Problems with fxp0 and wi0 devices

[Rauf Kuliyev]

Matt,

Try to add hw.pci.allow_unsupported_io_range=1 to /boot/loader.conf

Regards,
Rauf




Matt Emmerton wrote:

>I'm running FreeBSD 5.2.1-RELEASE on a ThinkPad T23 and I can't use either
>of the built-in fxp0 or wi0 network adapters.
>
>Whenever I try and configure them with dhclient, dhclient just hangs.
>Whenever I try and configure them manually (static IP and route), packets
>never go anywhere.
>Whenever I access fxp0, I get "fxp0: device timeout" messages on my screen.
>
>I looked through cvsweb and didn't see anything that looked useful post
>5.2.1-REL.
>
>Here is the relevant part of dmesg:
>
>fxp0: <Intel 82801CAM (ICH3) Pro/100 VE Ethernet> port 0x7000-0x703f mem
>0xc0200000-0xc0200fff irq 11 at device 8.0 on pci2
>fxp0: Ethernet address 00:d0:59:33:b2:eb
>
>wi0: <Intersil Prims2.5> mem 0xec000000-0xec000fff irq 11 at device 2.0 on
>pci2
>wi0: 802.11 address: 00:20:e0:89:4e:0c
>wi0: using RF:PRIMS2.5 MAC:ISL3874A(Mini-PCI)
>wi0: Intersil Firmware: Primary (1.0.5), Station (1.3.3)
>wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
>
>And pciconf -l:
>
>fxp0 at pci2:8:0:  class=0x020000 card=0x02091014 chip=0x10318086 rev=0x41
>hdr=0x00
>wi0 at pci2:2:0:  class=0x020000 card=0x40461668 chip=0x30731260 rev=0x01
>hdr=0x00
>
>--
>Matt Emmerton
>
>_______________________________________________
>freebsd-current at freebsd.org mailing list
>http://lists.freebsd.org/mailman/listinfo/freebsd-current
>To unsubscribe, send any mail to "freebsd-current-unsubscribe at freebsd.org"
>  
>