FreeBSD 5.1-Release freezes
Socketd
db at traceroute.dk
Wed Jun 25 13:30:58 PDT 2003
On Wed, 25 Jun 2003 10:24:43 -0700
"Kevin Oberman" <oberman at es.net> wrote:
> Providing your complete configuration file and /var/run/dmesg.boot
> might give a bit of a clue.
Ok. /usr/src/sys/i386/conf/SOCKETD:
machine i386
cpu I586_CPU
ident SOCKETD
options SCHED_4BSD #4BSD scheduler
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options SOFTUPDATES #Enable FFS soft updates support
options UFS_ACL #Support for access control
lists
options UFS_DIRHASH #Improve performance on big
directories
options MD_ROOT #MD is a potential root device
options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
options PROCFS #Process filesystem (requires
PSEUDOFS)
options PSEUDOFS #Pseudo-filesystem framework
options COMPAT_43 #Compatible with BSD 4.3 [KEEP
THIS!]
options COMPAT_FREEBSD4 #Compatible with FreeBSD4
options SCSI_DELAY=15000 #Delay (in ms) before probing
SCSI
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time
extensionsoptions KBD_INSTALL_CDEV # install a CDEV entry
in /dev
options AHC_REG_PRETTY_PRINT # Print register bitfields in
debug
# output. Adds ~128k to driver.
options AHD_REG_PRETTY_PRINT # Print register bitfields in
debug
# output. Adds ~215k to driver.
options INVARIANT_SUPPORT #Extra sanity checks of internal
structures, required by INVARIANTS
device isa
device eisa
device pci
device fdc
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
device atapist # ATAPI tape drives
options ATA_STATIC_ID #Static device numbering
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse
device vga # VGA video card driver
device splash # Splash screen and screen saver support
device sc
device agp # support several AGP chipsets
device npx
device pmtimer
device cbb # cardbus (yenta) bridge
device pccard # PC Card (16-bit) bus
device cardbus # CardBus (32-bit) bus
device sio # 8250, 16[45]50 based serial ports
device ppc
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
device miibus # MII bus support
device random # Entropy device
device loop # Network loopback
device ether # Ethernet support
device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
device md # Memory "disks"
device bpf # Berkeley packet filter
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device usb # USB Bus (required)
device ugen # Generic
device uhid # "Human Interface Devices"
device ukbd # Keyboard
device ums # Mouse
device aue # ADMtek USB ethernet
device pcm
options SC_DISABLE_REBOOT
options MAC
And /var/run/dmesg.boot
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-RELEASE #1: Sat Jan 2 03:46:39 CET 1999
socketd at mini.trunet.dk:/usr/obj/usr/src/sys/SOCKETD
Preloaded elf kernel "/boot/kernel/kernel" at 0xc048f000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc048f1f4.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 448341906 Hz
CPU: AMD-K6(tm) 3D processor (448.34-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x58c Stepping = 12
Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
AMD Features=0x80000800<SYSCALL,3DNow!>
real memory = 62849024 (59 MB)
avail memory = 56098816 (53 MB)
K6-family MTRR support enabled (2 registers)
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD RSDT > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 5 entries at 0xc00fdf70
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-safe" frequency 3579545 Hz
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
acpi_tz0: <thermal zone> port 0x530-0x537 on acpi0
acpi_button0: <Power Button> on acpi0
acpi_acad0: <AC adapter> on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 8501 (Apollo MVP4) host to PCI bridge> mem
0xf8000000-0xfbffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.AGP_ -
AE_NOT_FOUND
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686A UDMA66 controller> port 0x1820-0x182f at device
7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0x1800-0x181f irq 11 at device
7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
aue0: USB USB 10/100 FastEthernet, rev 1.10/1.01, addr 2
aue0: Ethernet address: 00:50:fc:29:2b:1f
miibus0: <MII bus> on aue0
acphy0: <AC101 10/100 media interface> on miibus0
acphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab1: <PCI-ISA bridge> at device 7.4 on pci0
pcm0: <VIA VT82C686A> port 0x1830-0x1833,0x1834-0x1837,0x1000-0x10ff irq
11 at device 7.5 on pci0
pcm0: <Analog Devices AD1881 AC97 Codec>
pci0: <simple comms> at device 9.0 (no driver attached)
cbb0: <TI1211 PCI-CardBus Bridge> at device 10.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib0: possible interrupts: 9
pcib0: slot 10 INTA routed to irq 9 via \\_SB_.PCI0.PIB_.LNKB
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0
orm0: <Option ROMs> at iomem 0xdc000-0xdffff,0xc0000-0xcbfff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 16 steps (100% to 6.2%), currently 100.0%
system power profile changed to 'economy'
system power profile changed to 'performance'
ad0: 5729MB <TOSHIBA MK6014MAP> [12416/15/63] at ata0-master UDMA66
acd0: CDROM <TOSHIBA CD-ROM XM-7002B> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
> You do mention that you are using MAC. The MAC code is rather new and
> clearly labeled as experimental, so that might be a source of the
> problem. Can you try building a kernel without MAC?
Sure can! I just removed "options MAC", compiled and rebooted, now the
problem is gone, so it was a MAC problem. Now what?
br
socketd
ps: I'm not on the list, so please cc to me
More information about the freebsd-current
mailing list