kern/188899: cas ethernet driver seems to have issues with some multiport card and mother board combinations
Clif Cox
clif at eugeneweb.com
Tue Apr 22 20:10:00 UTC 2014
>Number: 188899
>Category: kern
>Synopsis: cas ethernet driver seems to have issues with some multiport card and mother board combinations
>Confidential: no
>Severity: non-critical
>Priority: low
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Tue Apr 22 20:10:00 UTC 2014
>Closed-Date:
>Last-Modified:
>Originator: Clif Cox
>Release: 10.0-RELEASE FreeBSD
>Organization:
>Environment:
FreeBSD BSD10 10.0-RELEASE FreeBSD 10.0-RELEASE #0 r260789: Fri Jan 17 01:46:25 UTC 2014 root at snap.freebsd.org:/usr/obj/usr/src/sys/GENERIC i386
>Description:
Greetings,
This is related to problem reports 179033, and 188897 in that the motherboard is the same. Initially I RMAed the mother board thinking it was a hardware problem. That was before I tested it under Linux. See the attached file of output under various situations and OSes.
As you can see for ifconfig, the "Status:" line does not show up for the cas Nics. Neither does the fourth port cas3. If you run dhclient on cas0 it will fail gracefully as you might expect, if no cable is connected. If a live cable is connected and you run "dhclient cas0" you will eventually get:
cas0: cas_eint: status 0x41000, PCI buss error 0x20
cas0: cas_eint: status 0x41000, PCI buss error 0x20
..
forever with no way to interrupt.
If you merely boot with the cable connected but don't try to run dhclient you will get a few "cas0: device timeout" lines every so often.
However just having the cas quad port card in the system does not prevent re0 from working like the dc card does in PR 188897.
Thanks for a great project and I hope we can clean up these problems with the atom board's slightly nonstandard chipsets.
Best,
Clif
>How-To-Repeat:
Boot the Atom D510MO Board with cas chipset quad port card(s) as in PR 179033
>Fix:
Patch attached with submission follows:
***************************************************************************
Atom D510MO Board without CAS quad port card
********************************* IFCONFIG *********************************
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
ether 00:27:0e:07:48:a0
inet 192.168.1.13 netmask 0xffffff00 broadcast 192.168.1.255
inet 192.168.0.187 netmask 0xffffff00 broadcast 192.168.0.255
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
inet 127.0.0.1 netmask 0xff000000
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
********************************* DMESG *********************************
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.0-RELEASE #0 r260789: Fri Jan 17 01:46:25 UTC 2014
root at snap.freebsd.org:/usr/obj/usr/src/sys/GENERIC i386
FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610
CPU: Intel(R) Atom(TM) CPU D510 @ 1.66GHz (1666.73-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x106ca Family = 0x6 Model = 0x1c Stepping = 10
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x40e31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant, performance statistics
real memory = 4294967296 (4096 MB)
avail memory = 3388112896 (3231 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <INTEL MOPNV10N>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 HTT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP/HT): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP/HT): APIC ID: 3
ioapic0: Changing APIC ID to 8
ioapic0 <Version 2.0> irqs 0-23 on motherboard
lapic0: Forcing LINT1 to edge trigger
kbd1 at kbdmux0
random: <Software, Yarrow> initialized
acpi0: <INTEL MOPNV10N> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed03fff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x20c0-0x20c7 mem 0xe0200000-0xe027ffff,0xd0000000-0xdfffffff,0xe0100000-0xe01fffff irq 16 at device 2.0 on pci0
agp0: <Intel Pineview SVGA controller> on vgapci0
agp0: aperture size is 256M, detected 8188k stolen memory
vgapci0: Boot video device
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pcib1: failed to allocate initial prefetch window: 0xe0000000-0xe00fffff
pci1: <ACPI PCI bus> on pcib1
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x1000-0x10ff irq 16 at device 0.0 on pci1
re0: Using 1 MSI-X message
re0: Chip rev. 0x28000000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Ethernet address: 00:27:0e:07:48:a0
pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pci4: <ACPI PCI bus> on pcib4
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0x2080-0x209f irq 23 at device 29.0 on pci0
uhci0: LegSup = 0x2f00
usbus0 on uhci0
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0x2060-0x207f irq 19 at device 29.1 on pci0
uhci1: LegSup = 0x2f00
usbus1 on uhci1
uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0x2040-0x205f irq 18 at device 29.2 on pci0
uhci2: LegSup = 0x2f00
usbus2 on uhci2
uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0x2020-0x203f irq 16 at device 29.3 on pci0
uhci3: LegSup = 0x2f00
usbus3 on uhci3
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xe0280400-0xe02807ff irq 23 at device 29.7 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci0
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib5
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 SATA300 controller> port 0x20b8-0x20bf,0x20cc-0x20cf,0x20b0-0x20b7,0x20c8-0x20cb,0x20a0-0x20af mem 0xe0280000-0xe02803ff irq 19 at device 31.2 on pci0
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ata0: <ATA channel> at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1: <ATA channel> at port 0x170-0x177,0x376 irq 15 on isa0
ppc0: parallel port not found.
p4tcc0: <CPU Frequency Thermal Control> on cpu0
p4tcc1: <CPU Frequency Thermal Control> on cpu1
p4tcc2: <CPU Frequency Thermal Control> on cpu2
p4tcc3: <CPU Frequency Thermal Control> on cpu3
Timecounters tick every 1.000 msec
random: unblocking device.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
usbus4: 480Mbps High Speed USB v2.0
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
ada0 at ata2 bus 0 scbus0 target 0 lun 0
ada0: <WDC WD800JD-75MSA3 10.01E04> ATA-7 SATA 2.x device
ada0: Serial Number WD-WMAM9ZL59310
ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada0: 76293MB (156250000 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
lapic1: Forcing LINT1 to edge trigger
SMP: AP CPU #1 Launched!
lapic2: Forcing LINT1 to edge trigger
SMP: AP CPU #2 Launched!
lapic3: Forcing LINT1 to edge trigger
SMP: AP CPU #3 Launched!
Timecounter "TSC" frequency 1666726490 Hz quality 1000
Root mount waiting for: usbus4
Root mount waiting for: usbus4
uhub4: 8 ports with 8 removable, self powered
Trying to mount root from ufs:/dev/ada0s2a [rw]...
