umass device:

.
.
Opened disk dao -> 6


Fatal trap 9: general protection fault while in kernel mode

cpuid = 0; apic id = 0
instruction pointer  = 0x8:0xffffffff80320b5f
stack pointer        = 0x10:0xffffffffa54df610
frame pointer        = 0x10:0xffffffffa54df670
code segment         = base 0x0, limit 0xf, type 0x1b
                      = DPLO, pres1, long 1, def320,gran 1
processor eflags     = interrupt enable, resume, IOPL = 0
current process      = 1 (swapper)
[ thread pid 1 tid 100002 ]
stopped at       devfs_populate+0x1df: incl %ebp
db>

Could someone help me, please?
I attached my dmesg

Thank you

Bye Jacula
-------------- next part --------------
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.3-STABLE #0: Thu Feb 10 15:27:19 CET 2005
    root at kernel.hell:/usr/obj/usr/src/sys/LUCIFER
ACPI APIC Table: <NVIDIA NV_APIC_>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon 64 Processor 3400+ (2194.35-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0xf4a  Stepping = 10
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow>
real memory  = 1073152000 (1023 MB)
avail memory = 1026195456 (978 MB)
    ACPI-0377: *** Info: Table [SSDT] replaced by host OS
ACPI: overriding DSDT/SSDT with custom table
    ACPI-0377: *** Info: Table [DSDT] replaced by host OS
ioapic0: Changing APIC ID to 2
ioapic0 <Version 1.1> irqs 0-23 on motherboard
acpi0: <PTLTD   RSDT> on motherboard
acpi0: Power Button (fixed)
acpi_ec0: <Embedded Controller: GPE 0x25> port 0x66,0x62 on acpi0
acpi_ec0: can't allocate data port
device_attach: acpi_ec0 attach returned 6
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x25> port 0x66,0x62 on acpi0
cpu0: <ACPI CPU (2 Cx states)> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <nVidia nForce3 USB Controller> mem 0xd0000000-0xd0000fff irq 20 at device 2.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <nVidia nForce3 USB Controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
umass0: Generic USB Mass Storage Device, rev 1.10/1.92, addr 2
ohci1: <nVidia nForce3 USB Controller> mem 0xd0001000-0xd0001fff irq 20 at device 2.1 on pci0
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <nVidia nForce3 USB Controller> on ohci1
usb1: USB revision 1.0
uhub1: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xd0004000-0xd00040ff irq 21 at device 2.2 on pci0
ehci_pci_attach: companion usb0
ehci_pci_attach: companion usb1
usb2: EHCI version 1.0
usb2: companion controllers, 4 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: single transaction translator
uhub2: 6 ports with 6 removable, self powered
pcm0: <nVidia nForce3> port 0x1c00-0x1c7f,0x1400-0x14ff mem 0xd0002000-0xd0002fff irq 22 at device 6.0 on pci0
pcm0: <Unknown AC97 Codec (id = 0x414c4752)>
pci0: <simple comms> at device 6.1 (no driver attached)
atapci0: <nVidia nForce3 UDMA133 controller> port 0x2080-0x208f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 8.0 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pcib1: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pci2: <ACPI PCI bus> on pcib1
bge0: <Broadcom BCM5788 Gigabit Ethernet, ASIC rev. 0x3003> mem 0xd0100000-0xd010ffff irq 19 at device 6.0 on pci2
miibus0: <MII bus> on bge0
brgphy0: <BCM5705 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge0: Ethernet address: 00:c0:9f:41:54:aa
cbb0: <TI4510 PCI-CardBus Bridge> mem 0xd0116000-0xd0116fff irq 18 at device 7.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
fwohci0: <1394 Open Host Controller Interface> mem 0xd0110000-0xd0113fff,0xd0117000-0xd01177ff irq 17 at device 7.1 on pci2
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:c0:9f:00:00:1a:d0:53
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:c0:9f:1a:d0:53
fwe0: Ethernet address: 02:c0:9f:1a:d0:53
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci2: <network> at device 8.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci1: <ACPI PCI bus> on pcib2
acpi_video0: <ACPI video extension> mem 0xe0000000-0xefffffff,0xd1000000-0xd1ffffff irq 19 at device 0.0 on pci1
acpi_button0: <Power Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
sio0: configured irq 3 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 port 0x2f8-0x2ff irq 3 drq 1 flags 0x10 on acpi0
sio0: type 16550A
ppc0: <ECP parallel printer port> port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <ISA Option ROMs> at iomem 0xdc000-0xdffff,0xc0000-0xcffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2194350073 Hz quality 800
Timecounters tick every 1.000 msec
cpu0: Px state: P0, 2200MHz, 81500mW, 100us, 9us
cpu0: Px state: P1, 2000MHz, 64000mW, 100us, 9us
cpu0: Px state: P2, 1800MHz, 47000mW, 100us, 9us
cpu0: Px state: P3, 800MHz, 19000mW, 100us, 9us
cpu0: Px method: AMD K8 Cool'n'Quiet
ad0: 57231MB <TOSHIBA MK6025GAS/KA200A> [116280/16/63] at ata0-master UDMA100
umass0: at uhub0 port 3 (addr 2) disconnected
umass0: detached
umass0: Generic USB Mass Storage Device, rev 1.10/1.92, addr 2
ata1-slave: FAILURE - ATAPI_IDENTIFY timed out
ata1-slave: FAILURE - ATAPI_IDENTIFY timed out
ata1-slave: FAILURE - ATAPI_IDENTIFY timed out
acd0: DVDR <QSI DVDRW SDW-042/DX70> at ata1-master UDMA33
cd0 at ata1 bus 0 target 0 lun 0
cd0: <QSI DVDRW SDW-042 DX70> Removable CD-ROM SCSI-0 device 
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Generic Flash R/W 2002> Removable Direct Access SCSI-2 device 
da0: 1.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): Unretryable error
Opened disk da0 -> 6
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): Unretryable error
Opened disk da0 -> 6
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): Unretryable error
Opened disk da0 -> 6
Mounting root from ufs:/dev/ad0s2a
Pre-seeding PRNG:
 kickstart
.
Loading configuration files.
Entropy harvesting:
 interrupts
 ethernet
 point_to_point
 kickstart
.
swapon: adding /dev/ad0s2b as swap device
Starting file system checks:
/dev/ad0s2a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s2a: clean, 981745 free (673 frags, 122634 blocks, 0.1% fragmentation)
/dev/ad0s2e: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s2e: clean, 253810 free (26 frags, 31723 blocks, 0.0% fragmentation)
/dev/ad0s2f: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s2f: clean, 1494841 free (58953 frags, 179486 blocks, 1.3% fragmentation)
/dev/ad0s2d: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s2d: clean, 308880 free (1336 frags, 38443 blocks, 0.3% fragmentation)
hw.snd.pcm0.vchans: 
0
 -> 
4

