fdc lost with a recent -Current
Thierry Herbelot
thierry at herbelot.com
Sat Aug 21 12:30:40 PDT 2004
Hello,
I seem to have lost the fdc0 device with the latest -Current.
the machine is a straight Abit BP6, with 2 oldish celerons (SMP, but ACPI
disabled)
the verbose dmesg is enclosed.
TfH
-------------- next part --------------
pcibios: PCI BIOS entry at 0xf0000+0xb5c0
pnpbios: Found PnP BIOS data at 0xc00fc1e0
pnpbios: Entry = f0000:c208 Rev = 1.0
Other BIOS signatures found:
ioapic0: Assuming intbase of 0
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
ioapic0: intpin 1 bus ISA
ioapic0: intpin 1 trigger: edge
ioapic0: intpin 1 polarity: high
ioapic0: intpin 2 bus ISA
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
ioapic0: intpin 3 bus ISA
ioapic0: intpin 3 trigger: edge
ioapic0: intpin 3 polarity: high
ioapic0: intpin 4 bus ISA
ioapic0: intpin 4 trigger: edge
ioapic0: intpin 4 polarity: high
ioapic0: intpin 5 bus ISA
ioapic0: intpin 5 trigger: edge
ioapic0: intpin 5 polarity: high
ioapic0: intpin 6 bus ISA
ioapic0: intpin 6 trigger: edge
ioapic0: intpin 6 polarity: high
ioapic0: intpin 7 bus ISA
ioapic0: intpin 7 trigger: edge
ioapic0: intpin 7 polarity: high
ioapic0: intpin 8 bus ISA
ioapic0: intpin 8 trigger: edge
ioapic0: intpin 8 polarity: high
ioapic0: intpin 9 bus ISA
ioapic0: intpin 9 trigger: edge
ioapic0: intpin 9 polarity: high
ioapic0: intpin 13 bus ISA
ioapic0: intpin 13 trigger: edge
ioapic0: intpin 13 polarity: high
ioapic0: intpin 14 bus ISA
ioapic0: intpin 14 trigger: edge
ioapic0: intpin 14 polarity: high
ioapic0: intpin 15 bus ISA
ioapic0: intpin 15 trigger: edge
ioapic0: intpin 15 polarity: high
ioapic0: intpin 19 bus PCI
ioapic0: intpin 19 trigger: level
ioapic0: intpin 19 polarity: low
ioapic0: intpin 19 bus PCI
ioapic0: intpin 19 trigger: level
ioapic0: intpin 19 polarity: low
ioapic0: intpin 18 bus PCI
ioapic0: intpin 18 trigger: level
ioapic0: intpin 18 polarity: low
ioapic0: intpin 17 bus PCI
ioapic0: intpin 17 trigger: level
ioapic0: intpin 17 polarity: low
ioapic0: intpin 19 bus PCI
ioapic0: intpin 19 trigger: level
ioapic0: intpin 19 polarity: low
ioapic0: intpin 18 bus PCI
ioapic0: intpin 18 trigger: level
ioapic0: intpin 18 polarity: low
ioapic0: intpin 18 bus PCI
ioapic0: intpin 18 trigger: level
ioapic0: intpin 18 polarity: low
ioapic0: intpin 16 bus PCI
ioapic0: intpin 16 trigger: level
ioapic0: intpin 16 polarity: low
ioapic0: Routing SMI -> intpin 23
lapic: Routing ExtINT -> LINT0
lapic: Routing NMI -> LINT1
ioapic0 <Version 1.1> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00040011 LDR: 0x01000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
io: <I/O>
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086)
pcibios: BIOS version 2.10
Found $PIR table, 8 entries at 0xc00fd7e0
PCI-Only Interrupts: 10 11 12
Location Bus Device Pin Link IRQs
slot 1 0 15 A 0x60 3 4 5 7 9 10 11 12 14 15
slot 1 0 15 B 0x61 3 4 5 7 9 10 11 12 14 15
slot 1 0 15 C 0x62 3 4 5 7 9 10 11 12 14 15
slot 1 0 15 D 0x63 3 4 5 7 9 10 11 12 14 15
slot 2 0 13 A 0x61 3 4 5 7 9 10 11 12 14 15
slot 2 0 13 B 0x62 3 4 5 7 9 10 11 12 14 15
slot 2 0 13 C 0x63 3 4 5 7 9 10 11 12 14 15
slot 2 0 13 D 0x60 3 4 5 7 9 10 11 12 14 15