********************************* DEVINFO *********************************
nexus0
npx0
apic0
ram0
acpi0
cpu0
p4tcc0
cpufreq0
cpu1
p4tcc1
cpufreq1
cpu2
p4tcc2
cpufreq2
cpu3
p4tcc3
cpufreq3
acpi_button0
pcib0
pci0
hostb0
vgapci0
agp0
pcib1
pci1
re0
miibus0
rgephy0
pcib2
pci2
pcib3
pci3
pcib4
pci4
uhci0
usbus0
uhub0
uhci1
usbus1
uhub1
uhci2
usbus2
uhub2
uhci3
usbus3
uhub3
ehci0
usbus4
uhub4
pcib5
pci5
isab0
isa0
pmtimer0
sc0
vga0
ata0
ata1
atapci0
ata2
ata3
acpi_sysresource0
pci_link0
pci_link1
pci_link2
pci_link3
pci_link4
pci_link5
pci_link6
pci_link7
atdma0
atrtc0
atpic0
npxisa0
attimer0
acpi_sysresource1
atkbdc0
atkbd0
uart0
uart1
hpet0
acpi_timer0
********************************* VMSTAT *********************************
interrupt total rate
irq1: atkbd0 700 0
irq4: uart0 561 0
irq19: uhci1+ 1794 0
irq20: hpet0 102232 34
irq256: re0 122474 40
Total 227761 75
***************************************************************************
Atom D510MO Board with CAS quad port card
********************************* IFCONFIG *********************************
root at BSD10:~ # ifconfig
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
ether 00:27:0e:07:48:a0
inet 192.168.0.187 netmask 0xffffff00 broadcast 192.168.0.255
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
cas0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=b<RXCSUM,TXCSUM,VLAN_MTU>
ether 00:03:ba:ff:74:49
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect
cas1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=b<RXCSUM,TXCSUM,VLAN_MTU>
ether 00:03:ba:ff:74:4a
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect
cas2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=b<RXCSUM,TXCSUM,VLAN_MTU>
ether 00:03:ba:ff:74:4b
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
inet 127.0.0.1 netmask 0xff000000
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
********************************* DMESG *********************************
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.0-RELEASE #0 r260789: Fri Jan 17 01:46:25 UTC 2014
root at snap.freebsd.org:/usr/obj/usr/src/sys/GENERIC i386
FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610
CPU: Intel(R) Atom(TM) CPU D510 @ 1.66GHz (1666.72-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x106ca Family = 0x6 Model = 0x1c Stepping = 10
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x40e31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant, performance statistics
real memory = 4294967296 (4096 MB)
avail memory = 3388112896 (3231 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <INTEL MOPNV10N>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 HTT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP/HT): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP/HT): APIC ID: 3
ioapic0: Changing APIC ID to 8
ioapic0 <Version 2.0> irqs 0-23 on motherboard
lapic0: Forcing LINT1 to edge trigger
kbd1 at kbdmux0
random: <Software, Yarrow> initialized
acpi0: <INTEL MOPNV10N> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed03fff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x20c0-0x20c7 mem 0xe0a00000-0xe0a7ffff,0xd0000000-0xdfffffff,0xe0900000-0xe09fffff irq 16 at device 2.0 on pci0
agp0: <Intel Pineview SVGA controller> on vgapci0
agp0: aperture size is 256M, detected 8188k stolen memory
vgapci0: Boot video device
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x1000-0x10ff mem 0xe0804000-0xe0804fff,0xe0800000-0xe0803fff irq 16 at device 0.0 on pci1
re0: Using 1 MSI-X message
re0: Chip rev. 0x28000000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Ethernet address: 00:27:0e:07:48:a0
pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pci4: <ACPI PCI bus> on pcib4
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0x2080-0x209f irq 23 at device 29.0 on pci0
uhci0: LegSup = 0x2f00
usbus0 on uhci0
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0x2060-0x207f irq 19 at device 29.1 on pci0
uhci1: LegSup = 0x2f00
usbus1 on uhci1
uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0x2040-0x205f irq 18 at device 29.2 on pci0
uhci2: LegSup = 0x2f00
usbus2 on uhci2
uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0x2020-0x203f irq 16 at device 29.3 on pci0
uhci3: LegSup = 0x2f00
usbus3 on uhci3
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xe0a80400-0xe0a807ff irq 23 at device 29.7 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci0
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib5: failed to allocate initial memory window: 0xe0000000-0xe07fffff
pci5: <ACPI PCI bus> on pcib5
pcib6: <PCI-PCI bridge> at device 0.0 on pci5
pcib6: failed to allocate initial memory window: 0xe0000000-0xe07fffff
pci6: <PCI bus> on pcib6
cas0: <NS DP83065 Saturn Gigabit Ethernet> mem 0xe0600000-0xe07fffff irq 21 at device 0.0 on pci6
miibus1: <MII bus> on cas0
nsgphy0: <DP83865 1000BASE-T media interface> PHY 1 on miibus1
none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
cas0: 16kB RX FIFO, 9kB TX FIFO
cas0: Ethernet address: 00:03:ba:ff:74:49
cas1: <NS DP83065 Saturn Gigabit Ethernet> mem 0xe0400000-0xe05fffff irq 22 at device 1.0 on pci6
miibus2: <MII bus> on cas1
nsgphy1: <DP83865 1000BASE-T media interface> PHY 1 on miibus2
none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
cas1: 16kB RX FIFO, 9kB TX FIFO
cas1: Ethernet address: 00:03:ba:ff:74:4a
cas2: <NS DP83065 Saturn Gigabit Ethernet> mem 0xe0200000-0xe03fffff irq 23 at device 2.0 on pci6
miibus3: <MII bus> on cas2
nsgphy2: <DP83865 1000BASE-T media interface> PHY 1 on miibus3
none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
cas2: 16kB RX FIFO, 9kB TX FIFO
cas2: Ethernet address: 00:03:ba:ff:74:4b
cas3: <NS DP83065 Saturn Gigabit Ethernet> irq 20 at device 3.0 on pci6
cas3: 0x200000 bytes of rid 0x10 res 3 failed (0, 0xffffffff).
cas3: failed to allocate resources
device_attach: cas3 attach returned 6
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 SATA300 controller> port 0x20b8-0x20bf,0x20cc-0x20cf,0x20b0-0x20b7,0x20c8-0x20cb,0x20a0-0x20af mem 0xe0a80000-0xe0a803ff irq 19 at device 31.2 on pci0
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ata0: <ATA channel> at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1: <ATA channel> at port 0x170-0x177,0x376 irq 15 on isa0
ppc0: parallel port not found.
p4tcc0: <CPU Frequency Thermal Control> on cpu0
p4tcc1: <CPU Frequency Thermal Control> on cpu1
p4tcc2: <CPU Frequency Thermal Control> on cpu2
p4tcc3: <CPU Frequency Thermal Control> on cpu3
Timecounters tick every 1.000 msec
random: unblocking device.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
usbus4: 480Mbps High Speed USB v2.0
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
ada0 at ata2 bus 0 scbus0 target 0 lun 0
ada0: <WDC WD800JD-75MSA3 10.01E04> ATA-7 SATA 2.x device
ada0: Serial Number WD-WMAM9ZL59310
ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada0: 76293MB (156250000 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
lapic1: Forcing LINT1 to edge trigger
SMP: AP CPU #1 Launched!
lapic3: Forcing LINT1 to edge trigger
SMP: AP CPU #3 Launched!
lapic2: Forcing LINT1 to edge trigger
SMP: AP CPU #2 Launched!
Timecounter "TSC" frequency 1666724320 Hz quality 1000
Root mount waiting for: usbus4
Root mount waiting for: usbus4
uhub4: 8 ports with 8 removable, self powered
Trying to mount root from ufs:/dev/ada0s2a [rw]...
WARNING: / was not properly dismounted
re0: link state changed to DOWN
re0: link state changed to UP
********************************* DEVINFO *********************************
nexus0
npx0
apic0
ram0
acpi0
cpu0
p4tcc0
cpufreq0
cpu1
p4tcc1
cpufreq1
cpu2
p4tcc2
cpufreq2
cpu3
p4tcc3
cpufreq3
acpi_button0
pcib0
pci0
hostb0
vgapci0
agp0
pcib1
pci1
re0
miibus0
rgephy0
pcib2
pci2
pcib3
pci3
pcib4
pci4
uhci0
usbus0
uhub0
uhci1
usbus1
uhub1
uhci2
usbus2
uhub2
uhci3
usbus3
uhub3
ehci0
usbus4
uhub4
pcib5
pci5
pcib6
pci6
cas0
miibus1
nsgphy0
cas1
miibus2
nsgphy1
cas2
miibus3
nsgphy2
isab0
isa0
pmtimer0
sc0
vga0
ata0
ata1
atapci0
ata2
ata3
acpi_sysresource0
pci_link0
pci_link1
pci_link2
pci_link3
pci_link4
pci_link5
pci_link6
pci_link7
atdma0
atrtc0
atpic0
npxisa0
attimer0
acpi_sysresource1
atkbdc0
atkbd0
uart0
uart1
hpet0
acpi_timer0
********************************* VMSTAT *********************************
interrupt total rate
irq1: atkbd0 75 0
irq4: uart0 694 3
irq19: uhci1+ 2011 10
irq20: hpet0 14709 79
irq256: re0 7897 42
Total 25386 137
***************************************************************************
Atom D510MO Board with CAS quad port card runing under SysresCD linux
********************************* IFCONFIG *********************************
root at sysresccd /root % ifconfig
eth0 Link encap:Ethernet HWaddr 00:27:0e:07:48:a0
inet6 addr: fe80::227:eff:fe07:48a0/64 Scope:Link
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:27299 errors:0 dropped:0 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1855569 (1.7 MiB) TX bytes:1152 (1.1 KiB)
Interrupt:44
eth1 Link encap:Ethernet HWaddr 00:03:ba:ff:74:49
inet addr:192.168.0.84 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::203:baff:feff:7449/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2838 errors:0 dropped:0 overruns:0 frame:0
TX packets:61 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:194514 (189.9 KiB) TX bytes:8981 (8.7 KiB)
Interrupt:21
eth2 Link encap:Ethernet HWaddr 00:03:ba:ff:74:4a
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:22
eth3 Link encap:Ethernet HWaddr 00:03:ba:ff:74:4b
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:23
eth4 Link encap:Ethernet HWaddr 00:03:ba:ff:74:4c
inet6 addr: fe80::203:baff:feff:744c/64 Scope:Link
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:204 errors:0 dropped:0 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:14428 (14.0 KiB) TX bytes:1152 (1.1 KiB)
Interrupt:20
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
********************************* DMESG *********************************
root at sysresccd /root % dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.29-std260-i586 (root at catalyst) (gcc version 4.4.6 (Gentoo 4.4.6-r1 p1.0, pie-0.4.5) ) #2 SMP Mon Apr 23 18:26:37 UTC 2012
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
[ 0.000000] BIOS-e820: 000000000008f000 - 0000000000090000 (reserved)
[ 0.000000] BIOS-e820: 0000000000090000 - 000000000009ec00 (usable)
[ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cee98000 (usable)
[ 0.000000] BIOS-e820: 00000000cee98000 - 00000000ceebf000 (reserved)
[ 0.000000] BIOS-e820: 00000000ceebf000 - 00000000cef48000 (usable)
[ 0.000000] BIOS-e820: 00000000cef48000 - 00000000cefbf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cefbf000 - 00000000ceff1000 (usable)
[ 0.000000] BIOS-e820: 00000000ceff1000 - 00000000cefff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cefff000 - 00000000cf000000 (usable)
[ 0.000000] BIOS-e820: 00000000cf000000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI 2.5 present.
