em0 dead after suspend/restore on t40
Randy Bush
randy at psg.com
Wed Mar 24 06:19:44 PST 2004
> do you have 'hw.pci.allow_unsupported_io_range="1"' in your /boot/loader.conf
> files?
>
> :on a t40 running -current, i will often, but not always, see
> :
> : em0: Link is up 1000 Mbps Full Duplex
> : ...
> : em0: The EEPROM Checksum Is Not Valid
> : em0: Unable to initialize the hardware
> : em0: The EEPROM Checksum Is Not Valid
> : em0: Unable to initialize the hardware
> :
> :on a resume. after a reboot,
> :
> : em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> \
> : port 0x8000-0x803f mem 0xc0200000-0xc020ffff,0xc0220000-0xc023ffff \
> : irq 11 at device 1.0 on pci2
> : em0: Ethernet address: 00:0d:60:3b:5c:df
> : em0: Speed:N/A Duplex:N/A
> : ...
> : em0: Link is up 1000 Mbps Full Duplex
> :
> :it will work fine.
yes, in /boot/loader.conf.local
randy
---
Q: Because it reverses the logical flow of conversation.
A: Why is top posting frowned upon?
More information about the freebsd-current
mailing list