TP 600 and ACPI IRQ routing problems
Wiktor Niesiobedzki
bsd at w.evip.pl
Thu Jan 29 10:23:36 PST 2004
Hi,
After giving a shot yesterdays CURRENT I still can't get ACPI and PCCARD
cooperating on my Thinkpad 600. As far as I recognize the problem, it lies in
that acpi assignes irq 3 to cbb device, what apparently isn't the best choice.
I've tried following setting in loader.conf:
hw.acpi.pci.link.0.3.0.irq=9
hw.acpi.pci.link.0.7.3.irq=10
hw.acpi.pci.link.0.2.0.irq=11
hw.acpi.pci.link.0.2.1.irq=10
But it seems that they plainly just not work. Without ACPI cardbus is working,
but only the first slot.
Anyone has any clues, how to get these things work together?
Verbose boot with acpi enabled and disabled attached.
TIA
Wiktor Niesiobedzki
-------------- next part --------------
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #1: Thu Jan 29 16:52:38 CET 2004
root@:/usr/obj/usr/src/sys/L_NC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc07f0000.
Preloaded elf module "/boot/kernel/umass.ko" at 0xc07f0228.
Preloaded elf module "/boot/kernel/cam.ko" at 0xc07f02d4.
Preloaded elf module "/boot/kernel/usb.ko" at 0xc07f037c.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc07f0424.
Calibrating clock(s) ... i8254 clock: 1193102 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 265265174 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (265.27-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 134021120 (127 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000826000 - 0x0000000007d60fff, 122925056 bytes (30011 pages)
avail memory = 125640704 (119 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fd800
bios32: Entry = 0xfd820 (c00fd820) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd880+0x0
pnpbios: Found PnP BIOS data at 0xc00fe700
pnpbios: Entry = f0000:e724 Rev = 1.0
pnpbios: Event flag at 415
Other BIOS signatures found:
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <IBM TP600> on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x000038c8
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71928086)
pcibios: BIOS version 2.10
Using $PIR table, 4 entries at 0xc00f9e10
PCI-Only Interrupts: 11
Location Bus Device Pin Link IRQs
embedded 0 7 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 7 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 2 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 2 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 3 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 4 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 4 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 4 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 4 D 0x63 3 4 5 6 7 9 10 11 12 14 15
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 1 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 2 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 2 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 7 func 3
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 7 func 1
acpi0: Power Button (fixed)
ACPI timer looks BAD min = 3, max = 6, width = 3
ACPI timer looks BAD min = 3, max = 6, width = 3
ACPI timer looks BAD min = 3, max = 6, width = 3
ACPI timer looks BAD min = 3, max = 6, width = 3
ACPI timer looks BAD min = 3, max = 6, width = 3
ACPI timer looks BAD min = 3, max = 6, width = 3
ACPI timer looks BAD min = 3, max = 6, width = 3
ACPI timer looks BAD min = 3, max = 6, width = 3
ACPI timer looks BAD min = 3, max = 6, width = 3
ACPI timer looks BAD min = 3, max = 6, width = 3
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 0 func 1
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xef08-0xef0b on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
acpi_tz0: <Thermal Zone> port 0x530-0x537 on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
acpi_tz1: <Thermal Zone> port 0x530-0x537 on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
acpi_tz2: <Thermal Zone> port 0x530-0x537 on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
unknown: not probed (disabled)
