(2) 5.1-R-p2 crashes on SMP with AMI RAID and Intel 1000/Pro
Colin Faber
cfaber at fpsn.net
Mon Aug 25 15:20:40 PDT 2003
After many hours of fighting with the machine I finally managed to get a debugging kernel built.
Given I can successfully panic this machine on command what would any of you very smart developer
people like out of the panic message? Commands I should run to get a kernel.debug etc?
Petri Helenius wrote:
>
> Related to the em driver, 82540M has not worked since sometime in
> 5.1-BETA time,
> I filed a pr on that a few months ago but it seems the fault might be
> with PCI IRQ routing,
> not the em driver itself.
>
> Pete
>
>
> Hartmann, O. wrote:
>
>> On Wed, 20 Aug 2003, Colin Faber wrote:
>>
>> Hi.
>>
>> I first swapped the Intel 1000/PRO server NIC into the next slot and
>> up then the
>> machine seems to be 'stable'. Then, two days later, I changed the PSU
>> to 400W
>> units.
>>
>> I think it's a IRQ routing problem since we have had this problem
>> (spontanous reboots)
>> from FreeBSD 4.0 on). Changing the slot for the NIC helped, but this
>> is a very bad state.
>>
>> I can not remember the error message I got when the system crashed,
>> but it lookes like
>> yours and I always say the amr0-text in that message. ACPI is not
>> working on the old
>> TYAN Thunder 2500 (S1867) main PCB.
>>
>> I also changed machdep.cpu_idle_hlt = 0, but with no effect.
>>
>> At the moment, I do not dare swapping the NIC again due to the fact
>> the machine is in
>> a preliminary production state.
>>
>> I also realized some weird things when creating and deleting files
>> when the system crashed.
>> Crashes always could be forced by accessing samba services from a PC.
>> Crashes always
>> occured when heavy IO was done, but this also could be a evidence for
>> an IRQ problem, I think.
>> I do not know. The machine was 'stable' (it means: when the NIC was at
>> the crash-causing
>> slot) a whole night, but whenever our department 'got started' in the
>> morning time and heavy
>> IO was done, the machine froze. This changed when I swapped the NIC to
>> another slot!!!!
>> And now I also have two 400W PSUs.
>>
>> FreeBSD 5.1-p2 on the TYAN S1867 seems to have much more problems, but
>> I do not know whether I
>> should mention this here. truss for instance crashes. We use afbackup
>> for backing up, but
>> afbackup core dumps on this machine and it does not on a UP machine
>> also running FreeBSD 5.1-p2.
>> It also crashes on a UP kernel on this machine.
>>
>> I tried to 'truss' an afrestore call, but I had to start the tracing
>> three or four times
>> because I got this error first time:
>>
>> truss: PIOCWAIT: Input/output error
>>
>> or something like this
>>
>> root: /usr/local/samba/lib: truss -fae -o /tmp/afrestore afrestore
>> -v -p "/usr/homes/kurs*" -C /
>> truss: PIOCWAIT top of loop: Input/output error
>> truss: PIOCWAIT top of loop: Input/output error
>> truss: PIOCWAIT top of loop: Input/output error
>> truss: PIOCWAIT top of loop: Input/output error
>>
>> or sometimes truss stops lacking in a /proc/PID-XXX/mem file.
>>
>> But calling it more times will 'solve' the problem.