[ 0.000000] DMI: /D510MO, BIOS MOPNV10N.86A.0516.2011.0331.1730 03/31/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0xcf000 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FF0000000 write-back
[ 0.000000] 3 base 0CF000000 mask FFF000000 uncachable
[ 0.000000] 4 base 100000000 mask FC0000000 write-back
[ 0.000000] 5 base 0FFFF0000 mask FFFFF0000 write-protect
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00fbe50] fbe50
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-0000000036ffe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0036c00000 page 2M
[ 0.000000] 0036c00000 - 0036ffe000 page 4k
[ 0.000000] kernel direct mapping tables up to 36ffe000 @ 17f9000-1800000
[ 0.000000] RAMDISK: 7f7a8000 - 7ffff000
[ 0.000000] Allocated new RAMDISK: 367a7000 - 36ffdb34
[ 0.000000] Move RAMDISK from 000000007f7a8000 - 000000007fffeb33 to 367a7000 - 36ffdb33
[ 0.000000] ACPI: RSDP 000f2060 00024 (v02 INTEL )
[ 0.000000] ACPI: XSDT ceffe120 0004C (v01 INTEL MOPNV10N 00000204 01000013)
[ 0.000000] ACPI: FACP ceffd000 000F4 (v03 INTEL MOPNV10N 00000204 MSFT 0100000D)
[ 0.000000] ACPI: DSDT ceff9000 039A7 (v01 INTEL MOPNV10N 00000204 MSFT 0100000D)
[ 0.000000] ACPI: FACS cef87000 00040
[ 0.000000] ACPI: APIC ceff8000 00084 (v02 INTEL MOPNV10N 00000204 MSFT 0100000D)
[ 0.000000] ACPI: MCFG ceff7000 0003C (v01 INTEL MOPNV10N 00000204 MSFT 0100000D)
[ 0.000000] ACPI: HPET ceff6000 00038 (v01 INTEL MOPNV10N 00000204 MSFT 0100000D)
[ 0.000000] ACPI: SSDT ceff2000 0377C (v01 INTEL SSDT PM 00000204 MSFT 0100000D)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2432MB HIGHMEM available.
[ 0.000000] 879MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 36ffe000
[ 0.000000] low ram: 0 - 36ffe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00036ffe
[ 0.000000] HighMem 0x00036ffe -> 0x000cf000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[6] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000008f
[ 0.000000] 0: 0x00000090 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000cee98
[ 0.000000] 0: 0x000ceebf -> 0x000cef48
[ 0.000000] 0: 0x000cefbf -> 0x000ceff1
[ 0.000000] 0: 0x000cefff -> 0x000cf000
[ 0.000000] On node 0 totalpages: 847585
[ 0.000000] free_area_init_node: node 0, pgdat c0c70800, node_mem_map f4dc6200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3949 pages, LIFO batch:0
[ 0.000000] Normal zone: 1728 pages used for memmap
[ 0.000000] Normal zone: 219454 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4865 pages used for memmap
[ 0.000000] HighMem zone: 617557 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000008f000 - 0000000000090000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:28000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f4800000 s25472 r0 d23680 u1048576
[ 0.000000] pcpu-alloc: s25472 r0 d23680 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 840960
[ 0.000000] Kernel command line: scandelay=5 initrd=initram.igz BOOT_IMAGE=rescuecd
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 13565696 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00036ffe:000cf000)
[ 0.000000] Memory: 3325232k/3391488k available (5629k kernel code, 65108k reserved, 3075k data, 6344k init, 2489688k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xff574000 - 0xfffff000 (10796 kB)
[ 0.000000] pkmap : 0xff000000 - 0xff400000 (4096 kB)
[ 0.000000] vmalloc : 0xf77fe000 - 0xfeffe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf6ffe000 ( 879 MB)
[ 0.000000] .init : 0xc0c81000 - 0xc12b3000 (6344 kB)
[ 0.000000] .data : 0xc097f6f5 - 0xc0c80500 (3075 kB)
[ 0.000000] .text : 0xc0400000 - 0xc097f6f5 (5629 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304
[ 0.000000] CPU 0 irqstacks, hard=f3420000 soft=f3422000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1666.691 MHz processor.
[ 0.001006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3333.38 BogoMIPS (lpj=1666691)
[ 0.001260] pid_max: default: 32768 minimum: 301
[ 0.002281] Security Framework initialized
[ 0.002412] SELinux: Disabled at boot.
[ 0.002673] Mount-cache hash table entries: 512
[ 0.003865] Initializing cgroup subsys cpuacct
[ 0.004098] Initializing cgroup subsys memory
[ 0.004258] Initializing cgroup subsys devices
[ 0.004381] Initializing cgroup subsys freezer
[ 0.004505] Initializing cgroup subsys net_cls
[ 0.004627] Initializing cgroup subsys blkio
[ 0.004760] Initializing cgroup subsys perf_event
[ 0.005027] CPU: Physical Processor ID: 0
[ 0.005147] CPU: Processor Core ID: 0
[ 0.005269] mce: CPU supports 5 MCE banks
[ 0.005399] CPU0: Thermal monitoring enabled (TM1)
[ 0.005523] using mwait in idle threads.
[ 0.007150] ACPI: Core revision 20110413
[ 0.019112] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.019635] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.030092] CPU0: Intel(R) Atom(TM) CPU D510 @ 1.66GHz stepping 0a
[ 0.030997] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
[ 0.030997] ... version: 3
[ 0.030997] ... bit width: 40
[ 0.030997] ... generic registers: 2
[ 0.030997] ... value mask: 000000ffffffffff
[ 0.030997] ... max period: 000000007fffffff
[ 0.030997] ... fixed-purpose events: 3
[ 0.030997] ... event mask: 0000000700000003
[ 0.031691] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.032238] CPU 1 irqstacks, hard=f34f0000 soft=f34f2000
[ 0.032243] Booting Node 0, Processors #1
[ 0.032319] smpboot cpu 1: start_ip = 9a000
[ 0.001999] Initializing CPU#1
[ 0.104038] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.104520] CPU 2 irqstacks, hard=f34fe000 soft=f3500000
[ 0.104526] #2
[ 0.104565] smpboot cpu 2: start_ip = 9a000
[ 0.001999] Initializing CPU#2
[ 0.175981] TSC synchronization [CPU#0 -> CPU#2]:
[ 0.175981] Measured 50 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.175981] Marking TSC unstable due to check_tsc_sync_source failed
[ 0.176014] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.176359] CPU 3 irqstacks, hard=f3514000 soft=f3516000
[ 0.176990] #3 Ok.
[ 0.177102] smpboot cpu 3: start_ip = 9a000
[ 0.001999] Initializing CPU#3
[ 0.248137] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.248437] Brought up 4 CPUs
[ 0.248558] Total of 4 processors activated (13332.85 BogoMIPS).