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\\_SB_.LNKD irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.7.3
\\_SB_.LNKA irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.2.0
\\_SB_.LNKB irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.2.1
\\_SB_.LNKA irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.3.0
\\_SB_.LNKB irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.5.0
\\_SB_.LNKA irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.6.0
---- before setting priority for links ------------
\\_SB_.LNKD:
interrupts: 3 4 5 6 7 9 10 11 12 14 15
penalty: 1660 1660 660 1660 1660 660 660 660 1660 10660 10660
references: 1
priority: 0
\\_SB_.LNKA:
interrupts: 3 4 5 6 7 9 10 11 12 14 15
penalty: 1660 1660 660 1660 1660 660 660 660 1660 10660 10660
references: 3
priority: 0
\\_SB_.LNKB:
interrupts: 3 4 5 6 7 9 10 11 12 14 15
penalty: 1660 1660 660 1660 1660 660 660 660 1660 10660 10660
references: 2
priority: 0
---- before fixup boot-disabled links -------------
\\_SB_.LNKA:
interrupts: 3 4 5 6 7 9 10 11 12 14 15
penalty: 1660 1660 660 1660 1660 660 660 660 1660 10660 10660
references: 3
priority: 8798
\\_SB_.LNKB:
interrupts: 3 4 5 6 7 9 10 11 12 14 15
penalty: 1660 1660 660 1660 1660 660 660 660 1660 10660 10660
references: 2
priority: 5865
\\_SB_.LNKD:
interrupts: 3 4 5 6 7 9 10 11 12 14 15
penalty: 1660 1660 660 1660 1660 660 660 660 1660 10660 10660
references: 1
priority: 2932
---- after fixup boot-disabled links --------------
\\_SB_.LNKA:
interrupts: 11 10 9 5 12 7 6 4 3 15 14
penalty: 660 660 660 660 1660 1660 1660 1660 1660 10660 10660
references: 3
priority: 8798
\\_SB_.LNKB:
interrupts: 11 10 9 5 12 7 6 4 3 15 14
penalty: 660 660 660 660 1660 1660 1660 1660 1660 10660 10660
references: 2
priority: 5865
\\_SB_.LNKD:
interrupts: 11 10 9 5 12 7 6 4 3 15 14
penalty: 660 660 660 660 1660 1660 1660 1660 1660 10660 10660
references: 1
priority: 2932
---- arbitrated configuration ---------------------
\\_SB_.LNKD irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.7.3
\\_SB_.LNKA irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.2.0
\\_SB_.LNKB irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.2.1
\\_SB_.LNKA irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.3.0
\\_SB_.LNKB irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.5.0
\\_SB_.LNKA irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.6.0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base 00000000, size 28, enabled
found-> vendor=0x8086, dev=0x7192, revid=0x02
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0xa200, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base 20301000, size 12, enabled
found-> vendor=0x104c, dev=0xac16, revid=0x02
bus=0, slot=2, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0xa8 (5040 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns)
intpin=a, irq=255
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 20300000, size 12, enabled
found-> vendor=0x104c, dev=0xac16, revid=0x02
bus=0, slot=2, func=1
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0xa8 (5040 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns)
intpin=b, irq=255
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 3, range 32, base e0000000, size 24, enabled
map[14]: type 1, range 32, base 20000000, size 21, enabled
map[18]: type 1, range 32, base 20200000, size 20, enabled
pcib0: matched entry for 0.3.INTA (source \\_SB_.LNKA)
pcib0: possible interrupts: 3 4 5 6 7 9 10 11 12 14 15
pcib0: slot 3 INTA routed to irq 3 via \\_SB_.LNKA
found-> vendor=0x10c8, dev=0x0004, revid=0x01
bus=0, slot=3, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x10 (4000 ns), maxlat=0xff (63750 ns)
intpin=a, irq=3
found-> vendor=0x8086, dev=0x7110, revid=0x01
bus=0, slot=7, func=0
class=06-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000fcf0, size 4, enabled
found-> vendor=0x8086, dev=0x7111, revid=0x01
bus=0, slot=7, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x30 (1440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 00008400, size 5, enabled