>>
>>
>> While writing this, I crashed the system with the above showed
>> command, this is the
>> error message from the kernel when the system froze (I wrote it down
>> from the screen):
>>
>>
>> Fatal trap 12 : page fault while in kernel mode
>> cpuid = 1; lapic.id = 00000000
>> fault virtual address = 0x24
>> fault code = supervisor read, page not present
>> instruction pointer = 0x8:0xc01b29db
>> stack pointer = 0x10:0xe8ff3b70
>> frame pointer = 0x10:0xe8ff3b84
>> code segment = base 0x0, limit 0xfffff, type 0x1b
>> = DPL 0, pres 1, def 32, gran 1
>> processor eflags = interrupt enabled, resume, IOPL = 0
>> current process = 27510 (bunzip2)
>> trap number = 12
>> panic: page fault
>> cpuid = 1, lapic.id = 00000000
>> boot() called on cpu#1
>> syncing disks, buffers remaining ... panic: absolutely cannot call
>> smp_ipi_shutdown with interrupts already disabled
>>
>> cpuid = 1; lapic.id = 00000000
>> boot() called on cpu#1
>> Uptime 1d20h18m55s
>> pfs_vncache_unload(): 6 entried remaining
>>
>> Fatal double fault:
>> eip = 0xc03134ic
>> esp = 0xe8ff1ff8
>> ebp = 0xe8ff2014
>>
>> cpuid = 1, lapic.id = 00000000
>> panic: double fault
>> cpuid = 1, lapic.id = 00000000
>> boot() called on cpu#1
>> Uptime: 1d20h18m55s
>> pfs_vncache_unload(): 6 entries remaining
>>
>> After this, the machine was dead.
>>
>> :>Hi,
>> :>
>> :>I've got nearly the same setup in a Dell 1600SC with a gig of ram
>> and a PERC4/Sc (LSI MegaRAID) card.
>> :>
>> :>Dual 2.4GHz Xeon P4 HT CPU's and I've discovered I can lock up
>> FreeBSD 5.1-RELEASE-p2 on command
>> :>simply by running something to quickly create and remove a
>> directory. i.e.:
>> :>
>> :> perl -e 'for(my $i = 0 ; $i < 9999; $i++){ mkdir("abc");
>> rmdir("abc"); }'
>> :>
>> :>
>> :>Having machdep.cpu_idle_hlt = 0 makes no difference.
>> :>
>> :>
>> :>Kernel:
>> :> FreeBSD 5.1-RELEASE-p2 FreeBSD 5.1-RELEASE-p2 #0: Mon Aug 11
>> 21:40:47 MDT 2003 i386
>> :>
>> :>Raid:
>> :> amr0: <LSILogic MegaRAID> mem 0xfcd00000-0xfcd0ffff irq 3 at
>> device 2.0 on pci1
>> :> amrd0: <LSILogic MegaRAID logical drive> on amr0
>> :> amrd0: 34556MB (70770688 sectors) RAID 5 (optimal)
>> :>
>> :>
>> :>I suspect that your and my problems are more driver related to the
>> amr driver and may be exposing
>> :>some other problem with in the kernels fs locking. I don't think (as
>> others have suggested) that
>> :>your issue is power related, or related to the combination of
>> hardware you're using. (Other than
>> :>the fact that you've got a MegaRAID card).
>> :>
>> :>The exact crash message I'm seeing is:
>> :>
>> :>panic: lockmgr: locking against myself
>> :>cpuid = 0; lapic.id 00000000
>> :>boot() called on cpu#0
>> :>
>> :>syncing disks, buffers remaining... panic: ffs_copyonwrite:
>> recursive call
>> :>cpuid = 0; lapic.id 00000000
>> :>boot() called on cpu#0
>> :>Uptime: 58s
>> :>pfs_vncache_unload(): 7 entries remaining
>> :>amr0: flushing cache...done
>> :>Terminate ACPI
>> :>
>> :>
>> :>
>> :>Hartmann, O. wrote:
>> :>
>> :>> Dear Sirs.
>> :>>
>> :>> It seems to me a never ending story. We run a box with a TYAN Thunder
>> :>> 2500 Dual SMP mainboard, 2GB ECC Tyan certified memory, AMI
>> Enterprise
>> :>> 1600 RAID adapter and additional Intel 1000/Pro server type (64 bit)
>> :>> GBit LAN NIC. With FreeBSD 4.8 this was stable, but to achive this
>> :>> state was really hard! It is a story similar to that what happend
>> when
>> :>> we changed towards FreeBSD 5.1-RELEASE-p2 on this machine.
>> :>>
>> :>> It seems to be highly dependend in which PCI slot several cards are
>> :>> attached, so I will report this here also.
>> :>>
>> :>> Phenomenon:
>> :>>
>> :>> After a while the machine was running, the SMP kernel reboots
>> :>> spontanously. This is when heavy IO is done, compiling or, when in
>> the
>> :>> morning time our department gets up and our staff connects to the
>> samba
>> :>> server.