[ 0.250327] devtmpfs: initialized
[ 0.251025] PM: Registering ACPI NVS region at cef48000 (487424 bytes)
[ 0.253831] atomic64 test passed for i386+ platform with CX8 and with SSE
[ 0.254025] Time: 19:04:17 Date: 04/22/14
[ 0.254368] NET: Registered protocol family 16
[ 0.254956] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.254979] ACPI: bus type pci registered
[ 0.255488] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.255707] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.255976] PCI: Using MMCONFIG for extended config space
[ 0.256102] PCI: Using configuration type 1 for base access
[ 0.259315] bio: create slab <bio-0> at 0
[ 0.262222] ACPI: EC: Look up EC in DSDT
[ 0.274041] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.276227] ACPI: Interpreter enabled
[ 0.276355] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.276654] ACPI: Using IOAPIC for interrupt routing
[ 0.287960] ACPI: No dock devices found.
[ 0.287974] HEST: Table not found.
[ 0.288096] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.288566] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.289351] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.289482] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.289613] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.289973] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xf7ffffff]
[ 0.290202] pci 0000:00:00.0: [8086:a000] type 0 class 0x000600
[ 0.290265] pci 0000:00:02.0: [8086:a001] type 0 class 0x000300
[ 0.290281] pci 0000:00:02.0: reg 10: [mem 0xe0a00000-0xe0a7ffff]
[ 0.290292] pci 0000:00:02.0: reg 14: [io 0x20c0-0x20c7]
[ 0.290302] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
[ 0.290313] pci 0000:00:02.0: reg 1c: [mem 0xe0900000-0xe09fffff]
[ 0.290407] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
[ 0.290517] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.290526] pci 0000:00:1c.0: PME# disabled
[ 0.290566] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
[ 0.290682] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.290690] pci 0000:00:1c.1: PME# disabled
[ 0.290727] pci 0000:00:1c.2: [8086:27d4] type 1 class 0x000604
[ 0.290839] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.290848] pci 0000:00:1c.2: PME# disabled
[ 0.290886] pci 0000:00:1c.3: [8086:27d6] type 1 class 0x000604
[ 0.291077] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.291085] pci 0000:00:1c.3: PME# disabled
[ 0.291126] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[ 0.291195] pci 0000:00:1d.0: reg 20: [io 0x2080-0x209f]
[ 0.291257] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[ 0.291338] pci 0000:00:1d.1: reg 20: [io 0x2060-0x207f]
[ 0.291402] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[ 0.291478] pci 0000:00:1d.2: reg 20: [io 0x2040-0x205f]
[ 0.291538] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[ 0.291609] pci 0000:00:1d.3: reg 20: [io 0x2020-0x203f]
[ 0.291680] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[ 0.291711] pci 0000:00:1d.7: reg 10: [mem 0xe0a80400-0xe0a807ff]
[ 0.291833] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.291842] pci 0000:00:1d.7: PME# disabled
[ 0.291874] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.291987] pci 0000:00:1f.0: [8086:27bc] type 0 class 0x000601
[ 0.292092] pci 0000:00:1f.0: [Firmware Bug]: TigerPoint LPC.BM_STS cleared
[ 0.292292] pci 0000:00:1f.2: [8086:27c0] type 0 class 0x000101
[ 0.292318] pci 0000:00:1f.2: reg 10: [io 0x20b8-0x20bf]
[ 0.292334] pci 0000:00:1f.2: reg 14: [io 0x20cc-0x20cf]
[ 0.292350] pci 0000:00:1f.2: reg 18: [io 0x20b0-0x20b7]
[ 0.292365] pci 0000:00:1f.2: reg 1c: [io 0x20c8-0x20cb]
[ 0.292381] pci 0000:00:1f.2: reg 20: [io 0x20a0-0x20af]
[ 0.292396] pci 0000:00:1f.2: reg 24: [mem 0xe0a80000-0xe0a803ff]
[ 0.292447] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.292456] pci 0000:00:1f.2: PME# disabled
[ 0.292480] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
[ 0.292551] pci 0000:00:1f.3: reg 20: [io 0x2000-0x201f]
[ 0.292694] pci 0000:01:00.0: [10ec:8168] type 0 class 0x000200
[ 0.292723] pci 0000:01:00.0: reg 10: [io 0x1000-0x10ff]
[ 0.292766] pci 0000:01:00.0: reg 18: [mem 0xe0804000-0xe0804fff 64bit pref]
[ 0.292796] pci 0000:01:00.0: reg 20: [mem 0xe0800000-0xe0803fff 64bit pref]
[ 0.292817] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[ 0.292915] pci 0000:01:00.0: supports D1 D2
[ 0.292921] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.292931] pci 0000:01:00.0: PME# disabled
[ 0.294998] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.295126] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.295137] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.295153] pci 0000:00:1c.0: bridge window [mem 0xe0800000-0xe08fffff 64bit pref]
[ 0.295221] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.295350] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
[ 0.295359] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.295371] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.295441] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[ 0.295567] pci 0000:00:1c.2: bridge window [io 0xf000-0x0000] (disabled)
[ 0.295577] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.295589] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.295656] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[ 0.295785] pci 0000:00:1c.3: bridge window [io 0xf000-0x0000] (disabled)
[ 0.295795] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.295807] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.295870] pci 0000:05:00.0: [8086:537c] type 1 class 0x000604
[ 0.296027] pci 0000:05:00.0: supports D1
[ 0.296102] pci 0000:00:1e.0: PCI bridge to [bus 05-06] (subtractive decode)
[ 0.296240] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.296250] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xe07fffff]
[ 0.296261] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.296269] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.296276] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.296283] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.296290] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xf7ffffff] (subtractive decode)
[ 0.296368] pci 0000:06:00.0: [100b:0035] type 0 class 0x000200
[ 0.296399] pci 0000:06:00.0: reg 10: [mem 0xe0600000-0xe07fffff]
[ 0.296497] pci 0000:06:00.0: reg 30: [mem 0xfff00000-0xffffffff pref]
[ 0.296540] pci 0000:06:01.0: [100b:0035] type 0 class 0x000200
[ 0.296569] pci 0000:06:01.0: reg 10: [mem 0xe0400000-0xe05fffff]
[ 0.296670] pci 0000:06:01.0: reg 30: [mem 0xfff00000-0xffffffff pref]
[ 0.296712] pci 0000:06:02.0: [100b:0035] type 0 class 0x000200
[ 0.296743] pci 0000:06:02.0: reg 10: [mem 0xe0200000-0xe03fffff]
[ 0.296842] pci 0000:06:02.0: reg 30: [mem 0xfff00000-0xffffffff pref]
[ 0.296883] pci 0000:06:03.0: [100b:0035] type 0 class 0x000200
[ 0.296913] pci 0000:06:03.0: reg 10: [mem 0xe0000000-0xe01fffff]
[ 0.297025] pci 0000:06:03.0: reg 30: [mem 0xfff00000-0xffffffff pref]
[ 0.297122] pci 0000:05:00.0: PCI bridge to [bus 06-06]
[ 0.297253] pci 0000:05:00.0: bridge window [io 0xfffff000-0x0000] (disabled)
[ 0.297263] pci 0000:05:00.0: bridge window [mem 0xe0000000-0xe07fffff]
[ 0.297276] pci 0000:05:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.297321] pci_bus 0000:00: on NUMA node 0
[ 0.297330] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.297647] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[ 0.298050] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.298178] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 0.298300] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[ 0.298420] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 0.298602] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.298733] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.298942] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.307686] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.308249] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.308928] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.309464] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.310045] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.310587] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 *9 10 11 12)
[ 0.311114] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.311659] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *9 10 11 12)
[ 0.312284] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.312519] vgaarb: loaded
[ 0.312635] vgaarb: bridge control possible 0000:00:02.0
[ 0.313092] SCSI subsystem initialized
[ 0.313271] libata version 3.00 loaded.
