SATA raid freebsd

[Derek Ragona]

You need to enable the channels you want to use for RAID, the utility is on 
the intel website.  Then make your array in the firmware utility.

Only after you have the array created, do you go on and install an OS.

         -Derek


At 08:18 AM 3/20/2004, =?iso-8859-2?Q?G=E9czi?= Szabolcs wrote:
>Hi there,
>
>I got an intel server board (s875wp1-e) and it has a sata raid controller.
>my dmesg said this:
>
>atapci0: <Promise PDC20319 SATA150 controller> port
>0xb000-0xb07f,0xb400-0xb40f,0xbc00-0xbc3f mem
>0xfeaa0000-0xfeabffff,0xfeafe000-0xfeafefff irq 17 at device 7.0 on pci3
>
>atapci2: <Intel ICH5 SATA150 controller> port
>0xdc00-0xdc0f,0xe000-0xe003,0xe400-0xe407,0xe800-0xe803,0xec00-0xec07 irq 18
>at device 31.2 on pci0
>
>
>How can I make workable the sata raid under freebsd-current?
>
>thx
>
>szabszi
>--
>Géczi Szabolcs
>GPG: http://www.goodwill.hu/~szabszi/szabszi.asc
>Fingerprint: B36C 150C C316 5A15 DB5F  183A 303B 5AEB 36C2 3162
>_______________________________________________
>freebsd-current at freebsd.org mailing list
>http://lists.freebsd.org/mailman/listinfo/freebsd-current
>To unsubscribe, send any mail to "freebsd-current-unsubscribe at freebsd.org"