PS/2 mouse problem with acpi on -CURRENT
LuoHong
luohong99 at mails.tsinghua.edu.cn
Sat Jul 31 04:37:37 PDT 2004
Since May, I found that my mouse ran abnormally if ACPI was enabled,
the cursor was only updated about once a second. Someone had sent a pr,
which
was 55473, and it presented an approach to fix it. But it still can not work
though I do the thing according to the pr. The only method is disabling
ACPI.
Is there any better approach to fix it?
The motherboard is Iwill KK266 with Award BIOS.
Here's the dmesg of my system:
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #0: Sat Jul 31 17:34:57 CST 2004
root at bfdream.9966.org:/freebsd/obj/freebsd/HEAD/src/sys/BFDREAM
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) processor (997.81-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x642 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,
PAT,PSE36,MMX,FXSR>
AMD Features=0xc0440000<RSVD,AMIE,DSP,3DNow!>
real memory = 805240832 (767 MB)
avail memory = 782876672 (746 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 10 Entries> on motherboard
pci0: <PCI bus> on pcib0
agp0: <VIA 82C8363 (Apollo KT133A) host to PCI bridge> mem
0xd0000000-0xd7ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
$PIR: ROUTE_INTERRUPT failed.
drm0: <ATI Radeon QD R100> port 0xc000-0xc0ff mem
0xe1000000-0xe107ffff,0xd8000000-0xdfffffff irq 9 at device 0.0 on pci1
info: [drm] AGP at 0xd0000000 128MB
info: [drm] Initialized radeon 1.11.0 20020828 on minor 0
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686B UDMA100 controller> port
0xd000-0xd00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
atapci0: Correcting VIA config for southbridge data corruption bug
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, USB> at device 7.2 (no driver attached)
pci0: <serial bus, USB> at device 7.3 (no driver attached)
pci0: <bridge, PCI-unknown> at device 7.4 (no driver attached)
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xdc00-0xdc3f mem
0xe3000000-0xe30fffff,0xe3100000-0xe3100fff irq 10 at device 11.0 on pci0
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:90:27:59:62:91
fxp0: [GIANT-LOCKED]
pci0: <network, ethernet> at device 12.0 (no driver attached)
pcm0: <CMedia CMI8738> port 0xe400-0xe4ff irq 10 at device 15.0 on pci0
cpu0 on motherboard
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
Timecounter "TSC" frequency 997805648 Hz quality 800
Timecounters tick every 10.000 msec
ATAPI_RESET time = 20us
ad0: 117800MB <HDS722512VLAT20> [239340/16/63] at ata0-master UDMA100
acd0: CDROM <ATAPI-CD ROM-DRIVE-50MAX> at ata0-slave UDMA33
ad1: 39266MB <IC35L040AVER07-0> [79780/16/63] at ata1-master UDMA100
Mounting root from ufs:/dev/ad0s1a
Thank you and Best Regards,
Luo Hong
More information about the freebsd-current
mailing list