5.2-CURRENT panic on startup after cvsup: probably recent ATA

[sos at deepcore.dk]

It seems Jeffrey Katcher wrote:
> ata1: reiniting channel ..
> ata1: reset tp1 mask=03 ostat0=00 ostat1=00
> ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
> ata1-slave: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
> ata1: reset tp2 mask=03 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
> ata1: resetting done ..
> ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
> ata1-master: setting PIO4 on Intel ICH4 chip
> ata1-master: setting PIO4 on Intel ICH4 chip
> ata1: device config done ..
> 
> Fatal trap 12: page fault while in kernel mode
> 
> Is that any help?

And what do youhave on ata1 ? one ATAPI device as master ?

This will break lots-a-stuff if so, the HW show's that there are two
perfectly responding devices :(

-Søren
                     Yes I know it works under windows!!