slot 3 0 19 A 0x62 3 4 5 7 9 10 11 12 14 15
slot 3 0 19 B 0x62 3 4 5 7 9 10 11 12 14 15
slot 3 0 19 C 0x60 3 4 5 7 9 10 11 12 14 15
slot 3 0 19 D 0x61 3 4 5 7 9 10 11 12 14 15
slot 4 0 9 A 0x63 3 4 5 7 9 10 11 12 14 15
slot 4 0 9 B 0x60 3 4 5 7 9 10 11 12 14 15
slot 4 0 9 C 0x61 3 4 5 7 9 10 11 12 14 15
slot 4 0 9 D 0x62 3 4 5 7 9 10 11 12 14 15
slot 5 0 17 A 0x63 3 4 5 7 9 10 11 12 14 15
slot 5 0 17 B 0x60 3 4 5 7 9 10 11 12 14 15
slot 5 0 17 C 0x61 3 4 5 7 9 10 11 12 14 15
slot 5 0 17 D 0x62 3 4 5 7 9 10 11 12 14 15
slot 6 0 11 A 0x62 3 4 5 7 9 10 11 12 14 15
slot 6 0 11 B 0x63 3 4 5 7 9 10 11 12 14 15
slot 6 0 11 C 0x60 3 4 5 7 9 10 11 12 14 15
slot 6 0 11 D 0x61 3 4 5 7 9 10 11 12 14 15
embedded 0 7 A 0x60 3 4 5 7 9 10 11 12 14 15
embedded 0 7 B 0x61 3 4 5 7 9 10 11 12 14 15
embedded 0 7 C 0x62 3 4 5 7 9 10 11 12 14 15
embedded 0 7 D 0x63 3 4 5 7 9 10 11 12 14 15
embedded 0 1 A 0x60 3 4 5 7 9 10 11 12 14 15
embedded 0 1 B 0x61 3 4 5 7 9 10 11 12 14 15
embedded 0 1 C 0x62 3 4 5 7 9 10 11 12 14 15
embedded 0 1 D 0x63 3 4 5 7 9 10 11 12 14 15
pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base d0000000, size 26, enabled
found-> vendor=0x8086, dev=0x7190, revid=0x03
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2210, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7191, revid=0x03
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x88 (34000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7110, revid=0x02
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000f000, size 4, enabled
found-> vendor=0x8086, dev=0x7111, revid=0x01
bus=0, slot=7, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000c000, size 5, enabled
pcib0: slot 7 INTD routed to irq 19
found-> vendor=0x8086, dev=0x7112, revid=0x01
bus=0, slot=7, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=19
map[90]: type 4, range 32, base 00005000, size 4, enabled
found-> vendor=0x8086, dev=0x7113, revid=0x02
bus=0, slot=7, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 4, range 32, base 0000c400, size 8, enabled
map[14]: type 1, range 32, base d9000000, size 8, enabled
pcib0: slot 9 INTA routed to irq 19
found-> vendor=0x10ec, dev=0x8139, revid=0x10
bus=0, slot=9, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns)
intpin=a, irq=19
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000c800, size 6, enabled
pcib0: slot 11 INTA routed to irq 18
found-> vendor=0x1274, dev=0x5000, revid=0x00
bus=0, slot=11, func=0
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0105, statreg=0x0400, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x0c (3000 ns), maxlat=0x80 (32000 ns)
intpin=a, irq=18
pci0:13:0: Transition from D3 to D0
map[10]: type 4, range 32, base 0000cc00, size 6, enabled
pcib0: slot 13 INTA routed to irq 17
found-> vendor=0x1274, dev=0x1371, revid=0x08
bus=0, slot=13, func=0
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0410, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x0c (3000 ns), maxlat=0x80 (32000 ns)
intpin=a, irq=17
powerspec 1 supports D0 D2 D3 current D0
map[10]: type 4, range 32, base 0000d000, size 5, enabled
pcib0: slot 17 INTA routed to irq 19
found-> vendor=0x134a, dev=0x0001, revid=0x00