>> :>>
>> :>> Dependend on which devices are switched on or off by BIOS, the kernel
>> :>> freezes at the stage when the amr0 RAID got recognized. I can
>> avoid this
>> :>> by enabling the built in NIC (fxp0). I can force this by putting
>> the em0
>> :>> NIC into another slot, for instance in the one remaining 64BIT/66MHz
>> :>> slot (which should be a separate bus).
>> :>>
>> :>> This 'game' was identical to that I had with FreeBSD 4.X - 4.8 and I
>> :>> found out, that putting an additional NIC into PCI slot No. 2
>> (counted
>> :>> from AGP slot on) made things clear, but using both NICs together
>> :>> (either additional fxp0 or the new em0) remains the systems
>> completely
>> :>> unstable.
>> :>>
>> :>> In FreeBSD 5.1-RELEASE-p2 and especially in FreeBSD 5.1-CURRENT this
>> :>> 'gambling' seems to reach its climax. My kernel is built up with
>> :>> SCHED_4BSD because SCHED_ULE and ADAPTIVE_MUTEXES crashes immediately
>> :>> the same way as described (running a while, then coredumping or
>> freeze
>> :>> at the stage after the amr0-RAID showed up in the kernel boot
>> messages,
>> :>> see the dmesg output below).
>> :>>
>> :>> I'm not an hardware expert, but all this wierd stuff looks like to
>> me to be
>> :>> a IRQ routing problem. I fiddled around with many hand-assigned
>> IRQ configurations,
>> :>> but nothing helped. Either the Intel 1000/Pro or the AMI RAID causing
>> :>> problems in the TYAN Thunder 2500 SMP environment.
>> :>>
>> :>> We have also a SMP machine with a similar hardware, based on an
>> ASUS CV4X-D,
>> :>> AMI Elite 1600 RAID controller and the same Intel em0 1GBit NIC.
>> OS is
>> :>> FreeBSD 4.8 and this system never had any problem!
>> :>>
>> :>> I feel a little bit helpless this moment, because I think I tried
>> every trick
>> :>> and something seems to be wrong with the combination TYAN Thunder
>> 2500 and FreeBSD
>> :>> 5.X SMP. It is also very courios, that a kernel without
>> SMP/IO_APIC freezes after
>> :>> booting at the same place (amr0 RAID recognition).
>> :>>
>> :>> Is there any help outside?
>> :>>
>> :>> I attach the kernel config file and the dmesg output. Please note:
>> I disabled both
>> :>> serial ports, the parallel port, sound and usb to get additional
>> IRQs. But I have to
>> :>> enable the built in NIC to get a bootable, but instable FreeBSD
>> 5.1-R box.
>> :>>
>> :>> ====================================
>> :>> DMESG output
>> :>> ====================================
>> :>>
>> :>> Copyright (c) 1992-2003 The FreeBSD Project.
>> :>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992,
>> 1993, 1994
>> :>> The Regents of the University of California. All rights reserved.
>> :>> FreeBSD 5.1-RELEASE-p2 #14: Wed Aug 13 09:47:00 CEST 2003
>> :>> root at atmos.physik.uni-mainz.de:/usr/obj/usr/src/sys/ATMOS
>> :>> Preloaded elf kernel "/boot/kernel/kernel" at 0xc0458000.