[ 0.313271] usbcore: registered new interface driver usbfs
[ 0.313304] usbcore: registered new interface driver hub
[ 0.313441] usbcore: registered new device driver usb
[ 0.314098] PCI: Using ACPI for IRQ routing
[ 0.316256] PCI: pci_cache_line_size set to 64 bytes
[ 0.316400] reserve RAM buffer: 000000000008f000 - 000000000008ffff
[ 0.316407] reserve RAM buffer: 000000000009ec00 - 000000000009ffff
[ 0.316413] reserve RAM buffer: 00000000cee98000 - 00000000cfffffff
[ 0.316421] reserve RAM buffer: 00000000cef48000 - 00000000cfffffff
[ 0.316427] reserve RAM buffer: 00000000ceff1000 - 00000000cfffffff
[ 0.316433] reserve RAM buffer: 00000000cf000000 - 00000000cfffffff
[ 0.316720] NetLabel: Initializing
[ 0.316841] NetLabel: domain hash size = 128
[ 0.316968] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.317111] NetLabel: unlabeled traffic allowed by default
[ 0.317248] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.317384] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.317619] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.320995] Switching to clocksource hpet
[ 0.321218] Switched to NOHz mode on CPU #2
[ 0.321546] Switched to NOHz mode on CPU #0
[ 0.321710] Switched to NOHz mode on CPU #1
[ 0.321717] Switched to NOHz mode on CPU #3
[ 0.340578] pnp: PnP ACPI init
[ 0.340731] ACPI: bus type pnp registered
[ 0.341197] pnp 00:00: [bus 00-3f]
[ 0.341205] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.341217] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.341223] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.341230] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.341236] pnp 00:00: [mem 0xd0000000-0xf7ffffff window]
[ 0.341346] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.341395] pnp 00:01: [mem 0xf8000000-0xfbffffff]
[ 0.341402] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[ 0.341408] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[ 0.341414] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[ 0.341420] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[ 0.341426] pnp 00:01: [mem 0x000c0000-0x000dffff]
[ 0.341432] pnp 00:01: [mem 0x000e0000-0x000fffff]
[ 0.341438] pnp 00:01: [mem 0xfff00000-0xffffffff]
[ 0.341549] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.341684] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.341815] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.341948] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.342104] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.342238] system 00:01: [mem 0x000c0000-0x000dffff] could not be reserved
[ 0.342373] system 00:01: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.342508] system 00:01: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.342638] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.342953] pnp 00:02: [io 0x0000-0x000f]
[ 0.342960] pnp 00:02: [io 0x0081-0x0083]
[ 0.342966] pnp 00:02: [io 0x0087]
[ 0.342971] pnp 00:02: [io 0x0089-0x008b]
[ 0.342977] pnp 00:02: [io 0x008f]
[ 0.342982] pnp 00:02: [io 0x00c0-0x00df]
[ 0.342988] pnp 00:02: [dma 4]
[ 0.343072] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.343100] pnp 00:03: [io 0x0070-0x0071]
[ 0.343106] pnp 00:03: [io 0x0074-0x0077]
[ 0.343124] pnp 00:03: [irq 8]
[ 0.343192] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.343223] pnp 00:04: [io 0x00f0]
[ 0.343235] pnp 00:04: [irq 13]
[ 0.343298] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.343328] pnp 00:05: [io 0x0061]
[ 0.343395] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.343426] pnp 00:06: [io 0x0500-0x053f]
[ 0.343432] pnp 00:06: [io 0x0400-0x047f]
[ 0.343437] pnp 00:06: [io 0x0092]
[ 0.343443] pnp 00:06: [io 0x0680-0x06ff]
[ 0.343448] pnp 00:06: [io 0x0010-0x001f]
[ 0.343454] pnp 00:06: [io 0x0072-0x0073]
[ 0.343459] pnp 00:06: [io 0x0080]
[ 0.343464] pnp 00:06: [io 0x0084-0x0086]
[ 0.343470] pnp 00:06: [io 0x0088]
[ 0.343475] pnp 00:06: [io 0x008c-0x008e]
[ 0.343481] pnp 00:06: [io 0x0090-0x009f]
[ 0.343486] pnp 00:06: [io 0x0295-0x0296]
[ 0.343595] system 00:06: [io 0x0500-0x053f] has been reserved
[ 0.343722] system 00:06: [io 0x0400-0x047f] has been reserved
[ 0.343850] system 00:06: [io 0x0680-0x06ff] has been reserved
[ 0.343977] system 00:06: [io 0x0295-0x0296] has been reserved
[ 0.344124] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.344247] pnp 00:07: [io 0x0060]
[ 0.344253] pnp 00:07: [io 0x0064]
[ 0.344265] pnp 00:07: [irq 1]
[ 0.344353] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.344905] pnp 00:08: [io 0x03f8-0x03ff]
[ 0.344918] pnp 00:08: [irq 4]
[ 0.345110] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.345431] pnp 00:09: [io 0x02f8-0x02ff]
[ 0.345444] pnp 00:09: [irq 3]
[ 0.345615] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.345674] pnp 00:0a: [mem 0xfec00000-0xfec000ff]
[ 0.345751] pnp 00:0a: Plug and Play ACPI device, IDs PNP0003 (active)
[ 0.345857] pnp 00:0b: [mem 0xfed00000-0xfed03fff]
[ 0.345937] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.345961] pnp: PnP ACPI: found 12 devices
[ 0.346102] ACPI: ACPI bus type pnp unregistered
[ 0.385245] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 0.385470] pci 0000:06:00.0: no compatible bridge window for [mem 0xfff00000-0xffffffff pref]
[ 0.385684] pci 0000:06:01.0: no compatible bridge window for [mem 0xfff00000-0xffffffff pref]
[ 0.385899] pci 0000:06:02.0: no compatible bridge window for [mem 0xfff00000-0xffffffff pref]
[ 0.386131] pci 0000:06:03.0: no compatible bridge window for [mem 0xfff00000-0xffffffff pref]
[ 0.386346] PCI: max bus depth: 2 pci_try_num: 3
[ 0.386431] pci 0000:00:1c.0: BAR 14: assigned [mem 0xe0b00000-0xe0bfffff]
[ 0.386567] pci 0000:00:1e.0: BAR 15: assigned [mem 0xe0c00000-0xe0ffffff pref]
[ 0.386779] pci 0000:00:1c.3: BAR 14: assigned [mem 0xe1000000-0xe11fffff]
[ 0.386914] pci 0000:00:1c.3: BAR 15: assigned [mem 0xe1200000-0xe13fffff 64bit pref]
[ 0.387148] pci 0000:00:1c.3: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.387283] pci 0000:00:1c.2: BAR 14: assigned [mem 0xe1400000-0xe15fffff]
[ 0.387421] pci 0000:00:1c.2: BAR 15: assigned [mem 0xe1600000-0xe17fffff 64bit pref]
[ 0.387637] pci 0000:00:1c.2: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.387769] pci 0000:00:1c.1: BAR 14: assigned [mem 0xe1800000-0xe19fffff]
[ 0.387906] pci 0000:00:1c.1: BAR 15: assigned [mem 0xe1a00000-0xe1bfffff 64bit pref]
[ 0.388132] pci 0000:00:1c.1: BAR 13: assigned [io 0x5000-0x5fff]
[ 0.388267] pci 0000:01:00.0: BAR 6: assigned [mem 0xe0820000-0xe083ffff pref]
[ 0.388477] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.388603] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.388735] pci 0000:00:1c.0: bridge window [mem 0xe0b00000-0xe0bfffff]
[ 0.388869] pci 0000:00:1c.0: bridge window [mem 0xe0800000-0xe08fffff 64bit pref]
[ 0.389101] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.389229] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
[ 0.389362] pci 0000:00:1c.1: bridge window [mem 0xe1800000-0xe19fffff]
[ 0.389498] pci 0000:00:1c.1: bridge window [mem 0xe1a00000-0xe1bfffff 64bit pref]
[ 0.389716] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[ 0.389844] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
[ 0.389978] pci 0000:00:1c.2: bridge window [mem 0xe1400000-0xe15fffff]
[ 0.390126] pci 0000:00:1c.2: bridge window [mem 0xe1600000-0xe17fffff 64bit pref]
