[Bug 191348] [mps] LSI2308 with WD3000FYYZ drives disappears after hotswapping
bugzilla-noreply at freebsd.org
bugzilla-noreply at freebsd.org
Thu May 28 18:24:38 UTC 2015
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=191348
--- Comment #19 from commit-hook at freebsd.org ---
A commit references this bug:
Author: slm
Date: Thu May 28 18:24:28 UTC 2015
New revision: 283661
URL: https://svnweb.freebsd.org/changeset/base/283661
Log:
The wrong commit message was given with r283632. This is the correct
message.
- Updated all files with 2015 Avago copyright, and updated LSI's copyright
dates.
- Changed all of the PCI device strings from LSI to Avago Technologies (LSI).
- Added a sysctl variable to control how StartStopUnit behavior works. User
can
select to spin down disks based on if disk is SSD or HDD.
- Inquiry data is required to tell if a disk will support SSU at shutdown or
not. Due to the addition of mpssas_async, which gets Advanced Info but not
Inquiry data, the setting of supports_SSU was moved to the
mpssas_scsiio_complete function, which snoops for any Inquiry commands.
And,
since disks are shutdown as a target and not a LUN, this process was
simplified by basing it on targets and not LUNs.
- Added a sysctl variable that sets the amount of time to retry after sending
a
failed SATA ID command. This helps with some bad disks and large disks that
require a lot of time to spin up. Part of this change was to add a callout
to
handle timeouts with the SATA ID command. The callout function is called
mpssas_ata_id_timeout(). (Fixes PR 191348)
- Changed the way resets work by allowing I/O to continue to devices that are
not currently under a reset condition. This uses devq's instead of simq's
and
makes use of the MPSSAS_TARGET_INRESET flag. This change also adds a
function
called mpssas_prepare_tm().
- Some changes were made to reduce code duplication when getting a SAS
address
for a SATA disk.
- Fixed some formatting and whitespace.
- Bump version of mps driver to 9.255.01.00-fbsd
PR: 191348
Reviewed by: ken, scottl
Approved by: ken, scottl
MFC after: 1 week
Changes:
head/sys/dev/mpr/mpi/mpi2.h
head/sys/dev/mpr/mpi/mpi2_cnfg.h
head/sys/dev/mpr/mpi/mpi2_hbd.h
head/sys/dev/mpr/mpi/mpi2_history.txt
head/sys/dev/mpr/mpi/mpi2_init.h
head/sys/dev/mpr/mpi/mpi2_ioc.h
head/sys/dev/mpr/mpi/mpi2_ra.h
head/sys/dev/mpr/mpi/mpi2_raid.h
head/sys/dev/mpr/mpi/mpi2_sas.h
head/sys/dev/mpr/mpi/mpi2_targ.h
head/sys/dev/mpr/mpi/mpi2_tool.h
head/sys/dev/mpr/mpi/mpi2_type.h
head/sys/dev/mpr/mpr.c
head/sys/dev/mpr/mpr_config.c
head/sys/dev/mpr/mpr_ioctl.h
head/sys/dev/mpr/mpr_mapping.c
head/sys/dev/mpr/mpr_mapping.h
head/sys/dev/mpr/mpr_pci.c
head/sys/dev/mpr/mpr_sas.c
head/sys/dev/mpr/mpr_sas.h
head/sys/dev/mpr/mpr_sas_lsi.c
head/sys/dev/mpr/mpr_user.c
head/sys/dev/mpr/mprvar.h
--
You are receiving this mail because:
You are the assignee for the bug.
More information about the freebsd-bugs
mailing list