>> :>> Timecounter "i8254" frequency 1193182 Hz
>> :>> Timecounter "TSC" frequency 868644793 Hz
>> :>> CPU: Intel Pentium III (868.64-MHz 686-class CPU)
>> :>> Origin = "GenuineIntel" Id = 0x683 Stepping = 3
>> :>>
>> Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
>>
>> :>> real memory = 2147483648 (2048 MB)
>> :>> avail memory = 2085625856 (1989 MB)
>> :>> Programming 16 pins in IOAPIC #0
>> :>> IOAPIC #0 intpin 2 -> irq 0
>> :>> Programming 16 pins in IOAPIC #1
>> :>> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
>> :>> cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000
>> :>> cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000
>> :>> io0 (APIC): apic id: 2, version: 0x000f0011, at 0xfec00000
>> :>> io1 (APIC): apic id: 3, version: 0x000f0011, at 0xfec01000
>> :>> netsmb_dev: loaded
>> :>> Pentium Pro MTRR support enabled
>> :>> npx0: <math processor> on motherboard
>> :>> npx0: INT 16 interface
>> :>> pcibios: BIOS version 2.10
>> :>> Using $PIR table, 12 entries at 0xc00fdf00
>> :>> pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
>> :>> pci0: <PCI bus> on pcib0
>> :>> IOAPIC #1 intpin 13 -> irq 2
>> :>> IOAPIC #1 intpin 12 -> irq 16
>> :>> IOAPIC #1 intpin 2 -> irq 17
>> :>> IOAPIC #1 intpin 7 -> irq 18
>> :>> pcib1: <PCI-PCI bridge> at device 0.1 on pci0
>> :>> pci1: <PCI bus> on pcib1
>> :>> IOAPIC #1 intpin 1 -> irq 19
>> :>> pci1: <display, VGA> at device 0.0 (no driver attached)
>> :>> sym0: <896> port 0xf800-0xf8ff mem
>> 0xfeafe000-0xfeafffff,0xfeafac00-0xfeafafff irq 2 at device 1.0 on pci0
>> :>> sym0: Symbios NVRAM, ID 7, Fast-40, SE, parity checking
>> :>> sym0: open drain IRQ line driver, using on-chip SRAM
>> :>> sym0: using LOAD/STORE-based firmware.
>> :>> sym0: handling phase mismatch from SCRIPTS.
>> :>> sym1: <896> port 0xf400-0xf4ff mem
>> 0xfeafc000-0xfeafdfff,0xfeafa800-0xfeafabff irq 16 at device 1.1 on pci0
>> :>> sym1: Symbios NVRAM, ID 7, Fast-40, LVD, parity checking
>> :>> sym1: open drain IRQ line driver, using on-chip SRAM
>> :>> sym1: using LOAD/STORE-based firmware.
>> :>> sym1: handling phase mismatch from SCRIPTS.
>> :>> em0: <Intel(R) PRO/1000 Network Connection, Version - 1.5.31> port
>> 0xfcc0-0xfcff mem 0xfeac0000-0xfeadffff irq 17 at device 4.0 on pci0
>> :>> em0: Speed:1000 Mbps Duplex:Full
>> :>> fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port
>> 0xfc40-0xfc7f mem 0xfe900000-0xfe9fffff,0xfeaf9000-0xfeaf9fff irq 18
>> at device 7.0 on pci0
>> :>> fxp0: Ethernet address 00:e0:81:00:f0:d7
>> :>> miibus0: <MII bus> on fxp0
>> :>> inphy0: <i82555 10/100 media interface> on miibus0
>> :>> inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>> :>> isab0: <PCI-ISA bridge> port 0x500-0x50f at device 15.0 on pci0
>> :>> isa0: <ISA bus> on isab0
>> :>> pci0: <mass storage, ATA> at device 15.1 (no driver attached)
>> :>> pcib2: <ServerWorks host to PCI bridge> at pcibus 2 on motherboard
>> :>> pci2: <PCI bus> on pcib2
>> :>> pcib3: <PCI-PCI bridge> at device 2.0 on pci2
>> :>> pci3: <PCI bus> on pcib3
>> :>> IOAPIC #1 intpin 11 -> irq 20
>> :>> IOAPIC #1 intpin 8 -> irq 21
>> :>> pcib4: <PCI-PCI bridge> at device 0.0 on pci3
>> :>> pci4: <PCI bus> on pcib4
>> :>> IOAPIC #1 intpin 10 -> irq 22
>> :>> amr0: <LSILogic MegaRAID> mem 0xf0000000-0xf3ffffff irq 22 at
>> device 0.0 on pci4
>> :>> amr0: <LSILogic MegaRAID Enterprise 1600> Firmware G170, BIOS
>> F316, 64MB RAM
>> :>> pci3: <mass storage, SCSI> at device 1.0 (no driver attached)
>> :>> pci3: <mass storage, SCSI> at device 2.0 (no driver attached)
>> :>> orm0: <Option ROMs> at iomem 0xca000-0xcdfff,0xc0000-0xc9fff on isa0
>> :>> fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at
>> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
>> :>> fdc0: FIFO enabled, 8 bytes threshold
>> :>> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
>> :>> atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
>> :>> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
>> :>> kbd0 at atkbd0
>> :>> psm0: <PS/2 Mouse> irq 12 on atkbdc0
>> :>> psm0: model IntelliMouse, device ID 3
>> :>> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff
>> on isa0
>> :>> sc0: <System console> at flags 0x100 on isa0
>> :>> sc0: VGA <8 virtual consoles, flags=0x300>
>> :>> sio0: configured irq 4 not in bitmap of probed irqs 0
>> :>> sio0: port may not be enabled
>> :>> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
>> :>> sio0: type 8250 or not responding
>> :>> sio1: configured irq 3 not in bitmap of probed irqs 0
>> :>> sio1: port may not be enabled
>> :>> ppc0: parallel port not found.
