[PATCH] /etc/defaults/rc.conf -- Static Routing Explanation
Ryan Sommers
ryans at gamersimpact.com
Fri Feb 4 06:48:59 PST 2005
Maxim Konovalov wrote:
>
> There is a good example in rc.conf(5) already.
>
We have examples in both rc.conf(5) (as shown below) and
defaults/rc.conf then. To keep a form of congruence why not put all the
examples in one place, either the manpage or the file?
As someone that's used FreeBSD since 4.0-RELEASE I had to do a less
/etc/rc.d/routing to figure out how to use the tunables. It was my fault
that I didn't do a man rc.conf, however, never in my using FreeBSD and
rc.conf have I needed to look at this manpage. Nor have I ever seen
there was one. Might I also suggest a reference in defaults/rc.conf to
the manpage?
Bernd Walter wrote:
>
> And comment lines are not defaults.
>
Then I guess the following lines need to all be removed:
#cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config.
#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample
alias entry.
#ifconfig_ed0_ipx="ipx 0x00010010" # Sample IPX address family entry.
#sppp_interfaces="isp0" # example: sppp over ISDN
#spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top
secret' hisauthname=some-gw hisauthsecret='another secret'"
#gif_interfaces="gif0 gif1" # Examples typically for a router.
#gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router.
#gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router.
#syslogd_flags="-ss" # Syslogd flags to not bind an inet socket
#atm_netif_hea0="atm 1" # Network interfaces for physical interface.
#atm_sigmgr_hea0="uni31" # Signalling manager for physical interface.
#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or
ILMI).
#atm_macaddr_hea0="NO" # Override physical MAC address (or NO).
#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00"
# ATMARP server address (or local).
#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface
(or NO).
#ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068)
#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64
#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1"
#ipv6_router_flags="-l" # Example for route6d with only IPv6
site local
#ipv6_router_flags="-q" # If you want to run a routing daemon on
an end
#ipv6_network_interfaces="ed0 ep0" # Examples for router
#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples
for rtr.
#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples
for rtr.
#ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry
#ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry.
#jail_example_rootdir="/usr/jail/default" # Jail's root directory
#jail_example_hostname="default.domain.com" # Jail's hostname
#jail_example_ip="192.168.0.10" # Jail's IP number
#jail_example_exec="/bin/sh /etc/rc" # command to execute in jail
#jail_example_devfs_enable="NO" # mount devfs in the jail
#jail_example_fdescfs_enable="NO" # mount fdescfs in the jail
#jail_example_procfs_enable="NO" # mount procfs in jail
#jail_example_devfs_ruleset="ruleset_name" # devfs ruleset to apply
to jail
--
Ryan Sommers
ryans at gamersimpact.com
More information about the freebsd-current
mailing list