SMBus / I2C h/w sensors and FreeBSD 5.1

[Dan Naumov]

On Sun, 2003-10-05 at 02:53, Bernd Walter wrote:
> With a driver for the hardware it's possible of course.
> You have a VT82C686A/B chip for which you want viapm driver.
> intpm is for Intel PIIX4 (82371AB, 82443MX) which you don't have.

I've replaced intpm with viapm in my kernel config and this is what I am
seeing in my dmesg now:

viapropm0: SMBus I/O base at 0x5000
viapropm0: <VIA VT82C686A Power Management Unit> port 0x5000-0x500f at
device 7.4 on pci0
viapropm0: failed to enable port mapping!
viapropm0: could not allocate bus space
device_probe_and_attach: viapropm0 attach returned 6

Obviously, /dev/smb is still nowhere to be seen :(

Sincerely,
Dan Naumov