>> :>> unknown: <PNP0303> can't assign resources (port)
>> :>> psmcpnp0: irq resource info is missing; assuming irq 12
>> :>> unknown: <PNP0700> can't assign resources (port)
>> :>> ppc1: parallel port not found.
>> :>> APIC_IO: Testing 8254 interrupt delivery
>> :>> APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC
>> #0 intpin 2
>> :>> APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
>> :>> Timecounters tick every 1.000 msec
>> :>> ipfw2 initialized, divert enabled, rule-based forwarding enabled,
>> default to deny, logging unlimited
>> :>> DUMMYNET initialized (011031)
>> :>> Waiting 5 seconds for SCSI devices to settle
>> :>> (noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
>> :>> (noperiph:sym1:0:-1:-1): SCSI BUS reset delivered.
>> :>> amrd0: <LSILogic MegaRAID logical drive> on amr0
>> :>> amrd0: 245014MB (501788672 sectors) RAID 5 (optimal)
>> :>>
>> :>> ===> freezing here!
>> :>>
>> :>> sa0 at sym1 bus 0 target 5 lun 0
>> :>> sa0: <HP C5713A H910> Removable Sequential Access SCSI-2 device
>> :>> sa0: 40.000MB/s transfers (20.000MHz, offset 31, 16bit)
>> :>> ch0 at sym1 bus 0 target 5 lun 1
>> :>> ch0: <HP C5713A H910> Removable Changer SCSI-2 device
>> :>> ch0: 40.000MB/s transfers (20.000MHz, offset 31, 16bit)
>> :>> ch0: 6 slots, 1 drive, 0 pickers, 0 portals
>> :>> SMP: AP CPU #1 Launched!
>> :>> Mounting root from ufs:/dev/amrd0s1a
>> :>> cd0 at sym0 bus 0 target 3 lun 0
>> :>> cd0: <TEAC CD-ROM CD-532S 1.0A> Removable CD-ROM SCSI-2 device
>> :>> cd0: 20.000MB/s transfers (20.000MHz, offset 16)
>> :>> cd0: Attempt to query device size failed: NOT READY, Medium not
>> present
>> :>>
>> :>> ========================
>> :>> KERNEL config file
>> :>> ========================
>> :>>
>> :>> machine i386
>> :>> cpu I686_CPU
>> :>> ident ATMOS
>> :>>
>> :>> options SMP # Symmetric MultiProcessor
>> Kernel
>> :>> options APIC_IO # Symmetric (APIC) I/O
>> :>>
>> :>> maxusers 0
>> :>>
>> :>> hints "ATMOS.hints" #Default places to look for
>> devices.
