6.0-CURRENT and ATAPI_IDENTIFY timed out and VIA MVP3
Roger Olofsson
raggen at passagen.se
Wed Dec 1 11:28:57 PST 2004
Greetings from Sweden,
I've been trying to find more information about the fact that one ata
channel has stopped working after I upgraded from 5.2.1-p9 to 6.0 #0.
The error comes when booting and looks like this:
Dec 1 19:53:25 scomber kernel: ata1-slave: FAILURE - ATAPI_IDENTIFY timed out
Dec 1 19:53:30 scomber kernel: ata1-slave: FAILURE - ATAPI_IDENTIFY timed out
Dec 1 19:53:35 scomber kernel: ata1-master: FAILURE - ATA_IDENTIFY timed out
Dec 1 19:53:40 scomber kernel: ata1-master: FAILURE - ATA_IDENTIFY timed out
Needless to say both devices attached to ata1 (cdrom and HD) were found and
working fine in 5.2.1-p9.
I've tried replacing the cdrom and HD with others and combinations of them
but all give same result.
Bios finds cdrom and HD fine.
When I run atacontrol list I get the following:
scomber# atacontrol list
ATA channel 0:
Master: ad0 <FUJITSU MPB3064ATU E/4010> ATA/ATAPI revision 3
Slave: ad1 <ST36422A/3.05> ATA/ATAPI revision 4
ATA channel 1:
Master: no device present
Slave: no device present
And atacontrol reinit 1 gives:
scomber# atacontrol reinit 1
Master: no device present
Slave: no device present
My motherboard is an old Shuttle HOT-591p and has VIA MVP3 chipset for 2
ultra33 dma ide.
I would be very grateful for any kinds of leads on solving this problem. It
feels terrible to have a 'crippled' FreeBSD.
Please answer to my email raggen at passagen.se.
More information about the freebsd-current
mailing list