pcib0: matched entry for 0.7.INTD (source \\_SB_.LNKD)
pcib0: possible interrupts: 3 4 5 6 7 9 10 11 12 14 15
pcib0: slot 7 INTD routed to irq 3 via \\_SB_.LNKD
found-> vendor=0x8086, dev=0x7112, revid=0x01
bus=0, slot=7, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x30 (1440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=3
map[90]: type 4, range 32, base 0000efa0, size 4, enabled
found-> vendor=0x8086, dev=0x7113, revid=0x01
bus=0, slot=7, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
cbb0: <TI1250 PCI-CardBus Bridge> mem 0x20301000-0x20301fff at device 2.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib0: matched entry for 0.2.INTA (source \\_SB_.LNKA)
pcib0: possible interrupts: 3 4 5 6 7 9 10 11 12 14 15
pcib0: slot 2 INTA routed to irq 3 via \\_SB_.LNKA
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
0x00: 0xac16104c 0x02100007 0x06070002 0x0082a808
0x10: 0x20301000 0x020000a0 0xb0030100 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc
0x30: 0x00000000 0x0000fffc 0x00000000 0x07400103
0x40: 0x00921014 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00449061 0x00000000 0x09818148 0xfba97543
0x90: 0x606202c0 0x00000000 0x00000000 0x00000000
0xa0: 0x7e210001 0x00800000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
cbb1: <TI1250 PCI-CardBus Bridge> mem 0x20300000-0x20300fff at device 2.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pcib0: matched entry for 0.2.INTB (source \\_SB_.LNKB)
pcib0: possible interrupts: 3 4 5 6 7 9 10 11 12 14 15
pcib0: slot 2 INTB routed to irq 3 via \\_SB_.LNKB
cbb1: [MPSAFE]
cbb1: PCI Configuration space:
0x00: 0xac16104c 0x02100007 0x06070002 0x0082a808
0x10: 0x20300000 0x020000a0 0xb0060400 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc
0x30: 0x00000000 0x0000fffc 0x00000000 0x07400203
0x40: 0x00921014 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00449061 0x00000000 0x09818148 0xfba97543
0x90: 0x606202c0 0x00000000 0x00000000 0x00000000
0xa0: 0x7e210001 0x00800000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
pci0: <display, VGA> at device 3.0 (no driver attached)
PCI-ISA bridge with incorrect subclass 0x80
PCI-ISA bridge with incorrect subclass 0x80
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0xfcf0-0xfcff at device 7.1 on pci0
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: reset tp1 mask=01 ostat0=51 ostat1=fd
ata1-master: stat=0x10 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 mask=01 stat0=10 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x8400-0x841f irq 3 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0x1 0x1 0x1 0x1
sio0: probe failed test(s): 1 4 6 9
unknown: not probed (disabled)
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 port 0x3f8-0x3ff irq 4 drq 3 on acpi0
sio0: type 16550A
unknown: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x54ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: unable to allocate IRQ
psmcpnp0 irq 12 on acpi0
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
acpi_ec0: <Embedded Controller: GPE 0x9, GLK> port 0x66,0x62 on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
acpi_ec0: info: new max delay is 2 us
acpi_ec0: info: new max delay is 4 us
acpi_ec0: info: new max delay is 7 us
acpi_ec0: info: new max delay is 10 us
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
acpi_ec0: info: new max delay is 25 us
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
sio1: configured irq 4 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x1 0x1 0x1 0x1
sio1: probe failed test(s): 1 4 6 9
unknown: not probed (disabled)
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
sio: sio0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xc0000-0xc9fff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 irq 9 on isa0
pcic1: not probed (disabled)
mss_detect - chip revision 0x0a
mss_detect() - Detected CS4236
pcm0: <CS4236> at port 0xf8c-0xf94,0xe0e,0x52c-0x533 irq 5 drq 1 flags 0xa110 on isa0
pcm0: sndbuf_setmap 225000, 1000; 0xc934c000 -> 225000
