PC Card Ethernet attach fails in -CURRENT (FA410TX on ThinkPad 240X)

[Mark Valentine]

> From: "M. Warner Losh" <imp at bsdimp.com>
> Date: Mon 20 Oct, 2003
> Subject: Re: PC Card Ethernet attach fails in -CURRENT (FA410TX on ThinkPad 240X)

> In message: <200310210021.h9L0LZBk032955 at dotar.thuvia.org>
>             Mark Valentine <mark at valentine.me.uk> writes:
> :  ed1: <NETGEAR FA410TX> at port 0x100-0x11f irq 11 function 0 config 32 on pccard0
> : -ed1: bpf attached
> : -ed1: address 00:48:54:c0:99:7b, type Linksys (16 bit) 
> : -miibus0: <MII bus> on ed1
> : -ukphy0: <Generic IEEE 802.3u media interface> on miibus0
> : -ukphy0: OUI 0x080017, model 0x0002, rev. 0
> : -ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> : +device_probe_and_attach: ed1 attach returned 6
> : 
> : The card had also been working happily with various 4.x releases.
> : 
> : Any ideas?
> 
> it worked for me sometime before 5.1, but I had two people at bsdcon
> trip me about this.  something weird has happened to the if_ed driver
> to screw this up.  I'm not sure what it is :-(

I just tested with the 5.2-RC2 floppies and this is still a problem.

Any further ideas since October on what the problem might be?  The 5.1
release does work with this card (so long as I cold boot after running
another OS).

[I've copied re@ on this, edit followup recipients as appropriate.]

		Cheers,

		Mark.

-- 
"Tigers will do ANYTHING for a tuna fish sandwich."
"We're kind of stupid that way."   *munch* *munch*
  -- <http://www.calvinandhobbes.com>