hw.snd.maxautovchans: 
0
 -> 
4

Setting hostname: kernel.hell.
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
	options=1a<TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
	inet 192.168.0.1 netmask 0xffffff00 broadcast 192.168.0.255
	inet6 fe80::2c0:9fff:fe41:54aa%bge0 prefixlen 64 tentative scopeid 0x1 
	ether 00:c0:9f:41:54:aa
	media: Ethernet autoselect (none)
	status: no carrier
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
	inet 127.0.0.1 netmask 0xff000000 
	inet6 ::1 prefixlen 128 
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 
Additional routing options:
.
Starting devd.
hw.acpi.cpu.cx_lowest: 
C1
 -> 
C2

Mounting NFS file systems:
.
Starting syslogd.
Feb 12 12:50:02 kernel syslogd: kernel boot file is /boot/kernel/kernel
Turning on accounting.
Accounting enabled
Feb 12 12:50:03 kernel kernel: Accounting enabled
Clearing /tmp.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib
Starting usbd.
Starting local daemons:
.
Updating motd
.
Starting ntpd.
Feb 12 12:50:03 kernel ntpd[396]: bind() fd 7, family 28, port 123, addr fe80:1::2c0:9fff:fe41:54aa, in6_is_addr_multicast=0 flags=0 fails: Can't assign requested address
Configuring syscons:
 keymap
 keyrate
 font8x16
 font8x14
 font8x8
 blanktime
 screensaver
.
Initial amd64 initialization:
.
Additional ABI support:
.
Starting cron.
Local package initialization:
.
Additional TCP options:
.
Starting moused:
.
Starting background file system checks in 60 seconds.

Sat Feb 12 12:50:05 CET 2005
Feb 12 12:50:46 kernel su: lucifer to root on /dev/ttyp0

More information about the freebsd-current mailing list