bus=0, slot=17, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=19
map[10]: type 4, range 32, base 0000d400, size 3, enabled
map[14]: type 4, range 32, base 0000d800, size 2, enabled
map[20]: type 4, range 32, base 0000dc00, size 8, enabled
pcib0: slot 19 INTA routed to irq 18
found-> vendor=0x1103, dev=0x0004, revid=0x01
bus=0, slot=19, func=0
class=01-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0200, cachelnsz=8 (dwords)
lattimer=0xf8 (7440 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns)
intpin=a, irq=18
map[10]: type 4, range 32, base 0000e000, size 3, enabled
map[14]: type 4, range 32, base 0000e400, size 2, enabled
map[20]: type 4, range 32, base 0000e800, size 8, enabled
pcib0: slot 19 INTB routed to irq 18
found-> vendor=0x1103, dev=0x0004, revid=0x01
bus=0, slot=19, func=1
class=01-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0200, cachelnsz=8 (dwords)
lattimer=0xf8 (7440 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns)
intpin=b, irq=18
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xd0000000-0xd3ffffff at device 0.0 on pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xd0000000
agp0: allocating GATT for aperture of size 64M
pcib1: <MPTable PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xd4000000-0xd5ffffff
pcib1: prefetched decode 0xd6000000-0xd7ffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 1, range 32, base d4000000, size 24, enabled
pcib1: device (null) requested decoded memory range 0xd4000000-0xd4ffffff
map[14]: type 3, range 32, base d6000000, size 25, enabled
pcib1: device (null) requested decoded memory range 0xd6000000-0xd7ffffff
pcib1: slot 0 INTA routed to irq 16
found-> vendor=0x10de, dev=0x002d, revid=0x11
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
intpin=a, irq=16
powerspec 1 supports D0 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf000
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=01 ostat0=00 ostat1=ff
ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: [MPSAFE]
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xc000-0xc01f irq 19 at device 7.2 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xc000
uhci0: [GIANT-LOCKED]
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
piix0: <PIIX Timecounter> port 0x5000-0x500f at device 7.3 on pci0
Timecounter "PIIX" frequency 3579545 Hz quality 0
re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xc400
rl0: <RealTek 8139 10/100BaseTX> port 0xc400-0xc4ff mem 0xd9000000-0xd90000ff irq 19 at device 9.0 on pci0
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: bpf attached
rl0: Ethernet address: 00:40:95:30:38:36
rl0: [GIANT-LOCKED]
pcm0: <AudioPCI ES1370> port 0xc800-0xc83f irq 18 at device 11.0 on pci0
pcm0: Reserved 0x40 bytes for rid 0x10 type 4 at 0xc800
pcm0: [GIANT-LOCKED]
pcm0: sndbuf_setmap 7b6c000, 1000; 0xc1398000 -> 7b6c000
pcm0: sndbuf_setmap 7b8a000, 1000; 0xc1396000 -> 7b8a000
pcm1: <AudioPCI ES1373-8> port 0xcc00-0xcc3f irq 17 at device 13.0 on pci0
pcm1: Reserved 0x40 bytes for rid 0x10 type 4 at 0xcc00
pcm1: <Cirrus Logic CS4297A AC97 Codec (id = 0x43525913)>
pcm1: Codec features headphone, 20 bit DAC, 18 bit ADC, 6 bit master volume, Crystal Semi 3D Stereo Enhancement
