5.2.1-RELEASE boot-hang with Cyclades pci card Cyclom-16YeP/RJ45
Peter Olsson
pol at leissner.se
Mon Mar 15 12:23:56 PST 2004
Hello!
We use several Cyclades port cards in FreeBSD 4.x.
I tried upgrading one of the servers to 5.2.1 this week, but
it just hung after recognizing the Cyclades card during boot.
If I disconnected the external cable from the pci card the boot went
fine, so it seems that it was some scanning of the external port card
that generated the problem.
Here are the boot messages just before the boot process hung:
cy0: <Cyclades Cyclom-Y Serial Adapter> port 0xa400-0xa47f
mem 0xd0034000-0xd0037fff, 0xd0039000-0xd003907f irq 18 at
device 10.0 on pci1
pcib1: device cy0 requested decoded I/O range 0xa400-0xa47f
pcib1: device cy0 requested decoded memory range 0xd0034000-0xd0037fff
Is anyone using Cyclades port cards in 5.2.1?
Is there some way to get rid of the need to include COMPAT_OLDISA for
the cyclades driver (is there some way to make a separate pci driver or
just strip the isa code from the driver)?
Thanks!
--
Peter Olsson pol at leissner.se
CCIE #8963 +46 520 500511
Leissner Data AB +46 701 809511
More information about the freebsd-current
mailing list