pcib0: device has no interrupts

[John Baldwin]

On Friday 16 January 2004 04:57 pm, Russell Jackson wrote:
> On Fri, Jan 16, 2004 at 02:50:47PM -0500, John Baldwin wrote:
> > On Thursday 15 January 2004 04:34 pm, Russell Jackson wrote:
> > > Syncing sources after 5.2 Release, the pccard device has stopped
> > > working. I believe this to be a problem with the new acpi code not
> > > giving it an interrupt. It was working properly prior to 5.2 Release.
> > >
> > > --
> > > Russell A. Jackson (rjackson at cserv62.csub.edu)
> >
> > Yes, your BIOS does not list what IRQ to use for your cardbus bridge.  I
> > noticed that you are using a custom DSDT.  Does it work ok if you don't
> > use a custom DSDT but use the one from the BIOS?
> >
> > --
> > John Baldwin <jhb at FreeBSD.org>  <><  http://www.FreeBSD.org/~jhb/
> > "Power Users Use the Power to Serve"  =  http://www.FreeBSD.org
>
> I've tried booting it both with and without my modified dsdt. It's only
> modified so that it will compile cleanly with the intel compiler. In either
> case, the outcome is the same.
>
> What changed in the ACPI code since 5.2RC?

Not a whole lot.  Do you have an ACPI dump handy so I can look at the _PRT for 
your pci0?

-- 
John Baldwin <jhb at FreeBSD.org>  <><  http://www.FreeBSD.org/~jhb/
"Power Users Use the Power to Serve"  =  http://www.FreeBSD.org