[ 0.390346] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[ 0.390476] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.390609] pci 0000:00:1c.3: bridge window [mem 0xe1000000-0xe11fffff]
[ 0.390742] pci 0000:00:1c.3: bridge window [mem 0xe1200000-0xe13fffff 64bit pref]
[ 0.390964] pci 0000:05:00.0: BAR 15: assigned [mem 0xe0c00000-0xe0ffffff pref]
[ 0.391197] pci 0000:06:00.0: BAR 6: assigned [mem 0xe0c00000-0xe0cfffff pref]
[ 0.391410] pci 0000:06:01.0: BAR 6: assigned [mem 0xe0d00000-0xe0dfffff pref]
[ 0.391622] pci 0000:06:02.0: BAR 6: assigned [mem 0xe0e00000-0xe0efffff pref]
[ 0.391835] pci 0000:06:03.0: BAR 6: assigned [mem 0xe0f00000-0xe0ffffff pref]
[ 0.392063] pci 0000:05:00.0: PCI bridge to [bus 06-06]
[ 0.392190] pci 0000:05:00.0: bridge window [io disabled]
[ 0.392323] pci 0000:05:00.0: bridge window [mem 0xe0000000-0xe07fffff]
[ 0.392460] pci 0000:05:00.0: bridge window [mem 0xe0c00000-0xe0ffffff pref]
[ 0.392676] pci 0000:00:1e.0: PCI bridge to [bus 05-06]
[ 0.392800] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.392932] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xe07fffff]
[ 0.393081] pci 0000:00:1e.0: bridge window [mem 0xe0c00000-0xe0ffffff pref]
[ 0.393322] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.393459] pci 0000:00:1c.0: setting latency timer to 64
[ 0.393471] pci 0000:00:1c.1: enabling device (0000 -> 0003)
[ 0.393606] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.393740] pci 0000:00:1c.1: setting latency timer to 64
[ 0.393752] pci 0000:00:1c.2: enabling device (0000 -> 0003)
[ 0.393888] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.394039] pci 0000:00:1c.2: setting latency timer to 64
[ 0.394051] pci 0000:00:1c.3: enabling device (0000 -> 0003)
[ 0.394185] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.394320] pci 0000:00:1c.3: setting latency timer to 64
[ 0.394333] pci 0000:00:1e.0: setting latency timer to 64
[ 0.394350] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.394356] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.394363] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.394369] pci_bus 0000:00: resource 7 [mem 0xd0000000-0xf7ffffff]
[ 0.394376] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 0.394382] pci_bus 0000:01: resource 1 [mem 0xe0b00000-0xe0bfffff]
[ 0.394390] pci_bus 0000:01: resource 2 [mem 0xe0800000-0xe08fffff 64bit pref]
[ 0.394397] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff]
[ 0.394403] pci_bus 0000:02: resource 1 [mem 0xe1800000-0xe19fffff]
[ 0.394410] pci_bus 0000:02: resource 2 [mem 0xe1a00000-0xe1bfffff 64bit pref]
[ 0.394417] pci_bus 0000:03: resource 0 [io 0x4000-0x4fff]
[ 0.394424] pci_bus 0000:03: resource 1 [mem 0xe1400000-0xe15fffff]
[ 0.394431] pci_bus 0000:03: resource 2 [mem 0xe1600000-0xe17fffff 64bit pref]
[ 0.394438] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
[ 0.394444] pci_bus 0000:04: resource 1 [mem 0xe1000000-0xe11fffff]
[ 0.394451] pci_bus 0000:04: resource 2 [mem 0xe1200000-0xe13fffff 64bit pref]
[ 0.394458] pci_bus 0000:05: resource 1 [mem 0xe0000000-0xe07fffff]
[ 0.394465] pci_bus 0000:05: resource 2 [mem 0xe0c00000-0xe0ffffff pref]
[ 0.394472] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.394478] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.394485] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.394492] pci_bus 0000:05: resource 7 [mem 0xd0000000-0xf7ffffff]
[ 0.394499] pci_bus 0000:06: resource 1 [mem 0xe0000000-0xe07fffff]
[ 0.394505] pci_bus 0000:06: resource 2 [mem 0xe0c00000-0xe0ffffff pref]
[ 0.394684] NET: Registered protocol family 2
[ 0.394993] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.395512] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.396700] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.397305] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.397443] TCP reno registered
[ 0.397570] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.397710] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.398484] NET: Registered protocol family 1
[ 0.398897] RPC: Registered named UNIX socket transport module.
[ 0.399054] RPC: Registered udp transport module.
[ 0.399178] RPC: Registered tcp transport module.
[ 0.399302] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.399448] pci 0000:00:02.0: Boot video device
[ 0.399496] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.399645] pci 0000:00:1d.0: PCI INT A disabled
[ 0.399775] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.399921] pci 0000:00:1d.1: PCI INT B disabled
[ 0.400070] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.400217] pci 0000:00:1d.2: PCI INT C disabled
[ 0.400347] pci 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.400492] pci 0000:00:1d.3: PCI INT D disabled
[ 0.400615] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.415051] pci 0000:00:1d.7: PCI INT A disabled
[ 0.415210] PCI: CLS 64 bytes, default 64
[ 1.627249] Trying to unpack rootfs image as initramfs...
[ 3.707024] Freeing initrd memory: 8540k freed
[ 3.714818] apm: BIOS not found.
[ 3.715165] Intel AES-NI instructions are not detected.
[ 3.715663] audit: initializing netlink socket (disabled)
[ 3.715804] type=2000 audit(1398193460.714:1): initialized
[ 3.784378] highmem bounce pool size: 64 pages
[ 3.784501] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 3.803503] VFS: Disk quotas dquot_6.5.2
[ 3.803988] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 3.805960] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 3.807116] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 3.807241] NTFS driver 2.1.30 [Flags: R/O].
[ 3.807706] fuse init (API version 7.16)
[ 3.808434] JFS: nTxBlock = 8192, nTxLock = 65536
[ 3.812478] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 3.814371] SGI XFS Quota Management subsystem
[ 3.815198] Btrfs loaded
[ 3.815717] aufs 3.0-20120402
[ 3.815832] msgmni has been set to 1648
[ 3.816934] alg: No test for stdrng (krng)
[ 3.819199] NET: Registered protocol family 38
[ 3.819386] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 3.819693] io scheduler noop registered
[ 3.819808] io scheduler deadline registered
[ 3.819971] io scheduler cfq registered (default)
[ 3.820327] pcieport 0000:00:1c.0: setting latency timer to 64
[ 3.820398] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 3.820518] pcieport 0000:00:1c.1: setting latency timer to 64
[ 3.820580] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 3.820689] pcieport 0000:00:1c.2: setting latency timer to 64
[ 3.820750] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 3.820864] pcieport 0000:00:1c.3: setting latency timer to 64
[ 3.820925] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[ 3.821130] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.821332] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 3.821451] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 3.822154] intel_idle: MWAIT substates: 0x10
[ 3.822179] intel_idle: v0.4 model 0x1C
[ 3.822184] intel_idle: lapic_timer_reliable_states 0x2
[ 3.822428] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
[ 3.822632] ACPI: Sleep Button [SLPB]
[ 3.822879] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 3.823104] ACPI: Power Button [PWRF]
[ 3.823478] ACPI: acpi_idle yielding to intel_idle
[ 3.827263] ERST: Table is not found!
[ 3.827460] isapnp: Scanning for PnP cards...
