[PATCH] nForce2 SMBus support - nForce3/4 support added. Not tested yet

[Artemiev Igor]

On Wed, 7 Dec 2005 12:56:49 +0300
Vladimir Timofeev <vovkasm at gmail.com> wrote:

> Thanks for ansver. I'll also try studing xmbmon sources ;-)
> I use xmbmon from latest ports - xmbmon-205_1

I assume, that mbmon can't recognize the chip. I tested another board
from Asus with nForce2 chipset, and it worked perfectly. Possibly, you
should set the chip type by -p, if that is the case. It's not a driver
problem. 

%mbmon -S -d

Using SMBus access method[NVidia nForce2]!!
* Asus Chip ASB100(Bach) found.

%mbmon -S

Temp.= 41.0, 25.0, 30.0; Rot.= 5314,    0,    0
Vcore = 1.68, 1.68; Volt. = 3.30, 4.92, 11.80, -10.79, -4.66

Temp.= 41.0, 25.0, 30.0; Rot.= 5314,    0,    0
Vcore = 1.70, 1.70; Volt. = 3.26, 4.92, 11.80, -10.79, -4.66

Temp.= 41.0, 25.0, 30.0; Rot.= 5357,    0,    0
Vcore = 1.68, 1.68; Volt. = 3.30, 4.92, 11.80, -10.79, -4.66

I've also added the support for nForce3/4, like with lm_sensors,
but haven't tested a new patch:

http://bmc.brk.ru/~ai/patches/amdpm.nforce2_support.diff

You may try it with an other chipsets, if you want.

-- 
iprefetch ai