>> :>>
>> :>>
>> :>> #options COMPAT_FREEBSD4
>> :>> options SCHED_4BSD #4BSD scheduler
>> :>>
>> :>> #options SCHED_ULE
>> :>> #options ADAPTIVE_MUTEXES
>> :>>
>> :>> #options PQ_CACHESIZE=256
>> :>>
>> :>> options CPU_ENABLE_SSE
>> :>>
>> :>> options CLK_USE_TSC_CALIBRATION
>> :>> #options HZ=1000
>> :>>
>> :>> #makeoptions CONF_CFLAGS=-fno-builtin
>> :>> #options MAXDSIZ=(1024UL*1024*1024)
>> :>> #options MAXSSIZ=(128UL*1024*1024)
>> :>> #options DFLDSIZ=(1024UL*1024*1024)
>> :>>
>> :>> options GEOM_AES
>> :>> options GEOM_APPLE
>> :>> options GEOM_BDE
>> :>> options GEOM_BSD
>> :>> options GEOM_GPT
>> :>> options GEOM_MBR
>> :>> options GEOM_PC98
>> :>> options GEOM_SUNLABEL
>> :>> options GEOM_VOL
>> :>>
>> :>> options ROOTDEVNAME=\"ufs:amrd0s1a\"
>> :>>
>> :>> options INET #InterNETworking
>> :>> #options INET6 #IPv6 communications protocols
>> :>> options FFS #Berkeley Fast Filesystem
>> :>> options SOFTUPDATES #Enable FFS soft updates support
>> :>> options UFS_ACL #Support for access control lists
>> :>> options UFS_DIRHASH #Improve performance on big
>> directories
>> :>> options NFSCLIENT #Network Filesystem Client
>> :>> options NFSSERVER #Network Filesystem Server
>> :>> options MSDOSFS #MSDOS Filesystem
>> :>> options CD9660 #ISO 9660 Filesystem
>> :>> options PROCFS #Process filesystem (requires PSEUDOFS)
>> :>> options PSEUDOFS #Pseudo-filesystem framework
>> :>> options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
>> :>> options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI
>> :>>
>> :>> options SYSVSHM #SYSV-style shared memory
>> :>> options SYSVMSG #SYSV-style message queues
>> :>> options SYSVSEM #SYSV-style semaphores
>> :>>
>> :>> options NETSMB
>> :>> options NETSMBCRYPTO
>> :>> options LIBMCHAIN
>> :>> options LIBICONV
>> :>>
>> :>> #options WATCHDOG
>> :>>
>> :>> options NETGRAPH
>> :>> #options NETGRAPH_ASYNC
>> :>> #options NETGRAPH_BPF
>> :>> #options NETGRAPH_BRIDGE
>> :>> #options NETGRAPH_CISCO
>> :>> #options NETGRAPH_ECHO
>> :>> #options NETGRAPH_ETHER
>> :>> #options NETGRAPH_FRAME_RELAY
>> :>> #options NETGRAPH_GIF
>> :>> #options NETGRAPH_GIF_DEMUX
>> :>> #options NETGRAPH_HOLE
>> :>> #options NETGRAPH_IFACE
>> :>> #options NETGRAPH_IP_INPUT
>> :>> #options NETGRAPH_KSOCKET
>> :>> #options NETGRAPH_L2TP
>> :>> #options NETGRAPH_LMI
>> :>> #options NETGRAPH_MPPC_ENCRYPTION
>> :>> #options NETGRAPH_ONE2MANY
>> :>> #options NETGRAPH_PPP
>> :>> #options NETGRAPH_PPPOE
>> :>> #options NETGRAPH_PPTPGRE
>> :>> #options NETGRAPH_RFC1490
>> :>> #options NETGRAPH_SOCKET
>> :>> #options NETGRAPH_SPLIT
>> :>> #options NETGRAPH_TEE
>> :>> #options NETGRAPH_TTY
>> :>> #options NETGRAPH_UI
>> :>> #options NETGRAPH_VJC
>> :>>
>> :>> options MROUTING
>> :>> options IPFIREWALL
>> :>> options IPFIREWALL_VERBOSE
>> :>> options IPFIREWALL_FORWARD
>> :>> #options IPFIREWALL_VERBOSE_LIMIT=100
>> :>> #options IPFIREWALL_DEFAULT_TO_ACCEPT
>> :>> #options IPV6FIREWALL
>> :>> #options IPV6FIREWALL_VERBOSE