pcm0: sndbuf_setmap 22b000, 1000; 0xc934d000 -> 22b000
ppc0 failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1 failed to probe at port 0x3f8 irq 4 drq 3 flags 0x1 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
Timecounter "TSC" frequency 265265174 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
acpi_cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
acpi_cmbat0: battery initialization start
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
pccard0: CIS version PCCARD 2.0 or 2.1
pccard0: CIS info: Linksys, EtherFast 10/100 Integrated PC Card (PCM100), Ver 1.0,
pccard0: Manufacturer code 0x149, product 0xc1ab
pccard0: function 0: network adapter, ccr addr 400 mask 1
pccard0: function 0, config table entry 16: I/O card; irq mask befc; iomask 5, iospace 0-1f; mwait_required io16 irqlevel
pccard0: function 0, config table entry 1: I/O card; irq mask befc; iomask a, iospace 300-31f; mwait_required io16 irqlevel
pccard0: function 0, config table entry 2: I/O card; irq mask befc; iomask a, iospace 320-33f; mwait_required io16 irqlevel
pccard0: function 0, config table entry 3: I/O card; irq mask befc; iomask a, iospace 340-35f; mwait_required io16 irqlevel
pccard0: function 0, config table entry 4: I/O card; irq mask befc; iomask a, iospace 380-39f; mwait_required io16 irqlevel
pccard0: function 0, config table entry 5: I/O card; irq mask befc; iomask a, iospace 200-21f; mwait_required io16 irqlevel
pccard0: function 0, config table entry 6: I/O card; irq mask befc; iomask a, iospace 220-23f; mwait_required io16 irqlevel
pccard0: function 0, config table entry 7: I/O card; irq mask befc; iomask a, iospace 240-25f; mwait_required io16 irqlevel
ed1: <Linksys EtherFast 10/100 Integrated PC Card (PCM100)> at port 0x100-0x11f irq 3 function 0 config 16 on pccard0
ed1: bpf attached
ed1: address 00:04:5a:9e:63:51, type Linksys (16 bit)
miibus0: <MII bus> on ed1
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x080017, model 0x0002, rev. 3
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: setting PIO4 on Intel PIIX4 chip
ata0-master: setting UDMA33 on Intel PIIX4 chip
ad0: <FUJITSU MHN2200AT/7256> ATA-5 disk at ata0-master
ad0: 19077MB (39070080 sectors), 38760 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
GEOM: new disk ad0
ata1-master: pio=0x0c wdma=0x22 udma=0xffffffff cable=40pin
ata1-master: setting PIO4 on Intel PIIX4 chip
acd0: <TOSHIBA CD-ROM XM-1702BC/1562> CDROM drive at ata1 as master
acd0: read 4134KB/s (4134KB/s), 128KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
[0] f:00 typ:7 s(CHS):0/1/1 e(CHS):1023/15/63 s:63 l:4188177
[1] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/15/63 s:4188240 l:34881840
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 2144346624 end 2144378879
GEOM: Configure ad0s2, start 2144378880 length 17859502080 end 20003880959
GEOM: Configure ad0s2a, start 0 length 268435456 end 268435455
GEOM: Configure ad0s2b, start 268435456 length 268435456 end 536870911
GEOM: Configure ad0s2c, start 0 length 17859502080 end 17859502079
GEOM: Configure ad0s2d, start 536870912 length 268435456 end 805306367
GEOM: Configure ad0s2e, start 805306368 length 17054195712 end 17859502079
Mounting root from ufs:/dev/ad0s2a
start_init: trying /sbin/init
pid 440 (sendmail), uid 0: exited on signal 11
acpi_tz1: _AC0: temperature 42.8 >= setpoint 36.5
acpi_tz1: switched from NONE to _AC0: 42.8C
acpi_cmbat0: battery initialization failed, giving up
ed1: device timeout
ed1: device timeout
ed1: device timeout
ed1: device timeout
ed1: device timeout
ed1: device timeout
ed1: device timeout
ed1: device timeout
ed1: device timeout
ed1: device timeout
ed1: device timeout
-------------- next part --------------
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #1: Thu Jan 29 16:52:38 CET 2004
root@:/usr/obj/usr/src/sys/L_NC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc07f6000.
Preloaded elf module "/boot/kernel/umass.ko" at 0xc07f6228.
Preloaded elf module "/boot/kernel/cam.ko" at 0xc07f62d4.
