HP D325 Panic Fault Trap
Chris Stone
Chrisst141 at Comcast.net
Wed Dec 8 20:20:41 PST 2004
I have a new HP D325 minitower with an Athlon XP 3000+ processor, 512
RAM, 40GB 7200 HD, CD-RW/DVD-Rom.
If I try to boot a 5.2.1 based CD (Official Install or FreeSBIE) I get
this message:
FreeBSD/i386 Bootstrap loader, Revision 1.1
(root at nathan, Mon Feb 23 15:05:46 CET 2004)
|
int=0000000d err=00000000 efl=00030246 eip=0000249a
eax=00002025 ebx=00000004 ecx=00002000 edx=0000a654
esi=000008d5 edi=0006290c ebp=00001516 esp=000014e0
cs=f000 ds=ede1 es=ede1 fs=0000 gs=0000 ss=ede1
cs:eip=0f 20 dd 81 e5 00 f0 0f-20 c2 0f 01 e0 a8 01 75
08 80 c2 fe e8 53 ff eb-21 0f 20 e0 a9 30 00 75
ss:esp=0c 29 06 00 d5 08 c0 00-16 15 00 00 00 15 00 00
04 00 00 00 54 a6 00 00-04 00 00 00 25 a6 00 00
BTX Halted
If I use the 5.3 floppy I get get into the sysinstall by disabling ACPI.
Once I have it installed and it tries to boot off the HD I get the same
as above.
If I do not disable ACPI when booting from the floppies the kernel
starts and I get this:
CPU: AMD Athlon XP 3000+ (remaining spec omitted)
real memory = 469762048 (448 MB)
avail memory = 445825024 (425 MB)
Kernel trap 12 with interrupts disabled
Fatal trap 12: page fault while in kernel mode
Fault virtual address = 0x1c
Fault code = Supervisor write, page not present
Instruction pointer = 0x8:0xc075a5b0
Stack pointer = 0x10:0xc1021be0
Frame pointer = 0x10:0xc1021cac
Code segment = base 0x0, Limit 0xfffff, Type 0x1b
DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
Current process = 0 ()
Trap number = 12
Panic: page fault
Uptime: 1s
At that point it is totally frozen, no Ctrl+Alt+Del, no scrolling up or
down, no nothing.
Any ideas, hints, patches, bios settings; anything??
~Chris
More information about the freebsd-current
mailing list