[ 4.184128] isapnp: No Plug & Play device found
[ 4.184418] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 4.205263] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 4.234694] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 4.307740] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 4.328829] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 4.329711] Non-volatile memory driver v1.3
[ 4.329827] Linux agpgart interface v0.103
[ 4.330212] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
[ 4.330638] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 4.331253] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 4.331602] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 4.336236] brd: module loaded
[ 4.337724] loop: AES key scrubbing enabled
[ 4.337837] loop: loaded (max 8 devices)
[ 4.338210] ata_piix 0000:00:1f.2: version 2.13
[ 4.338237] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 4.338363] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 4.489080] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 4.489776] scsi0 : ata_piix
[ 4.490166] scsi1 : ata_piix
[ 4.490649] ata1: SATA max UDMA/133 cmd 0x20b8 ctl 0x20cc bmdma 0x20a0 irq 19
[ 4.490772] ata2: SATA max UDMA/133 cmd 0x20b0 ctl 0x20c8 bmdma 0x20a8 irq 19
[ 4.491093] Fixed MDIO Bus: probed
[ 4.491393] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.491550] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 4.491700] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 4.491708] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 4.491937] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 4.492194] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 4.492325] ehci_hcd 0000:00:1d.7: debug port 1
[ 4.496312] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 4.496347] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe0a80400
[ 4.506039] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 4.506219] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.506340] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.506533] usb usb1: Product: EHCI Host Controller
[ 4.506646] usb usb1: Manufacturer: Linux 3.0.29-std260-i586 ehci_hcd
[ 4.506764] usb usb1: SerialNumber: 0000:00:1d.7
[ 4.507144] hub 1-0:1.0: USB hub found
[ 4.507262] hub 1-0:1.0: 8 ports detected
[ 4.507557] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.507701] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.507892] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 4.508050] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 4.508057] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 4.508278] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 4.508508] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00002080
[ 4.508698] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.508818] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.509032] usb usb2: Product: UHCI Host Controller
[ 4.509147] usb usb2: Manufacturer: Linux 3.0.29-std260-i586 uhci_hcd
[ 4.509263] usb usb2: SerialNumber: 0000:00:1d.0
[ 4.509601] hub 2-0:1.0: USB hub found
[ 4.509717] hub 2-0:1.0: 2 ports detected
[ 4.509973] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 4.510123] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 4.510130] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 4.510335] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 4.510559] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002060
[ 4.510747] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.510867] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.511082] usb usb3: Product: UHCI Host Controller
[ 4.511196] usb usb3: Manufacturer: Linux 3.0.29-std260-i586 uhci_hcd
[ 4.511314] usb usb3: SerialNumber: 0000:00:1d.1
[ 4.511646] hub 3-0:1.0: USB hub found
[ 4.511763] hub 3-0:1.0: 2 ports detected
[ 4.512036] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 4.512167] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 4.512174] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 4.512387] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 4.512647] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040
[ 4.512836] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.512957] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.513171] usb usb4: Product: UHCI Host Controller
[ 4.513285] usb usb4: Manufacturer: Linux 3.0.29-std260-i586 uhci_hcd
[ 4.513403] usb usb4: SerialNumber: 0000:00:1d.2
[ 4.513737] hub 4-0:1.0: USB hub found
[ 4.513854] hub 4-0:1.0: 2 ports detected
[ 4.514127] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 4.514259] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 4.514266] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 4.514473] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 4.514719] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00002020
[ 4.514905] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.515051] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.515245] usb usb5: Product: UHCI Host Controller
[ 4.515358] usb usb5: Manufacturer: Linux 3.0.29-std260-i586 uhci_hcd
[ 4.515476] usb usb5: SerialNumber: 0000:00:1d.3
[ 4.515816] hub 5-0:1.0: USB hub found
[ 4.515933] hub 5-0:1.0: 2 ports detected
[ 4.516282] usbcore: registered new interface driver usbserial
[ 4.516417] USB Serial support registered for generic
[ 4.516557] usbcore: registered new interface driver usbserial_generic
[ 4.516675] usbserial: USB Serial Driver core
[ 4.516882] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 4.517021] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 4.517776] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.518035] mousedev: PS/2 mouse device common for all mice
[ 4.518501] rtc_cmos 00:03: RTC can wake from S4
[ 4.518792] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 4.518947] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 4.519375] device-mapper: uevent: version 1.0.3
[ 4.519698] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel at redhat.com
[ 4.520248] cpuidle: using governor ladder
[ 4.520595] cpuidle: using governor menu
[ 4.521145] EFI Variables Facility v0.08 2004-May-17
[ 4.521672] usbcore: registered new interface driver usbhid
[ 4.521788] usbhid: USB HID core driver
[ 4.522102] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.522242] TCP cubic registered
[ 4.522350] Initializing XFRM netlink socket
[ 4.522472] NET: Registered protocol family 17
[ 4.522633] Registering the dns_resolver key type
[ 4.522775] Using IPI No-Shortcut mode
[ 4.523148] PM: Hibernation image not present or could not be loaded.
[ 4.523171] registered taskstats version 1
[ 4.530282] IMA: No TPM chip found, activating TPM-bypass!
[ 4.531064] Magic number: 10:170:92
[ 4.531317] rtc_cmos 00:03: setting system clock to 2014-04-22 19:04:22 UTC (1398193462)
[ 4.531661] Initializing network drop monitor service
[ 4.548953] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 4.653629] ata1.00: ATA-7: WDC WD800JD-75MSA3, 10.01E04, max UDMA/133
[ 4.653756] ata1.00: 156250000 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 4.657368] ata1.00: configured for UDMA/133
[ 4.657739] scsi 0:0:0:0: Direct-Access ATA WDC WD800JD-75MS 10.0 PQ: 0 ANSI: 5
[ 4.658375] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.658399] sd 0:0:0:0: [sda] 156250000 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 4.658602] sd 0:0:0:0: [sda] Write Protect is off
[ 4.658610] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.658696] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.683022] sda: sda1 sda2
[ 4.683025] sda1: <bsd: sda5 sda6 >
[ 4.683027] sda2: <bsd:bad subpartition - ignored
[ 4.683030] bad subpartition - ignored
[ 4.683032] >
[ 4.684509] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.684700] Freeing unused kernel memory: 6344k freed
[ 4.689684] Write protecting the kernel text: 5632k
[ 4.689884] Write protecting the kernel read-only data: 2364k
[ 4.809062] usb 1-7: new high speed USB device number 2 using ehci_hcd
[ 4.926144] usb 1-7: New USB device found, idVendor=0951, idProduct=1603
[ 4.926151] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.926158] usb 1-7: Product: DataTraveler 2.0
[ 4.926163] usb 1-7: Manufacturer: Kingston
[ 4.926168] usb 1-7: SerialNumber: 0019E0009E7E5A8A11160136
[ 5.368796] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 5.368845] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.368924] r8169 0000:01:00.0: setting latency timer to 64
[ 5.369112] r8169 0000:01:00.0: irq 44 for MSI/MSI-X
[ 5.369455] r8169 0000:01:00.0: eth0: RTL8168d/8111d at 0xf7dc0000, 00:27:0e:07:48:a0, XID 081000c0 IRQ 44
[ 5.377715] [drm] Initialized drm 1.1.0 20060810
[ 5.393678] Initializing USB Mass Storage driver...
[ 5.399933] cassini: cassini.c:v1.6 (21 May 2008)
[ 5.399952] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.399962] cassini 0000:06:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 5.399972] i915 0000:00:02.0: setting latency timer to 64
[ 5.401585] scsi2 : usb-storage 1-7:1.0
[ 5.401820] usbcore: registered new interface driver usb-storage
[ 5.401827] USB Mass Storage support registered.
[ 5.488111] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[ 5.488128] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 5.488135] [drm] Driver supports precise vblank timestamp query.
[ 5.488245] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 5.564824] cassini 0000:06:00.0: eth1: Sun Cassini+ (64bit/66MHz PCI/Cu) Ethernet[21] 00:03:ba:ff:74:49
[ 5.651392] cassini 0000:06:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 5.662203] cassini 0000:06:01.0: eth2: Sun Cassini+ (64bit/66MHz PCI/Cu) Ethernet[22] 00:03:ba:ff:74:4a
[ 5.669067] [drm] initialized overlay support
[ 5.748909] cassini 0000:06:02.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 5.749853] fbcon: inteldrmfb (fb0) is primary device
[ 5.759142] cassini 0000:06:02.0: eth3: Sun Cassini+ (64bit/66MHz PCI/Cu) Ethernet[23] 00:03:ba:ff:74:4b
[ 5.789852] [drm] Changing LVDS panel from (+hsync, +vsync) to (-hsync, -vsync)
[ 5.826588] fixme: max PWM is zero.