Preloaded elf module "/boot/kernel/usb.ko" at 0xc07f637c.
Preloaded elf module "/boot/kernel/apm.ko" at 0xc07f6424.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc07f64cc.
Calibrating clock(s) ... i8254 clock: 1193105 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 265264998 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (265.26-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 134021120 (127 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000826000 - 0x0000000007d60fff, 122925056 bytes (30011 pages)
avail memory = 125640704 (119 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fd800
bios32: Entry = 0xfd820 (c00fd820) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd880+0x0
pnpbios: Found PnP BIOS data at 0xc00fe700
pnpbios: Entry = f0000:e724 Rev = 1.0
pnpbios: Event flag at 415
Other BIOS signatures found:
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: Other PM system enabled.
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000064
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71928086)
pcibios: BIOS version 2.10
Using $PIR table, 4 entries at 0xc00f9e10
PCI-Only Interrupts: 11
Location Bus Device Pin Link IRQs
embedded 0 7 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 7 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 2 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 2 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 3 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 4 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 4 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 4 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 4 D 0x63 3 4 5 6 7 9 10 11 12 14 15
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base 00000000, size 28, enabled
found-> vendor=0x8086, dev=0x7192, revid=0x02
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0xa200, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base 20301000, size 12, enabled
found-> vendor=0x104c, dev=0xac16, revid=0x02
bus=0, slot=2, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0xa8 (5040 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns)
intpin=a, irq=255
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 20300000, size 12, enabled
found-> vendor=0x104c, dev=0xac16, revid=0x02
bus=0, slot=2, func=1
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0xa8 (5040 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns)
intpin=b, irq=255
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 3, range 32, base e0000000, size 24, enabled
map[14]: type 1, range 32, base 20000000, size 21, enabled
map[18]: type 1, range 32, base 20200000, size 20, enabled
pci_cfgintr_valid: BIOS irq 11 is valid
pci_cfgintr: 0:3 INTA BIOS irq 11
found-> vendor=0x10c8, dev=0x0004, revid=0x01
bus=0, slot=3, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x10 (4000 ns), maxlat=0xff (63750 ns)
intpin=a, irq=11
found-> vendor=0x8086, dev=0x7110, revid=0x01
bus=0, slot=7, func=0
class=06-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000fcf0, size 4, enabled
found-> vendor=0x8086, dev=0x7111, revid=0x01
bus=0, slot=7, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x30 (1440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 00008400, size 5, enabled
pci_cfgintr_valid: BIOS irq 11 is valid
pci_cfgintr: 0:7 INTD BIOS irq 11
found-> vendor=0x8086, dev=0x7112, revid=0x01
bus=0, slot=7, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x30 (1440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
map[90]: type 4, range 32, base 0000efa0, size 4, enabled
found-> vendor=0x8086, dev=0x7113, revid=0x01
bus=0, slot=7, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
cbb0: <TI1250 PCI-CardBus Bridge> mem 0x20301000-0x20301fff at device 2.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pci_cfgintr_search: linked (60) to configured irq 11 at 0:3:0
pci_cfgintr: 0:2 INTA routed to irq 11
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
0x00: 0xac16104c 0x02100007 0x06070002 0x0082a808
0x10: 0x20301000 0x020000a0 0xb0030100 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc
0x30: 0x00000000 0x0000fffc 0x00000000 0x0740010b
0x40: 0x00921014 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x0044b060 0x00000000 0x09818148 0xfba97543
0x90: 0x606282c0 0x00000000 0x00000000 0x00000000
0xa0: 0x7e210001 0x00800000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
cbb1: <TI1250 PCI-CardBus Bridge> mem 0x20300000-0x20300fff at device 2.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pci_cfgintr_virgin: using routable PCI-only interrupt 11
pci_cfgintr: ROUTE_INTERRUPT failed.
cbb: Unable to map IRQ...
