cd0 errors during probe?

[Kenneth D. Merry]

On Sun, Oct 12, 2003 at 10:26:54 -0700, Steve Kargl wrote:
> Can I assume that the following error messages are
> erronous because cd0 appears to function without
> any problems?  There is a CD in the drive.
> 
> cd0 at ahc0 bus 0 target 4 lun 0
> cd0: <TOSHIBA CD-ROM XM-6401TA 1001> Removable CD-ROM SCSI-2 device 
> cd0: 10.000MB/s transfers (10.000MHz, offset 15)
> cd0: cd present [129875 x 2048 byte records]
> (cd0:ahc0:0:4:0): READ(10). CDB: 28 0 0 0 0 0 0 0 1 0 
> (cd0:ahc0:0:4:0): CAM Status: SCSI Status Error
> (cd0:ahc0:0:4:0): SCSI Status: Check Condition
> (cd0:ahc0:0:4:0): BLANK CHECK asc:64,0
> (cd0:ahc0:0:4:0): Illegal mode for this track
> (cd0:ahc0:0:4:0): Retrying Command (per Sense Data)
> (cd0:ahc0:0:4:0): READ(10). CDB: 28 0 0 0 0 0 0 0 1 0 
> (cd0:ahc0:0:4:0): CAM Status: SCSI Status Error
> (cd0:ahc0:0:4:0): SCSI Status: Check Condition
> (cd0:ahc0:0:4:0): BLANK CHECK asc:64,0
> (cd0:ahc0:0:4:0): Illegal mode for this track
> (cd0:ahc0:0:4:0): Retrying Command (per Sense Data)
> (cd0:ahc0:0:4:0): READ(10). CDB: 28 0 0 0 0 0 0 0 1 0 
> (cd0:ahc0:0:4:0): CAM Status: SCSI Status Error
> (cd0:ahc0:0:4:0): SCSI Status: Check Condition
> (cd0:ahc0:0:4:0): BLANK CHECK asc:64,0
> (cd0:ahc0:0:4:0): Illegal mode for this track
> (cd0:ahc0:0:4:0): Retrying Command (per Sense Data)

Looks like GEOM is trying to read the first sector of the CD, but since
it's likely an audio CD, it doesn't quite work.

Ken
-- 
Kenneth Merry
ken at kdm.org