pcm1: Primary codec extended features AMAP
pcm1: [GIANT-LOCKED]
pcm1: sndbuf_setmap 7bc8000, 1000; 0xc1394000 -> 7bc8000
pcm1: sndbuf_setmap 7aa5000, 1000; 0xc1391000 -> 7aa5000
pci0: <mass storage, SCSI> at device 17.0 (no driver attached)
atapci1: <HighPoint HPT366 UDMA66 controller> port 0xdc00-0xdcff,0xd800-0xd803,0xd400-0xd407 irq 18 at device 19.0 on pci0
atapci1: Reserved 0x100 bytes for rid 0x20 type 4 at 0xdc00
atapci1: [MPSAFE]
ata2: channel #0 on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xd400
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xd800
ata2: reset tp1 mask=03 ostat0=50 ostat1=30
ata2-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata2-slave: stat=0x30 err=0x30 lsb=0x30 msb=0x30
ata2: reset tp2 stat0=50 stat1=30 devices=0x1<ATA_MASTER>
ata2: [MPSAFE]
atapci2: <HighPoint HPT366 UDMA66 controller> port 0xe800-0xe8ff,0xe400-0xe403,0xe000-0xe007 irq 18 at device 19.1 on pci0
atapci2: Reserved 0x100 bytes for rid 0x20 type 4 at 0xe800
atapci2: [MPSAFE]
ata3: channel #0 on atapci2
atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0xe000
atapci2: Reserved 0x4 bytes for rid 0x14 type 4 at 0xe400
ata3: reset tp1 mask=03 ostat0=50 ostat1=30
ata3-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata3-slave: stat=0x30 err=0x30 lsb=0x30 msb=0x30
ata3: reset tp2 stat0=50 stat1=30 devices=0x1<ATA_MASTER>
ata3: [MPSAFE]
cpu0 on motherboard
cpu1 on motherboard
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
YMH0021: start dependent (0)
YMH0021: adding io range 0x220-0x22f, size=0x10, align=0x10
YMH0021: adding io range 0x530-0x537, size=0x8, align=0x8
YMH0021: adding io range 0x388-0x38b, size=0x4, align=0x4
YMH0021: adding io range 0x330-0x331, size=0x2, align=0x2
YMH0021: adding io range 0x370-0x371, size=0x2, align=0x2
YMH0021: adding irq mask 0x20
YMH0021: adding dma mask 0x1
YMH0021: adding dma mask 0x2
YMH0021: start dependent (1)
YMH0021: adding io range 0x240-0x24f, size=0x10, align=0x10
YMH0021: adding io range 0xe80-0xe87, size=0x8, align=0x8
YMH0021: adding io range 0x388-0x38b, size=0x4, align=0x8
YMH0021: adding io range 0x300-0x301, size=0x2, align=0x2
YMH0021: adding io range 0x100-0xfff, size=0x2, align=0x2
YMH0021: adding irq mask 0xea0
YMH0021: adding dma mask 0xb
YMH0021: adding dma mask 0xb
YMH0021: start dependent (2)
YMH0021: adding io range 0x220-0x28f, size=0x10, align=0x10
YMH0021: adding io range 0x530-0xf4f, size=0x8, align=0x8
YMH0021: adding io range 0x388-0x3fb, size=0x4, align=0x8
YMH0021: adding io range 0x300-0x335, size=0x2, align=0x2
YMH0021: adding io range 0x100-0xfff, size=0x2, align=0x2
YMH0021: adding irq mask 0xea8
YMH0021: adding dma mask 0xb
YMH0021: adding dma mask 0xb
YMH0021: end dependent
YMH0022: start dependent (0)
YMH0022: adding io range 0x201-0x201, size=0x1, align=0x1
YMH0022: start dependent (1)
YMH0022: adding io range 0x202-0x202, size=0x1, align=0x1
YMH0022: start dependent (1)
YMH0022: adding io range 0x203-0x203, size=0x1, align=0x1
YMH0022: start dependent (2)
YMH0022: adding io range 0x204-0x20f, size=0x1, align=0x1
YMH0022: end dependent
ex_isa_identify()
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ahc_isa_probe 12: ioport 0xcc00 alloc failed