device_probe_and_attach: cbb1 attach returned 12
pci0: <display, VGA> at device 3.0 (no driver attached)
PCI-ISA bridge with incorrect subclass 0x80
PCI-ISA bridge with incorrect subclass 0x80
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0xfcf0-0xfcff at device 7.1 on pci0
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: reset tp1 mask=01 ostat0=51 ostat1=fd
ata1-master: stat=0x10 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 mask=01 stat0=10 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x8400-0x841f irq 11 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
pnpbios: 23 devices, largest 980 bytes
PNP0200: adding fixed io range 0-0xf, size=0x10, align=0x1
PNP0200: adding fixed io range 0x80-0x8f, size=0x10, align=0x1
PNP0200: adding fixed io range 0xc0-0xdf, size=0x20, align=0x1
PNP0200: adding dma mask 0x10
pnpbios: handle 1 device ID PNP0200 (0002d041)
PNP0100: adding irq mask 0x1
PNP0100: adding fixed io range 0x40-0x43, size=0x4, align=0x1
pnpbios: handle 2 device ID PNP0100 (0001d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding fixed io range 0x70-0x73, size=0x4, align=0x1
pnpbios: handle 3 device ID PNP0b00 (000bd041)
PNP0800: adding fixed io range 0x61-0x61, size=0x1, align=0x1
pnpbios: handle 4 device ID PNP0800 (0008d041)
PNP0303: adding irq mask 0x2
PNP0303: adding fixed io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding fixed io range 0x64-0x64, size=0x1, align=0x1
pnpbios: handle 5 device ID PNP0303 (0303d041)
IBM3780: adding irq mask 0x1000
pnpbios: handle 6 device ID IBM3780 (80374d24)
PNP0c04: adding fixed io range 0xf0-0xff, size=0x10, align=0x1
PNP0c04: adding irq mask 0x2000
pnpbios: handle 7 device ID PNP0c04 (040cd041)
PNP0700: adding irq mask 0x40
PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x80
PNP0700: adding dma mask 0x4
pnpbios: handle 8 device ID PNP0700 (0007d041)
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0
pnpbios: handle 9 device ID PNP0a03 (030ad041)
PNP0c02: adding io range 0x22-0x22, size=0x1, align=0
PNP0c02: adding io range 0x2e-0x2f, size=0x2, align=0
PNP0c02: adding io range 0x92-0x92, size=0x1, align=0
PNP0c02: adding io range 0xb2-0xb3, size=0x2, align=0
PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0
PNP0c02: adding io range 0x15e0-0x15ef, size=0x10, align=0
PNP0c02: adding io range 0xef00-0xefaf, size=0xb0, align=0
PNP0c02: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c02: adding fixed memory32 range 0xf0000-0xfffff, size=0x10000
PNP0c02: adding fixed memory32 range 0x100000-0x7ffffff, size=0x7f00000
PNP0c02: adding fixed memory32 range 0xffff0000-0xffffffff, size=0x10000
pnpbios: handle 10 device ID PNP0c02 (020cd041)
PNP0400: adding irq mask 0x80
PNP0400: adding io range 0x3bc-0x3bf, size=0x4, align=0
pnpbios: handle 11 device ID PNP0400 (0004d041)
pnpbios: handle 13 device ID PNP0501 (0105d041)
CSC0000: adding io range 0x530-0x537, size=0x8, align=0
CSC0000: adding io range 0x388-0x38b, size=0x4, align=0
CSC0000: adding io range 0x220-0x233, size=0x14, align=0x20
CSC0000: adding irq mask 0x20
CSC0000: adding dma mask 0x2
CSC0000: adding dma mask 0x1
pnpbios: handle 14 device ID CSC0000 (0000630e)
CSC0010: adding io range 0x538-0x53f, size=0x8, align=0
pnpbios: handle 15 device ID CSC0010 (1000630e)
CSC0001: adding io range 0x200-0x207, size=0x8, align=0
pnpbios: handle 16 device ID CSC0001 (0100630e)
pnpbios: handle 17 device ID CSC0003 (0300630e)