[ 5.839980] Console: switching to colour frame buffer device 160x50
[ 5.844510] cassini 0000:06:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 5.853678] fb0: inteldrmfb frame buffer device
[ 5.853686] drm: registered panic notifier
[ 5.853717] No ACPI video bus found
[ 5.853839] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 5.855404] cassini 0000:06:03.0: eth4: Sun Cassini+ (64bit/66MHz PCI/Cu) Ethernet[20] 00:03:ba:ff:74:4c
[ 6.405083] scsi 2:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2
[ 6.407185] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 6.408114] sd 2:0:0:0: [sdb] 15679488 512-byte logical blocks: (8.02 GB/7.47 GiB)
[ 6.408808] sd 2:0:0:0: [sdb] Write Protect is off
[ 6.408820] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 6.409559] sd 2:0:0:0: [sdb] No Caching mode page present
[ 6.409569] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 6.413124] sd 2:0:0:0: [sdb] No Caching mode page present
[ 6.413133] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 6.413968] sdb: sdb1
[ 6.416447] sd 2:0:0:0: [sdb] No Caching mode page present
[ 6.416455] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 6.416463] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 17.106534] md: linear personality registered for level -1
[ 17.109877] md: multipath personality registered for level -4
[ 17.113365] md: raid0 personality registered for level 0
[ 17.117363] md: raid1 personality registered for level 1
[ 17.120712] async_tx: api initialized (async)
[ 17.122097] xor: automatically using best checksumming function: pIII_sse
[ 17.127029] pIII_sse : 4948.000 MB/sec
[ 17.127037] xor: using function: pIII_sse (4948.000 MB/sec)
[ 17.146276] raid6: int32x1 183 MB/s
[ 17.163058] raid6: int32x2 261 MB/s
[ 17.180112] raid6: int32x4 277 MB/s
[ 17.197109] raid6: int32x8 281 MB/s
[ 17.214184] raid6: mmxx1 367 MB/s
[ 17.231095] raid6: mmxx2 671 MB/s
[ 17.248196] raid6: sse1x1 285 MB/s
[ 17.265037] raid6: sse1x2 480 MB/s
[ 17.282134] raid6: sse2x1 558 MB/s
[ 17.299083] raid6: sse2x2 953 MB/s
[ 17.299088] raid6: using algorithm sse2x2 (953 MB/s)
[ 17.302906] md: raid6 personality registered for level 6
[ 17.302915] md: raid5 personality registered for level 5
[ 17.302921] md: raid4 personality registered for level 4
[ 17.313967] md: raid10 personality registered for level 10
[ 17.323362] mdadm: sending ioctl 1261 to a partition!
[ 17.323370] mdadm: sending ioctl 1261 to a partition!
[ 17.324564] mdadm: sending ioctl 1261 to a partition!
[ 17.324571] mdadm: sending ioctl 1261 to a partition!
[ 17.325080] mdadm: sending ioctl 1261 to a partition!
[ 17.325087] mdadm: sending ioctl 1261 to a partition!
[ 17.325807] mdadm: sending ioctl 1261 to a partition!
[ 17.325813] mdadm: sending ioctl 1261 to a partition!
[ 17.326452] mdadm: sending ioctl 800c0910 to a partition!
[ 17.326459] mdadm: sending ioctl 800c0910 to a partition!
[ 17.557735] UDF-fs: No partition found (1)
[ 17.847665] UDF-fs: No partition found (1)
[ 18.153634] UDF-fs: No partition found (1)
[ 18.334682] UDF-fs: No partition found (1)
[ 18.516937] UDF-fs: No partition found (1)
[ 19.059666] UDF-fs: No partition found (1)
[ 19.493082] aufs test_add:261:mount[459]: uid/gid/perm /squashfs 0/0/0755, 0/0/01777
[ 19.501237] aufs test_add:261:mount[464]: uid/gid/perm /boot 0/0/0755, 0/0/01777
[ 23.246389] udevd[829]: starting version 171
[ 23.326850] udevd[829]: converting old udev database
[ 23.741891] iTCO_vendor_support: vendor-support=0
[ 23.768399] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 23.772115] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 23.772308] iTCO_wdt: Found a NM10 TCO device (Version=2, TCOBASE=0x0460)
[ 23.772502] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 29.857896] r8169 0000:01:00.0: eth0: link down
[ 31.729981] NET: Registered protocol family 10
[ 31.730851] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 31.730957] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 31.731106] ADDRCONF(NETDEV_UP): eth2: link is not ready
[ 31.731205] ADDRCONF(NETDEV_UP): eth3: link is not ready
[ 31.731320] ADDRCONF(NETDEV_UP): eth4: link is not ready
[ 31.767765] sshd (1284): /proc/1284/oom_adj is deprecated, please use /proc/1284/oom_score_adj instead.
[ 33.887037] md: Autodetecting RAID arrays.
[ 33.887045] md: Scanned 0 and added 0 devices.
[ 33.887049] md: autorun ...
[ 33.887053] md: ... autorun DONE.
[ 82.928569] cassini 0000:06:00.0: eth1: Got link after fallback, retrying autoneg once...
[ 85.136461] cassini 0000:06:00.0: eth1: Link up at 100 Mbps, full-duplex
[ 85.136472] cassini 0000:06:00.0: eth1: Pause is enabled (rxfifo: 16384 off: 13312 on: 11776)
[ 85.136866] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 95.666171] eth1: no IPv6 routers present
[ 107.186363] cassini 0000:06:00.0: eth1: Link down
[ 107.186372] cassini 0000:06:00.0: eth1: reset called in cas_abnormal_irq [0x121000]
[ 111.920247] cassini 0000:06:03.0: eth4: Got link after fallback, retrying autoneg once...
[ 114.128324] cassini 0000:06:03.0: eth4: Link up at 100 Mbps, full-duplex
[ 114.128336] cassini 0000:06:03.0: eth4: Pause is enabled (rxfifo: 16384 off: 13312 on: 11776)
[ 114.128724] ADDRCONF(NETDEV_CHANGE): eth4: link becomes ready
[ 124.370024] eth4: no IPv6 routers present
[ 124.864231] cassini 0000:06:03.0: eth4: Link down
[ 124.864240] cassini 0000:06:03.0: eth4: reset called in cas_abnormal_irq [0x121000]
[ 127.445705] r8169 0000:01:00.0: eth0: link up
[ 127.446090] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 137.794181] eth0: no IPv6 routers present
[ 1233.745771] r8169 0000:01:00.0: eth0: link down
[ 1237.680466] cassini 0000:06:00.0: eth1: Got link after fallback, retrying autoneg once...
[ 1239.888561] cassini 0000:06:00.0: eth1: Link up at 100 Mbps, full-duplex
[ 1239.888574] cassini 0000:06:00.0: eth1: Pause is enabled (rxfifo: 16384 off: 13312 on: 11776)
[ 1240.291548] cassini 0000:06:00.0: eth1: Link down
[ 1240.291558] cassini 0000:06:00.0: eth1: reset called in cas_abnormal_irq [0x21000]
[ 1246.976469] cassini 0000:06:00.0: eth1: Link up at 100 Mbps, full-duplex
[ 1246.976481] cassini 0000:06:00.0: eth1: Pause is enabled (rxfifo: 16384 off: 13312 on: 11776)
********************************* /proc/interrupts *********************************
root at sysresccd /root % cat /proc/interrupts
CPU0 CPU1 CPU2 CPU3
0: 132 4 1 1 IO-APIC-edge timer
1: 39 38 40 46 IO-APIC-edge i8042
8: 1 2 3 2 IO-APIC-edge rtc0
9: 0 0 0 0 IO-APIC-fasteoi acpi
16: 0 0 0 0 IO-APIC-fasteoi uhci_hcd:usb5
18: 0 0 0 0 IO-APIC-fasteoi uhci_hcd:usb4
19: 430 452 430 450 IO-APIC-fasteoi ata_piix, uhci_hcd:usb3
20: 55 55 54 54 IO-APIC-fasteoi eth4
21: 3570 3572 3566 3561 IO-APIC-fasteoi eth1
22: 0 0 0 0 IO-APIC-fasteoi eth2
23: 1933 1907 1932 1913 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb2, eth3
44: 6826 6824 6828 6827 PCI-MSI-edge eth0
45: 0 0 0 0 PCI-MSI-edge i915
NMI: 12 12 17 17 Non-maskable interrupts
LOC: 27918 17228 20159 18437 Local timer interrupts
SPU: 0 0 0 0 Spurious interrupts
PMI: 12 12 17 17 Performance monitoring interrupts
IWI: 0 0 0 0 IRQ work interrupts
RES: 11599 11740 11813 11722 Rescheduling interrupts
CAL: 1268 258 1135 264 Function call interrupts
TLB: 230 708 242 737 TLB shootdowns
TRM: 0 0 0 0 Thermal event interrupts
THR: 0 0 0 0 Threshold APIC interrupts
MCE: 0 0 0 0 Machine check exceptions
MCP: 6 6 6 6 Machine check polls
ERR: 0
MIS: 0
>Release-Note:
>Audit-Trail:
>Unformatted:
More information about the freebsd-bugs
mailing list