ahc_isa_probe 13: ioport 0xdc00 alloc failed
pnpbios: 15 devices, largest 78 bytes
PNP0200: adding dma mask 0x10
PNP0200: adding io range 0-0xf, size=0x10, align=0
PNP0200: adding io range 0x81-0x83, size=0x3, align=0
PNP0200: adding io range 0x87-0x87, size=0x1, align=0
PNP0200: adding io range 0x89-0x8b, size=0x3, align=0
PNP0200: adding io range 0x8f-0x91, size=0x3, align=0
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0
pnpbios: handle 1 device ID PNP0200 (0002d041)
PNP0100: adding irq mask 0x1
PNP0100: adding io range 0x40-0x43, size=0x4, align=0
pnpbios: handle 2 device ID PNP0100 (0001d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0
pnpbios: handle 3 device ID PNP0b00 (000bd041)
PNP0303: adding irq mask 0x2
PNP0303: adding io range 0x60-0x60, size=0x1, align=0
PNP0303: adding io range 0x64-0x64, size=0x1, align=0
pnpbios: handle 4 device ID PNP0303 (0303d041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0
pnpbios: handle 5 device ID PNP0800 (0008d041)
PNP0c04: adding irq mask 0x2000
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0
pnpbios: handle 6 device ID PNP0c04 (040cd041)
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0xfffe0000-0xffffffff, size=0x20000
PNP0c01: adding fixed memory32 range 0xfec00000-0xfec0ffff, size=0x10000
PNP0c01: adding fixed memory32 range 0xfee00000-0xfee0ffff, size=0x10000
PNP0c01: adding fixed memory32 range 0x100000-0x7ffffff, size=0x7f00000
pnpbios: handle 7 device ID PNP0c01 (010cd041)
PNP0c02: adding fixed memory32 range 0xe0000-0xeffff, size=0x10000
PNP0c02: adding fixed memory32 range 0xf0000-0xf3fff, size=0x4000
PNP0c02: adding fixed memory32 range 0xf4000-0xf7fff, size=0x4000
PNP0c02: adding fixed memory32 range 0xf8000-0xfffff, size=0x8000
PNP0c02: adding fixed memory32 range 0xd1800-0xd3fff, size=0x2800
pnpbios: handle 8 device ID PNP0c02 (020cd041)
PNP0a03: adding io range 0x294-0x297, size=0x4, align=0
PNP0a03: adding io range 0x4d0-0x4d1, size=0x2, align=0
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0
PNP0a03: adding io range 0x480-0x48f, size=0x10, align=0
PNP0a03: adding io range 0x4000-0x403f, size=0x40, align=0
PNP0a03: adding io range 0x5000-0x501f, size=0x20, align=0
pnpbios: handle 9 device ID PNP0a03 (030ad041)
PNP0c02: adding io range 0x208-0x20f, size=0x8, align=0
pnpbios: handle 11 device ID PNP0c02 (020cd041)
PNP0501: adding irq mask 0x10
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0
pnpbios: handle 12 device ID PNP0501 (0105d041)
PNP0700: adding dma mask 0x4
PNP0700: adding io range 0x3f2-0x3f5, size=0x4, align=0
PNP0700: adding irq mask 0x40
pnpbios: handle 13 device ID PNP0700 (0007d041)
PNP0400: adding irq mask 0x80
PNP0400: adding io range 0x378-0x37f, size=0x8, align=0
pnpbios: handle 14 device ID PNP0400 (0004d041)
PNP0501: adding irq mask 0x8
PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0
pnpbios: handle 16 device ID PNP0501 (0105d041)
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xef000-0xeffff,0xd0000-0xd17ff,0xc0000-0xcffff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
kbd0: atkbd0, generic (0), config:0x0, flags:0x1f0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0067
psm0: failed to reset the aux device.
