USB woes.
Ian FREISLICH
if at hetzner.co.za
Thu Jun 17 13:50:38 GMT 2004
> OK - we have a problem, but we don't know which :(
> Add USB_DEBUG to your kernel and you should get more data out of this
> case.
I'll send output tomorrow or later tonight.
> > If I boot with the device attached, 'usbdevs -v' pauses for quite
> > a long time and gives the correct probe line:
> >
> > [brane-dead] ~ # usbdevs -v
> > Controller /dev/usb0:
> > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x
0000), rev 1.00
> > port 1 powered
> > port 2 addr 2: full speed, power 500 mA, config 1, Flash Reader(0xa600), D
ATAFAB(0x07c4), rev 1.19
>
> Interesting.
>
> > However, the device is still unusable.
>
> Mmm - but usbdevs gets it's data by directly talking to the device, so
> everytime you invoke usbdevs the device is involved.
> What excactly is _unuseable_?
Just did enough stuff to get these, but now the machine has locked
up, so I can do no more before I get home.
umass0: BBB reset failed, TIMEOUT
umass0: BBB bulk-in clear stall failed, TIMEOUT
umass0: BBB bulk-out clear stall failed, TIMEOUT
umass0: BBB reset failed, TIMEOUT
umass0: BBB bulk-in clear stall failed, TIMEOUT
umass0: BBB bulk-out clear stall failed, TIMEOUT
umass0: BBB reset failed, TIMEOUT
Ian
--
Ian Freislich
More information about the freebsd-current
mailing list