kern/188897: dc ethernet driver seems to prevent the detection of other Nic chipsets
Clif Cox
clif at eugeneweb.com
Tue Apr 22 18:50:05 UTC 2014
>Number: 188897
>Category: kern
>Synopsis: dc ethernet driver seems to prevent the detection of other Nic chipsets
>Confidential: no
>Severity: non-critical
>Priority: low
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Tue Apr 22 18:50:04 UTC 2014
>Closed-Date:
>Last-Modified:
>Originator: Clif Cox
>Release: 10.0-RELEASE FreeBSD
>Organization:
>Environment:
FreeBSD BSD10 10.0-RELEASE FreeBSD 10.0-RELEASE #0 r260789: Fri Jan 17 01:46:25 UTC 2014 root at snap.freebsd.org:/usr/obj/usr/src/sys/GENERIC i386
>Description:
Hello,
Not sure if this should be a follow up to problem report 179033 or not, but the patch to the dc driver seems to prevent the detection of other Nics when there are dc boards in the system. Test setup is exactly the same as in 179033. The behavior under Linux would also be the same. Under BSD, when there are dc cards in the system it rarely detects the native re nic on the mother board when booting. When it is detected it often crashes at the instant it prints the nic information line, though that is hard to reproduce. I have attached some diagnostic output of dmesg, ifconfig, and others, both with and without the dc quadport cards.
>How-To-Repeat:
Boot the Atom D510MO Board with dc chipset quad port card(s) as in PR 179033
>Fix:
Probably something in the patch submitted for PR 179033 is preventing the detection of the re hardware, it was always detected before.
Patch attached with submission follows:
***************************************************************************
Atom D510MO Board without DC quad port cards
********************************* IFCONFIG *********************************
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
ether 00:27:0e:07:48:a0
inet 192.168.1.13 netmask 0xffffff00 broadcast 192.168.1.255
inet 192.168.0.187 netmask 0xffffff00 broadcast 192.168.0.255
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
inet 127.0.0.1 netmask 0xff000000
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
********************************* DMESG *********************************
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.0-RELEASE #0 r260789: Fri Jan 17 01:46:25 UTC 2014
root at snap.freebsd.org:/usr/obj/usr/src/sys/GENERIC i386
FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610
CPU: Intel(R) Atom(TM) CPU D510 @ 1.66GHz (1666.73-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x106ca Family = 0x6 Model = 0x1c Stepping = 10
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x40e31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant, performance statistics
real memory = 4294967296 (4096 MB)
avail memory = 3388112896 (3231 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <INTEL MOPNV10N>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 HTT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP/HT): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP/HT): APIC ID: 3
ioapic0: Changing APIC ID to 8
ioapic0 <Version 2.0> irqs 0-23 on motherboard
lapic0: Forcing LINT1 to edge trigger
kbd1 at kbdmux0
random: <Software, Yarrow> initialized
acpi0: <INTEL MOPNV10N> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed03fff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x20c0-0x20c7 mem 0xe0200000-0xe027ffff,0xd0000000-0xdfffffff,0xe0100000-0xe01fffff irq 16 at device 2.0 on pci0
agp0: <Intel Pineview SVGA controller> on vgapci0
agp0: aperture size is 256M, detected 8188k stolen memory
vgapci0: Boot video device
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pcib1: failed to allocate initial prefetch window: 0xe0000000-0xe00fffff
pci1: <ACPI PCI bus> on pcib1
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x1000-0x10ff irq 16 at device 0.0 on pci1
re0: Using 1 MSI-X message
re0: Chip rev. 0x28000000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Ethernet address: 00:27:0e:07:48:a0
pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pci4: <ACPI PCI bus> on pcib4
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0x2080-0x209f irq 23 at device 29.0 on pci0
uhci0: LegSup = 0x2f00
usbus0 on uhci0
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0x2060-0x207f irq 19 at device 29.1 on pci0
uhci1: LegSup = 0x2f00
usbus1 on uhci1
uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0x2040-0x205f irq 18 at device 29.2 on pci0
uhci2: LegSup = 0x2f00
usbus2 on uhci2
uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0x2020-0x203f irq 16 at device 29.3 on pci0
uhci3: LegSup = 0x2f00
usbus3 on uhci3
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xe0280400-0xe02807ff irq 23 at device 29.7 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci0
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib5
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 SATA300 controller> port 0x20b8-0x20bf,0x20cc-0x20cf,0x20b0-0x20b7,0x20c8-0x20cb,0x20a0-0x20af mem 0xe0280000-0xe02803ff irq 19 at device 31.2 on pci0
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ata0: <ATA channel> at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1: <ATA channel> at port 0x170-0x177,0x376 irq 15 on isa0
ppc0: parallel port not found.
p4tcc0: <CPU Frequency Thermal Control> on cpu0
p4tcc1: <CPU Frequency Thermal Control> on cpu1
p4tcc2: <CPU Frequency Thermal Control> on cpu2
p4tcc3: <CPU Frequency Thermal Control> on cpu3
Timecounters tick every 1.000 msec
random: unblocking device.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
usbus4: 480Mbps High Speed USB v2.0
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
ada0 at ata2 bus 0 scbus0 target 0 lun 0
ada0: <WDC WD800JD-75MSA3 10.01E04> ATA-7 SATA 2.x device
ada0: Serial Number WD-WMAM9ZL59310
ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada0: 76293MB (156250000 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
lapic1: Forcing LINT1 to edge trigger
SMP: AP CPU #1 Launched!
lapic2: Forcing LINT1 to edge trigger
SMP: AP CPU #2 Launched!
lapic3: Forcing LINT1 to edge trigger
SMP: AP CPU #3 Launched!