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
ic_type 90 part_id 80
fdc0: <Enhanced floppy controller> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
device_attach: fdc0 attach returned 2
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0xe241 0xe251 0xe241 0xe241
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1: irq maps: 0xe241 0xe249 0xe241 0xe240
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
adv1: Invalid baseport of 0x220 specified. Nearest valid baseport is 0x230. Failing probe.
pcm2: <Yamaha OPL-SAx> at port 0x370-0x371,0x330-0x331,0x388-0x38b,0x530-0x537,0x220-0x22f irq 5 drq 1,0 on isa0
Yamaha: ver 0x21 DMA config 0x84
pcm2: [GIANT-LOCKED]
pcm2: sndbuf_setmap ffc000, 1000; 0xcc173000 -> ffc000
pcm2: sndbuf_setmap ffb000, 1000; 0xcc174000 -> ffb000
adv1: Invalid baseport of 0x201 specified. Nearest valid baseport is 0x210. Failing probe.
joy0: <Generic PnP Joystick> at port 0x201 on isa0
adv1: Invalid baseport of 0x0 specified. Nearest valid baseport is 0x100. Failing probe.
adv1: Invalid baseport of 0x40 specified. Nearest valid baseport is 0x100. Failing probe.
adv1: Invalid baseport of 0x70 specified. Nearest valid baseport is 0x100. Failing probe.
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 on isa0
adv1: Invalid baseport of 0x61 specified. Nearest valid baseport is 0x100. Failing probe.
unknown: <PNP0800> failed to probe at port 0x61 on isa0
adv1: Invalid baseport of 0xf0 specified. Nearest valid baseport is 0x100. Failing probe.
ahc0: No resources alloated.
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0c02> at iomem 0xe0000-0xeffff on isa0
unknown: <PNP0a03> can't assign resources (port)
unknown: <PNP0a03> at port 0x4d0-0x4d1,0x294-0x297 on isa0
adv1: Invalid baseport of 0x208 specified. Nearest valid baseport is 0x210. Failing probe.
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
adv1: Invalid baseport of 0x3f2 specified. Nearest valid baseport is 0x330. Failing probe.
fdc1: cannot reserve I/O port range (6 ports)
unknown: <PC standard floppy disk controller> failed to probe at port 0x3f2-0x3f5 irq 6 drq 2 on isa0
unknown: <PNP0400> can't assign resources (port)
unknown: <PNP0400> at port 0x378-0x37f on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x2f8-0x2ff on isa0
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 334092129 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attached
ata0-master: pio=0x0c wdma=0x22 udma=0x44 cable=80pin
ata0-master: setting PIO4 on Intel PIIX4 chip
ata0-master: setting UDMA33 on Intel PIIX4 chip
ad0: <Maxtor 91826U4/FA550480> ATA-5 disk at ata0-master
ad0: 17418MB (35673120 sectors), 35390 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
GEOM: new disk ad0
ar: FreeBSD check1 failed
ata1-master: pio=0x0c wdma=0x22 udma=0xffffffff cable=40pin
ATAPI_RESET time = 50us
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/15/63 s:63 l:10239201
[1] f:00 typ:165 s(CHS):1023/255/63 e(CHS):1023/15/63 s:10239264 l:10239264
[2] f:00 typ:165 s(CHS):1023/255/63 e(CHS):1023/15/63 s:20478528 l:15194592
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 5242470912 end 5242503167
GEOM: Configure ad0s2, start 5242503168 length 5242503168 end 10485006335
GEOM: Configure ad0s3, start 10485006336 length 7779631104 end 18264637439
