rc.d networking changes broken
Pawel Worach
pawel.worach at telia.com
Fri Apr 18 17:29:35 PDT 2003
Hi!
With the latest rc.d checkin the netif(?) script is executed
twice and that makes the default route go away. Any ideas?
Regards
Pawel
nework related rc.conf stuff:
ifconfig_fxp0="inet 192.168.1.11 netmask 0xffffff00 link0"
ifconfig_fxp1="inet 192.168.254.1 netmask 0xffffff00 link0"
defaultrouter="192.168.1.10"
gateway_enable="YES"
ipv6_enable="YES"
boot log:
Setting hostname: darkstar.
fxp0: Microcode loaded, int_delay: 1000 usec bundle_max: 6
fxp0: Microcode loaded, int_delay: 1000 usec bundle_max: 6
fxp1: Microcode loaded, int_delay: 1000 usec bundle_max: 6
fxp1: Microcode loaded, int_delay: 1000 usec bundle_max: 6
fxp0: flags=9843<UP,BROADCAST,RUNNING,SIMPLEX,LINK0,MULTICAST> mtu 1500
inet 192.168.1.11 netmask 0xffffff00 broadcast 192.168.1.255
inet6 fe80::290:27ff:fe8c:1e2c%fxp0 prefixlen 64 tentative scopeid
0x1
ether 00:90:27:8c:1e:2c
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
fxp1: flags=9843<UP,BROADCAST,RUNNING,SIMPLEX,LINK0,MULTICAST> mtu 1500
inet 192.168.254.1 netmask 0xffffff00 broadcast 192.168.254.255
inet6 fe80::290:27ff:fe76:b0c1%fxp1 prefixlen 64 tentative scopeid
0x2
ether 00:90:27:76:b0:c1
media: Ethernet 10baseT/UTP <full-duplex>
status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
inet 127.0.0.1 netmask 0xff000000
add net default: gateway 192.168.1.10
Additional routing options: IP gateway=YES.
add net ::ffff:0f.0.0.0: gateway x::1
add net ::0.0.0.00: gateway ::1
net.inet6.ip6.forwarding: 0 -> 0
net.inet6.ip6.iaccept_rtadv: 0 -> 1
add net fe80::: gateway ::1
add net ff02::: gateway ::1
IPv4 mapped IPv6 address support=NO
- snip <rpc, nfs, ntp, ssh, sendmail, local stuff here> -
Additional TCP options:.
Doing initial network setup: host.conf.
fxp0: Microcode loaded, int_delay: 1000 usec bundle_max: 6
fxp0: Microcode loaded, int_delay: 1000 usec bundle_max: 6
fxp1: Microcode loaded, int_delay: 1000 usec bundle_max: 6
fxp1: Microcode loaded, int_delay: 1000 usec bundle_max: 6
fxp0: flags=9843<UP,BROADCAST,RUNNING,SIMPLEX,LINK0,MULTICAST> mtu 1500
inet6 fe80::290:27ff:fe8c:1e2c%fxp0 prefixlen 64 scopeid 0x1
inet 192.168.1.11 netmask 0xffffff00 broadcast 192.168.1.255
ether 00:90:27:8c:1e:2c
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
fxp1: flags=9843<UP,BROADCAST,RUNNING,SIMPLEX,LINK0,MULTICAST> mtu 1500
inet6 fe80::290:27ff:fe76:b0c1%fxp1 prefixlen 64 scopeid 0x2
inet 192.168.254.1 netmask 0xffffff00 broadcast 192.168.254.255
ether 00:90:27:76:b0:c1
media: Ethernet 10baseT/UTP <full-duplex>
status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
inet 127.0.0.1 netmask 0xff000000
Starting inetd.
Starting cron.
More information about the freebsd-current
mailing list