>> :>> #options IPV6FIREWALL_VERBOSE_LIMIT=100
>> :>> #options IPV6FIREWALL_DEFAULT_TO_ACCEPT
>> :>> options IPDIVERT
>> :>> #options IPFILTER
>> :>> #options IPFILTER_LOG
>> :>> #options IPFILTER_DEFAULT_BLOCK
>> :>> options IPSTEALTH
>> :>>
>> :>> options RANDOM_IP_ID
>> :>>
>> :>> options ACCEPT_FILTER_DATA
>> :>> #options ACCEPT_FILTER_HTTP
>> :>>
>> :>> options TCP_DROP_SYNFIN
>> :>> options DUMMYNET
>> :>> #options BRIDGE
>> :>>
>> :>> options QUOTA
>> :>>
>> :>> options _KPOSIX_PRIORITY_SCHEDULING
>> :>> options P1003_1B_SEMAPHORES
>> :>>
>> :>> #options MAC
>> :>> #options MAC_BIBA
>> :>> #options MAC_BSDEXTENDED
>> :>> #options MAC_DEBUG
>> :>> #options MAC_IFOFF
>> :>> #options MAC_LOMAC
>> :>> #options MAC_MLS
>> :>> #options MAC_NONE
>> :>> #options MAC_PARTITION
>> :>> #options MAC_SEEOTHERUIDS
>> :>> #options MAC_TEST
>> :>>
>> :>> options KBD_INSTALL_CDEV # install a CDEV entry in /dev
>> :>>
>> :>> device isa
>> :>> #options AUTO_EOI_1
>> :>>
>> :>> device pci
>> :>>
>> :>> device agp
>> :>>
>> :>> # Floppy drives
>> :>> device fdc
>> :>>
>> :>> # SCSI Controllers
>> :>> device sym # NCR/Symbios Logic (newer chipsets +
>> those of `ncr')
>> :>> #device ahc
>> :>>
>> :>> # SCSI peripherals
>> :>> device scbus # SCSI bus (required)
>> :>> device ch # SCSI media changers
>> :>> device da # Direct Access (disks)
>> :>> device sa # Sequential Access (tape etc)
>> :>> device cd # CD
>> :>> device pass # Passthrough device (direct SCSI access)
>> :>> device ses # SCSI Environmental Services (and SAF-TE)
>> :>>
>> :>>
>> :>> # RAID controllers
>> :>> device amr # AMI MegaRAID
>> :>>
>> :>>
>> :>> #options CHANGER_MIN_BUSY_SECONDS=2
>> :>> #options CHANGER_MAX_BUSY_SECONDS=10
>> :>>
>> :>> #options SA_IO_TIMEOUT=4
>> :>> #options SA_SPACE_TIMEOUT=60
>> :>> #options SA_REWIND_TIMEOUT=(2*60)
>> :>> #options SA_ERASE_TIMEOUT=(4*60)
>> :>> #options SA_1FM_AT_EOD
>> :>>
>> :>> #options SCSI_PT_DEFAULT_TIMEOUT=60
>> :>> options SES_ENABLE_PASSTHROUGH
>> :>>
>> :>>
>> :>> # atkbdc0 controls both the keyboard and the PS/2 mouse
>> :>> device atkbdc # AT keyboard controller
>> :>> device atkbd # AT keyboard
>> :>> options ATKBD_DFLT_KEYMAP
>> :>> makeoptions ATKBD_DFLT_KEYMAP=us.iso
>> :>>
>> :>> device psm # PS/2 mouse
>> :>>
>> :>> device vga # VGA video card driver
>> :>>
>> :>> device splash # Splash screen and screen saver support
>> :>>
>> :>> # syscons is the default console driver, resembling an SCO console
>> :>> device sc
>> :>> options MAXCONS=8
>> :>>
>> :>> #options SC_ALT_MOUSE_IMAGE
>> :>> options SC_DFLT_FONT
>> :>> makeoptions SC_DFLT_FONT=cp850
>> :>>
>> :>> options SC_DISABLE_DDBKEY
>> :>> options SC_DISABLE_REBOOT
>> :>> options SC_HISTORY_SIZE=512
>> :>> #options SC_MOUSE_CHAR=0x3
>> :>> options SC_PIXEL_MODE
>> :>> options SC_NORM_ATTR=(FG_GREEN|BG_BLACK)
>> :>> options SC_NORM_REV_ATTR=(FG_YELLOW|BG_GREEN)
>> :>> options SC_KERNEL_CONS_ATTR=(FG_RED|BG_BLACK)
>> :>> options SC_KERNEL_CONS_REV_ATTR=(FG_BLACK|BG_RED)
