HEADS UP! ATAng committed

Mon Aug 25 08:35:05 PDT 2003

;), Sun, Aug 24, 2003 at 11:27:05AM +0200, Soren Schmidt said that
> 
> ATAng has just been committed. You need to make world after this update
> as atacontrol etc needs to pick up the changes.
> 
> -Søren
> _______________________________________________
> freebsd-current at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe at freebsd.org"


hi 

i try ATAng from current cvs and have found old warnings:

ad4: WARNING-SETFEATURES recovered from missing interupt
ad4: WARNING-READ_DMA recovered from missing interupt
[..] 
ad4: 38166MB <WDC WD400BB-00CLB0> [77545/16/63] at ata2-master UDMA100
[..]
ad4: WARNING-SETFEATURES recovered from missing interupt
ad4: WARNING-READ_DMA recovered from missing interupt
[..]

in circle longer than 5 minutes then i reboot box and use last kernel
which worked with my ATA from: May 19 2003   :(


it is old warning/error but nothing changed

dmesg attached


bye
-- 
-
Radko Keves
-------------- next part --------------
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.1-BETA #32: Mon May 19 15:01:33 CEST 2003
    root at kripel:/usr/src/sys/i386/compile/angel
Preloaded elf kernel "/boot/kernel.old/kernel" at 0xc04f8000.
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 927107442 Hz
CPU: Intel Pentium III (927.11-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x68a  Stepping = 10
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 268435456 (256 MB)
avail memory = 255422464 (243 MB)
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
Using $PIR table, 7 entries at 0xc00ede90
pcib0: <ServerWorks NB6635 3.0LE host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0x1800-0x183f mem 0xb1000000-0xb10fffff,0xb1100000-0xb1100fff irq 11 at device 5.0 on pci1
fxp0: Ethernet address 00:50:8b:e9:e8:92
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci1: <display, VGA> at device 6.0 (no driver attached)
pci1: <base peripheral> at device 7.0 (no driver attached)
atapci0: <CMD 649 UDMA100 controller> port 0x1840-0x184f,0x1864-0x1867,0x1858-0x185f,0x1860-0x1863,0x1850-0x1857 irq 10 at device 8.0 on pci1
ata2: at 0x1850 on atapci0
ata3: at 0x1858 on atapci0
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x2000-0x207f mem 0xb1500000-0xb150007f irq 11 at device 4.0 on pci0
xl0: Ethernet address: 00:04:76:9d:0c:cd
miibus1: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus1
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> port 0xfc00-0xfc0f at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <ServerWorks ROSB4 UDMA33 controller> port 0x2080-0x208f at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci1
ata1: at 0x170 irq 15 on atapci1
pci0: <serial bus, USB> at device 15.2 (no driver attached)
pcib5: <ServerWorks NB6635 3.0LE host to PCI bridge> at pcibus 5 on motherboard
pci5: <PCI bus> on pcib5
orm0: <Option ROMs> at iomem 0xe8000-0xeffff,0xd2000-0xdcfff,0xd0000-0xd07ff,0xc8000-0xcffff,0xc0000-0xc7fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
pmtimer0 on isa0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
Timecounters tick every 10.000 msec
ata0-slave: timeout waiting for interrupt
ata0-slave: ATA identify failed
ad4: 38166MB <WDC WD400BB-00CLB0> [77545/16/63] at ata2-master UDMA100
ad5: 38166MB <WDC WD400BB-00CLB0> [77545/16/63] at ata2-slave UDMA100
ata0-master: <Compaq CRD-8402B/1.03> - NO DRIVER!
Mounting root from ufs:/dev/ad4s1a
WARNING: /export was not properly dismounted
WARNING: /root was not properly dismounted
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
WARNING: /backhome was not properly dismounted
WARNING: /var/mail was not properly dismounted
WARNING: /var/www was not properly dismounted