System still hangs with "ata1-master: TIMEOUT - SETFEATURES SET TRANSFER MODE"

[Peter Wullinger]

On Tue, Jan 27, 2004 at 04:17:27PM +0200, Panagiotis Astithas wrote:
> Lefteris Chatzibarbas wrote:
> -- snip ---
>
> "Me too".
> Same controller, same hard disk, only one device on the second channel:
> acd0: DVDROM <DVD-ROM DDU1621> at ata1-master UDMA33
> I used 5.2-RELEASE and the -current snapshot form 24/1. The former 
> freezes after the "TIMEOUT" message, the latter just locks up solid. The 
> machine runs happily a -current from last October though.

Make that three ... on a different controller, though:

atapci1: <CMD 649 UDMA100 controller> port \
	0x8800-0x880f,0x9000-0x9003,0x9400-0x9407,0x9800-0x9803,0xa000-0xa007 \
	irq 10 at device 11.0 on pci0
cd1 at ata2 bus 0 target 0 lun 0
cd1: <PHILIPS CDRW48P P1.6> Removable CD-ROM SCSI-0 device 
cd1: 16.000MB/s transfers

FreeBSD 5.2 freezes with the IDE activity LED for the
controller continously glowing.

-CURRENT from January 24th has the same problem.

5.1-RELEASE-p11 from last Christmas runs smoothly
without complaints.

An ideas or should I just dump that thing to were it belongs?

Thanks,
	Peter