SATA raid freebsd

[Derek Ragona]

That motherboard has two versions, one with just a 2-port SATA/RAID on ICH5 
and another with an additional 4-port SATA/RAID from Promise.

I know the Promise RAID controllers are better supported by FreeBSD, so it 
may be if you are using the ICH5 RAID may not be supported by FreeBSD.  You 
should probably check with Søren Schmidt on what RAID is supported.



         -Derek


At 01:37 PM 3/20/2004, =?iso-8859-2?Q?G=E9czi?= Szabolcs wrote:
>On Sat, Mar 20, 2004 at 08:55:30AM -0600, Derek Ragona wrote:
> > You need to enable the channels you want to use for RAID, the utility 
> is on
> > the intel website.  Then make your array in the firmware utility.
> >
> > Only after you have the array created, do you go on and install an OS.
> >
> >         -Derek
> >
>
>as a matter of fact I couldn't install OS to the array.
>because the freebsd installer couldn't see the array...
>
>--
>Géczi Szabolcs
>GPG: http://www.goodwill.hu/~szabszi/szabszi.asc
>Fingerprint: B36C 150C C316 5A15 DB5F  183A 303B 5AEB 36C2 3162
>_______________________________________________
>freebsd-current at freebsd.org mailing list
>http://lists.freebsd.org/mailman/listinfo/freebsd-current
>To unsubscribe, send any mail to "freebsd-current-unsubscribe at freebsd.org"