ata1-master: setting PIO4 on Intel PIIX4 chip
GEOM: Configure ad0s1a, start 0 length 209715200 end 209715199
GEOM: Configure ad0s1b, start 209715200 length 560988160 end 770703359
GEOM: Configure ad0s1c, start 0 length 5242470912 end 5242470911
GEOM: Configure ad0s1d, start 770703360 length 209715200 end 980418559
GEOM: Configure ad0s1e, start 980418560 length 209715200 end 1190133759
GEOM: Configure ad0s1f, start 1190133760 length 4052337152 end 5242470911
acd0: <NEC CD-ROM DRIVE:28B/3.05> CDROM drive at ata1 as master
acd0: read 2412KB/s (5512KB/s), 256KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
GEOM: Configure ad0s2a, start 0 length 209715200 end 209715199
GEOM: Configure ad0s2b, start 209715200 length 560988160 end 770703359
GEOM: Configure ad0s2c, start 0 length 5242503168 end 5242503167
GEOM: Configure ad0s2d, start 770703360 length 209715200 end 980418559
GEOM: Configure ad0s2e, start 980418560 length 209715200 end 1190133759
GEOM: Configure ad0s2f, start 1190133760 length 4052369408 end 5242503167
ata2-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
GEOM: Configure ad0s3c, start 0 length 7779631104 end 7779631103
GEOM: Configure ad0s3e, start 0 length 7779631104 end 7779631103
ata2-master: setting PIO4 on HighPoint chip
ata2-master: setting UDMA33 on HighPoint chip
ad4: <IBM-DTTA-351010/T56OA73A> ATA-4 disk at ata2-master
ad4: 9671MB (19807200 sectors), 19650 C, 16 H, 63 S, 512 B
ad4: 16 secs/int, 1 depth queue, UDMA33
ar: HighPoint check1 failed
ata3-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata3-master: setting PIO4 on HighPoint chip
ata3-master: setting UDMA33 on HighPoint chip
ad6: <IBM-DTTA-351010/T56OA73A> ATA-4 disk at ata3-master
ad6: 9671MB (19807200 sectors), 19650 C, 16 H, 63 S, 512 B
ad6: 16 secs/int, 1 depth queue, UDMA33
ar: HighPoint check1 failed
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x00040011 LDR: 0x02000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0
ioapic0: routing intpin 3 (ISA IRQ 3) to cluster 0
ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0
ioapic0: routing intpin 5 (ISA IRQ 5) to cluster 0
ioapic0: routing intpin 7 (ISA IRQ 7) to cluster 0
ioapic0: routing intpin 8 (ISA IRQ 8) to cluster 0
ioapic0: routing intpin 13 (ISA IRQ 13) to cluster 0
ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0
ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0
ioapic0: routing intpin 17 (PCI IRQ 17) to cluster 0
ioapic0: routing intpin 18 (PCI IRQ 18) to cluster 0
ioapic0: routing intpin 19 (PCI IRQ 19) to cluster 0
GEOM: new disk ad4
GEOM: new disk ad6
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/15/63 s:63 l:19807137
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad4s1, start 32256 length 10141254144 end 10141286399
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/15/63 s:63 l:19807137
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad6s1, start 32256 length 10141254144 end 10141286399
GEOM: Configure ad4s1a, start 0 length 10141254144 end 10141254143
GEOM: Configure ad4s1c, start 0 length 10141254144 end 10141254143
GEOM: Configure ad6s1a, start 0 length 10141254144 end 10141254143
GEOM: Configure ad6s1c, start 0 length 10141254144 end 10141254143
Mounting root from ufs:/dev/ad0s1a
start_init: trying /sbin/init
More information about the freebsd-current
mailing list