ACPI problem?

Danny Braniss danny at cs.huji.ac.il
Tue Jul 15 07:33:01 PDT 2003


hi,
	the motherboard is Intel STL2, which works fine with 4.8-stable.
just tried 5.1-current and it hangs on boot:

BIOS drive A: is disk0
BIOS drive C: is disk1

PXE version 2.1, real mode entry point @9d3a:0106
BIOS 637kB/785344kB available memory

FreeBSD/i386 bootstrap loader, Revision 1.1
(danny at cs4, Tue Jul 15 17:13:47 IDT 2003)
pxe_open: server addr: 132.65.16.23
pxe_open: server path: /roots/FreeBSD/i386-5.1
pxe_open: gateway ip:  132.65.16.1
Loading /boot/defaults/loader.conf 
/boot/kernel/kernel text=0x42d0f4 data=0x78094+0x829e0 
syms=[0x4+0x56520+0x4+0x65c75]

Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...               
/boot/kernel/acpi.ko text=0x39c14 data=0x1638+0xf68 
syms=[0x4+0x5990+0x4+0x75d9]
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #2: Tue Jun 24 15:51:59 IDT 2003
    danny at cs4:/r+d/obj/r+d/src/sys/HUJI
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0730000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0730244.
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 933074142 Hz
CPU: Intel Pentium III (933.07-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x686  Stepping = 6
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C
MOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 805240832 (767 MB)
avail memory = 774459392 (738 MB)
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <INTEL  024B    > on motherboard
pcibios: BIOS version 2.10
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-safe"  frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x404-0x407 on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
acpi_tz0: _CRT value is absurd, ignored (-217.-7C)
acpi_tz0: _ACx value is absurd, ignored (-247.-7C)
acpi_tz1: <thermal zone> on acpi0
acpi_tz1: _CRT value is absurd, ignored (-217.-7C)
acpi_tz1: _ACx value is absurd, ignored (-247.-7C)
acpi_tz2: <thermal zone> on acpi0
acpi_tz2: _CRT value is absurd, ignored (-217.-7C)
acpi_tz2: _ACx value is absurd, ignored (-247.-7C)
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 2 INTA is routed to irq 11
pcib0: slot 3 INTA is routed to irq 9
pcib0: slot 6 INTA is routed to irq 5
pcib0: slot 15 INTA is routed to irq 9
pci0: <display, VGA> at device 2.0 (no driver attached)
fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0x1400-0x143f 
mem 0xf9100000-0xf91fffff,0xf9001000-0xf9001fff irq 9 at device 3.0 on pci0
fxp0: Ethernet address 00:d0:b7:b6:90:53
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.6.6> port 
0x1440-0x145f mem 0xf9020000-0xf903ffff,0xf9040000-0xf905ffff irq 5 at device 
6.0 on pci0
em0:  Speed:N/A  Duplex:N/A
isab0: <PCI-ISA bridge> port 0x580-0x58f at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 UDMA33 controller> port 
0x1460-0x146f,0x374-0x377,0x170-0x177 at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ohci0: <OHCI (generic) USB controller> mem 0xf9002000-0xf9002fff irq 9 at 
device 15.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pcib1: <ACPI Host-PCI bridge> on acpi0
pci1: <ACPI PCI bus> on pcib1
pcib1: slot 4 INTA is routed to irq 9
pcib1: slot 4 INTB is routed to irq 10
ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x1800-0x18ff mem 
0xfb000000-0xfb000fff irq 9 at device 4.0 on pci1
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x2000-0x20ff mem 
0xfb001000-0xfb001fff irq 10 at device 4.1 on pci1
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A, console
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
acpi_ec0: <embedded controller> port 0xca7,0xca6 on acpi0
    ACPI-0340: *** Error: Could not release ACPI Global Lock, AE_BAD_PARAMETER