>> :>> #options SC_CUT_SPACES2TABS
>> :>> #options SC_CUT_SEPCHARS=\"x09\"
>> :>> #options SC_TWOBUTTON_MOUSE
>> :>> #options SC_NO_CUTPASTE
>> :>> #options SC_NO_FONT_LOADING
>> :>> #options SC_NO_HISTORY
>> :>> #options SC_NO_SYSMOUSE
>> :>> #options SC_NO_SUSPEND_VTYSWITCH
>> :>>
>> :>> device npx
>> :>>
>> :>> #device pmtimer
>> :>>
>> :>> #device sio # 8250, 16[45]50 based serial ports
>> :>>
>> :>> # Parallel port
>> :>> #device ppc
>> :>> #device ppbus # Parallel port bus (required)
>> :>> #device lpt # Printer
>> :>> #device plip # TCP/IP over parallel
>> :>> #device ppi # Parallel port interface device
>> :>> #device vpo # Requires scbus and da
>> :>>
>> :>>
>> :>> device miibus # MII bus support
>> :>> device em
>> :>> #device fxp # Intel EtherExpress PRO/100B (82557,
>> 82558)
>> :>>
>> :>> device random # Entropy device
>> :>> device loop # Network loopback
>> :>> device ether # Ethernet support
>> :>> #device tun # Packet tunnel.
>> :>> device pty # Pseudo-ttys (telnet etc)
>> :>> #device gif # IPv6 and IPv4 tunneling
>> :>> #device faith # IPv6-to-IPv4 relaying (translation)
>> :>>
>> :>> device bpf # Berkeley packet filter
>> :>>
>> :>>
>> :>> ------------------
>> :>>
>> :>>
>> :>> Thanks a lot for your help,
>> :>>
>> :>> Oliver
>> :>> --
>> :>> MfG
>> :>> O. Hartmann
>> :>>
>> :>> ohartman at mail.physik.uni-mainz.de
>> :>> ------------------------------------------------------------------
>> :>> Systemadministration des Institutes fuer Physik der Atmosphaere (IPA)
>> :>> ------------------------------------------------------------------
>> :>> Johannes Gutenberg Universitaet Mainz
>> :>> Becherweg 21
>> :>> 55099 Mainz
>> :>>
>> :>> Tel: +496131/3924662 (Maschinenraum)
>> :>> Tel: +496131/3924144 (Buero)
>> :>> FAX: +496131/3923532
>> :>> _______________________________________________
>> :>> freebsd-smp at freebsd.org mailing list
>> :>> http://lists.freebsd.org/mailman/listinfo/freebsd-smp
>> :>> To unsubscribe, send any mail to
>> "freebsd-smp-unsubscribe at freebsd.org"
>> :>>
>> :>>
>> :>
>> :>
>>
>> --
>> MfG
>> O. Hartmann
>>
>> ohartman at mail.physik.uni-mainz.de
>> ------------------------------------------------------------------
>> Systemadministration des Institutes fuer Physik der Atmosphaere (IPA)
>> ------------------------------------------------------------------
>> Johannes Gutenberg Universitaet Mainz
>> Becherweg 21
>> 55099 Mainz
>>
>> Tel: +496131/3924662 (Maschinenraum)
>> Tel: +496131/3924144 (Buero)
>> FAX: +496131/3923532
>> _______________________________________________
>> freebsd-smp at freebsd.org mailing list
>> http://lists.freebsd.org/mailman/listinfo/freebsd-smp
>> To unsubscribe, send any mail to "freebsd-smp-unsubscribe at freebsd.org"
>>
>>
>
>
> _______________________________________________
> freebsd-smp at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-smp
> To unsubscribe, send any mail to "freebsd-smp-unsubscribe at freebsd.org"
>
>
More information about the freebsd-current
mailing list