IBM3760: adding io range 0x130-0x13f, size=0x10, align=0
IBM3760: adding io range 0x2f8-0x2ff, size=0x8, align=0
IBM3760: adding irq mask 0x8
IBM3760: adding irq mask 0x400
IBM3760: adding dma mask 0x80
pnpbios: handle 18 device ID IBM3760 (60374d24)
IBM0071: adding irq mask 0x10
IBM0071: adding io range 0x3f8-0x3ff, size=0x8, align=0x1
IBM0071: adding dma mask 0x8
pnpbios: handle 19 device ID IBM0071 (71004d24)
PNP0e03: adding io range 0-0x1, size=0x2, align=0
pnpbios: handle 20 device ID PNP0e03 (030ed041)
PNP0680: adding irq mask 0x4000
PNP0680: adding io range 0x1f0-0x1f7, size=0x8, align=0
PNP0680: adding io range 0x3f6-0x3f7, size=0x2, align=0
PNP0680: adding io range 0xfcf0-0xfcf7, size=0x8, align=0
pnpbios: handle 23 device ID PNP0680 (8006d041)
PNP0680: adding irq mask 0x8000
PNP0680: adding io range 0x170-0x177, size=0x8, align=0
PNP0680: adding io range 0x376-0x376, size=0x1, align=0
PNP0680: adding io range 0xfcf8-0xfcff, size=0x8, align=0
pnpbios: handle 25 device ID PNP0680 (8006d041)
PNP0c02: adding fixed memory32 range 0xca000-0xcbfff, size=0x2000
pnpbios: handle 27 device ID PNP0c02 (020cd041)
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xc0000-0xc9fff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x54ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 irq 9 on isa0
pcic1: not probed (disabled)
mss_detect - chip revision 0x0a
mss_detect() - Detected CS4236
pcm0: <CS4236> at port 0xf8c-0xf94,0xe0e,0x52c-0x533 irq 5 drq 1 flags 0xa110 on isa0
pcm0: sndbuf_setmap 20b000, 1000; 0xc934a000 -> 20b000
pcm0: sndbuf_setmap 211000, 1000; 0xc934b000 -> 211000
ppc0 failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: configured irq 3 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0x1 0x1 0x1 0x1
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0 at port 0x2f8-0x2ff irq 3 flags 0x11 on isa0
sio0: type 8250 or not responding
sio1: irq maps: 0x1 0x11 0x1 0x1
sio1 at port 0x3f8-0x3ff irq 4 drq 3 flags 0x1 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
unknown: <PNP0800> failed to probe at port 0x61 on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 on isa0
unknown: <IBM3780> can't assign resources (irq)
unknown: <IBM3780> at irq 12 on isa0
unknown: <PNP0700> failed to probe at port 0x3f0-0x3f5 irq 6 drq 2 on isa0
unknown: <PNP0c02> can't assign resources (port)
unknown: <PNP0c02> at port 0x4d0-0x4d1,0xb2-0xb3,0x92,0x2e-0x2f,0x22 iomem 0xffff0000-0xffffffff,0x100000-0x7ffffff,0xf0000-0xfffff,0-0x9ffff on isa0
unknown: <PNP0400> failed to probe at port 0x3bc-0x3bf irq 7 on isa0
unknown: <16550A-compatible COM port> failed to probe on isa0
unknown: <CSC0000> can't assign resources (irq)
unknown: <CSC0000> at port 0x220-0x233,0x388-0x38b,0x534-0x53b irq 5 on isa0
unknown: <CSC0010> failed to probe at port 0x538-0x53f on isa0
unknown: <CSC0001> failed to probe at port 0x200-0x207 on isa0
unknown: <CSC0003> failed to probe on isa0
unknown: <IBM3760> can't assign resources (port)
unknown: <IBM3760> at port 0x2f8-0x2ff,0x130-0x13f on isa0
unknown: <IBM0071> can't assign resources (port)
unknown: <IBM0071> at port 0x3f8-0x3ff on isa0
unknown: <PNP0e03> can't assign resources (port)
unknown: <PNP0e03> at port 0-0x1 on isa0
unknown: <PNP0680> can't assign resources (port)
unknown: <PNP0680> at port 0x1f0-0x1f7 on isa0
unknown: <PNP0680> can't assign resources (port)
unknown: <PNP0680> at port 0x170-0x177 on isa0
Device configuration finished.