    ACPI-0340: *** Error: Could not release ACPI Global Lock, AE_BAD_PARAMETER
    ACPI-0340: *** Error: Could not release ACPI Global Lock, AE_BAD_PARAMETER
    ACPI-0340: *** Error: Could not release ACPI Global Lock, AE_BAD_PARAMETER
    ACPI-0340: *** Error: Could not release ACPI Global Lock, AE_BAD_PARAMETER
    ACPI-0340: *** Error: Could not release ACPI Global Lock, AE_BAD_PARAMETER
    ACPI-0340: *** Error: Could not release ACPI Global Lock, AE_BAD_PARAMETER
    ACPI-0340: *** Error: Could not release ACPI Global Lock, AE_BAD_PARAMETER
    ACPI-0340: *** Error: Could not release ACPI Global Lock, AE_BAD_PARAMETER
    ACPI-0340: *** Error: Could not release ACPI Global Lock, AE_BAD_PARAMETER
    ACPI-0340: *** Error: Could not release ACPI Global Lock, AE_BAD_PARAMETER
    ACPI-0340: *** Error: Could not release ACPI Global Lock, AE_BAD_PARAMETER
    ACPI-0340: *** Error: Could not release ACPI Global Lock, AE_BAD_PARAMETER
    ACPI-0340: *** Error: Could not release ACPI Global Lock, AE_BAD_PARAMETER
    ACPI-0340: *** Error: Could not release ACPI Global Lock, AE_BAD_PARAMETER
    ACPI-0340: *** Error: Could not release ACPI Global Lock, AE_BAD_PARAMETER
    ACPI-0340: *** Error: Could not release ACPI Global Lock, AE_BAD_PARAMETER
    ACPI-0340: *** Error: Could not release ACPI Global Lock, AE_BAD_PARAMETER
    ACPI-0340: *** Error: Could not release ACPI Global Lock, AE_BAD_PARAMETER
    ACPI-0340: *** Error: Could not release ACPI Global Lock, AE_BAD_PARAMETER
    ACPI-0340: *** Error: Could not release ACPI Global Lock, AE_BAD_PARAMETER
    ACPI-0340: *** Error: Could not release ACPI Global Lock, AE_BAD_PARAMETER
    ACPI-0340: *** Error: Could not release ACPI Global Lock, AE_BAD_PARAMETER
    ACPI-0340: *** Error: Could not release ACPI Global Lock, AE_BAD_PARAMETER
    ACPI-0340: *** Error: Could not release ACPI Global Lock, AE_BAD_PARAMETER
    ACPI-0340: *** Error: Could not release ACPI Global Lock, AE_BAD_PARAMETER
    ACPI-0340: *** Error: Could not release ACPI Global Lock, AE_BAD_PARAMETER
    ACPI-0340: *** Error: Could not release ACPI Global Lock, AE_BAD_PARAMETER
    ACPI-0340: *** Error: Could not release ACPI Global Lock, AE_BAD_PARAMETER
    ACPI-0340: *** Error: Could not release ACPI Global Lock, AE_BAD_PARAMETER
    ACPI-0340: *** Error: Could not release ACPI Global Lock, AE_BAD_PARAMETER
    ACPI-0340: *** Error: Could not release ACPI Global Lock, AE_BAD_PARAMETER
    ACPI-0340: *** Error: Could not release ACPI Global Lock, AE_BAD_PARAMETER
    ACPI-0340: *** Error: Could not release ACPI Global Lock, AE_BAD_PARAMETER
    ACPI-0340: *** Error: Could not release ACPI Global Lock, AE_BAD_PARAMETER
    ACPI-0340: *** Error: Could not release ACPI Global Lock, AE_BAD_PARAMETER
    ACPI-0340: *** Error: Could not release ACPI Global Lock, AE_BAD_PARAMETER
    ACPI-0340: *** Error: Could not release ACPI Global Lock, AE_BAD_PARAMETER
    ACPI-0340: *** Error: Could not release ACPI Global Lock, AE_BAD_PARAMETER
    ACPI-0340: *** Error: Could not release ACPI Global Lock, AE_BAD_PARAMETER
    ACPI-0340: *** Error: Could not release ACPI Global Lock, AE_BAD_PARAMETER
    ACPI-0340: *** Error: Could not release ACPI Global Lock, AE_BAD_PARAMETER
    ACPI-0340: *** Error: Could not release ACPI Global Lock, AE_BAD_PARAMETER
orm0: <Option ROMs> at iomem 0xcf800-0xd0fff,0xc9800-0xcf7ff,0xc8000-0xc97ff,0x
c0000-0xc7fff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sio2: configured irq 5 not in bitmap of probed irqs 0
sio2: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0

here is just hangs, and only reset will get it going.

danny




More information about the freebsd-current mailing list