TSC timecounter disabled: APM enabled.
Timecounter "TSC" frequency 265264998 Hz quality -1000
Timecounters tick every 10.000 msec
lo0: bpf attached
pccard0: CIS version PCCARD 2.0 or 2.1
pccard0: CIS info: Linksys, EtherFast 10/100 Integrated PC Card (PCM100), Ver 1.0,
pccard0: Manufacturer code 0x149, product 0xc1ab
pccard0: function 0: network adapter, ccr addr 400 mask 1
pccard0: function 0, config table entry 16: I/O card; irq mask befc; iomask 5, iospace 0-1f; mwait_required io16 irqlevel
pccard0: function 0, config table entry 1: I/O card; irq mask befc; iomask a, iospace 300-31f; mwait_required io16 irqlevel
pccard0: function 0, config table entry 2: I/O card; irq mask befc; iomask a, iospace 320-33f; mwait_required io16 irqlevel
pccard0: function 0, config table entry 3: I/O card; irq mask befc; iomask a, iospace 340-35f; mwait_required io16 irqlevel
pccard0: function 0, config table entry 4: I/O card; irq mask befc; iomask a, iospace 380-39f; mwait_required io16 irqlevel
pccard0: function 0, config table entry 5: I/O card; irq mask befc; iomask a, iospace 200-21f; mwait_required io16 irqlevel
pccard0: function 0, config table entry 6: I/O card; irq mask befc; iomask a, iospace 220-23f; mwait_required io16 irqlevel
pccard0: function 0, config table entry 7: I/O card; irq mask befc; iomask a, iospace 240-25f; mwait_required io16 irqlevel
ed1: <Linksys EtherFast 10/100 Integrated PC Card (PCM100)> at port 0x100-0x11f irq 11 function 0 config 16 on pccard0
ed1: bpf attached
ed1: address 00:04:5a:9e:63:51, type Linksys (16 bit)
miibus0: <MII bus> on ed1
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x080017, model 0x0002, rev. 3
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: setting PIO4 on Intel PIIX4 chip
ata0-master: setting UDMA33 on Intel PIIX4 chip
ad0: <FUJITSU MHN2200AT/7256> ATA-5 disk at ata0-master
ad0: 19077MB (39070080 sectors), 38760 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
GEOM: new disk ad0
ata1-master: pio=0x0c wdma=0x22 udma=0xffffffff cable=40pin
ata1-master: setting PIO4 on Intel PIIX4 chip
acd0: <TOSHIBA CD-ROM XM-1702BC/1562> CDROM drive at ata1 as master
acd0: read 4134KB/s (4134KB/s), 128KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
[0] f:00 typ:7 s(CHS):0/1/1 e(CHS):1023/15/63 s:63 l:4188177
[1] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/15/63 s:4188240 l:34881840
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 2144346624 end 2144378879
GEOM: Configure ad0s2, start 2144378880 length 17859502080 end 20003880959
GEOM: Configure ad0s2a, start 0 length 268435456 end 268435455
GEOM: Configure ad0s2b, start 268435456 length 268435456 end 536870911
GEOM: Configure ad0s2c, start 0 length 17859502080 end 17859502079
GEOM: Configure ad0s2d, start 536870912 length 268435456 end 805306367
GEOM: Configure ad0s2e, start 805306368 length 17054195712 end 17859502079
Mounting root from ufs:/dev/ad0s2a
WARNING: / was not properly dismounted
start_init: trying /sbin/init
More information about the freebsd-current
mailing list