Timecounter "TSC" frequency 1666726490 Hz quality 1000
Root mount waiting for: usbus4
Root mount waiting for: usbus4
uhub4: 8 ports with 8 removable, self powered
Trying to mount root from ufs:/dev/ada0s2a [rw]...
********************************* DEVINFO *********************************
nexus0
npx0
apic0
ram0
acpi0
cpu0
p4tcc0
cpufreq0
cpu1
p4tcc1
cpufreq1
cpu2
p4tcc2
cpufreq2
cpu3
p4tcc3
cpufreq3
acpi_button0
pcib0
pci0
hostb0
vgapci0
agp0
pcib1
pci1
re0
miibus0
rgephy0
pcib2
pci2
pcib3
pci3
pcib4
pci4
uhci0
usbus0
uhub0
uhci1
usbus1
uhub1
uhci2
usbus2
uhub2
uhci3
usbus3
uhub3
ehci0
usbus4
uhub4
pcib5
pci5
isab0
isa0
pmtimer0
sc0
vga0
ata0
ata1
atapci0
ata2
ata3
acpi_sysresource0
pci_link0
pci_link1
pci_link2
pci_link3
pci_link4
pci_link5
pci_link6
pci_link7
atdma0
atrtc0
atpic0
npxisa0
attimer0
acpi_sysresource1
atkbdc0
atkbd0
uart0
uart1
hpet0
acpi_timer0
********************************* VMSTAT *********************************
interrupt total rate
irq1: atkbd0 700 0
irq4: uart0 561 0
irq19: uhci1+ 1794 0
irq20: hpet0 102232 34
irq256: re0 122474 40
Total 227761 75
***************************************************************************
Atom D510MO Board with DC quad port cards
********************************* IFCONFIG *********************************
dc0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=80008<VLAN_MTU,LINKSTATE>
ether 00:30:6e:2d:7f:44
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (none)
status: no carrier
dc1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=80008<VLAN_MTU,LINKSTATE>
ether 00:30:6e:2d:7f:45
inet 192.168.0.188 netmask 0xffffff00 broadcast 192.168.0.255
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
dc2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=80008<VLAN_MTU,LINKSTATE>
ether 00:30:6e:2d:7f:46
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (none)
status: no carrier
dc3: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=80008<VLAN_MTU,LINKSTATE>
ether 00:30:6e:2d:7f:47
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (none)
status: no carrier
dc4: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=80008<VLAN_MTU,LINKSTATE>
ether 00:80:c8:b9:19:49
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (none)
status: no carrier
dc5: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=80008<VLAN_MTU,LINKSTATE>
ether 00:80:c8:b9:19:4a
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (none)
status: no carrier
dc6: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=80008<VLAN_MTU,LINKSTATE>
ether 00:80:c8:b9:19:4b
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (none)
status: no carrier
dc7: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=80008<VLAN_MTU,LINKSTATE>
ether 00:80:c8:b9:19:4c
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (none)
status: no carrier
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x9
inet 127.0.0.1 netmask 0xff000000
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
********************************* DMESG *********************************
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.0-RELEASE #0 r260789: Fri Jan 17 01:46:25 UTC 2014
root at snap.freebsd.org:/usr/obj/usr/src/sys/GENERIC i386
FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610
CPU: Intel(R) Atom(TM) CPU D510 @ 1.66GHz (1666.72-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x106ca Family = 0x6 Model = 0x1c Stepping = 10
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x40e31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant, performance statistics
real memory = 4294967296 (4096 MB)
avail memory = 3388112896 (3231 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <INTEL MOPNV10N>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 HTT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP/HT): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP/HT): APIC ID: 3
ioapic0: Changing APIC ID to 8
ioapic0 <Version 2.0> irqs 0-23 on motherboard
lapic0: Forcing LINT1 to edge trigger
kbd1 at kbdmux0
random: <Software, Yarrow> initialized
acpi0: <INTEL MOPNV10N> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed03fff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x40c0-0x40c7 mem 0xe0400000-0xe047ffff,0xd0000000-0xdfffffff,0xe0300000-0xe03fffff irq 16 at device 2.0 on pci0
agp0: <Intel Pineview SVGA controller> on vgapci0
agp0: aperture size is 256M, detected 8188k stolen memory
vgapci0: Boot video device
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pcib1: failed to allocate initial prefetch window: 0xe0000000-0xe00fffff
pci1: <ACPI PCI bus> on pcib1
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff irq 16 at device 0.0 on pci1
re0: Using 1 MSI-X message
re0: Chip rev. 0x60000000
re0: MAC rev. 0x00000000
re0: attaching PHYs failed
device_attach: re0 attach returned 6
pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pci4: <ACPI PCI bus> on pcib4
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0x4080-0x409f irq 23 at device 29.0 on pci0
uhci0: LegSup = 0x2f00
usbus0 on uhci0
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0x4060-0x407f irq 19 at device 29.1 on pci0
uhci1: LegSup = 0x2f00
usbus1 on uhci1
uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0x4040-0x405f irq 18 at device 29.2 on pci0
uhci2: LegSup = 0x2f00
usbus2 on uhci2
uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0x4020-0x403f irq 16 at device 29.3 on pci0
uhci3: LegSup = 0x2f00
usbus3 on uhci3
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xe0480400-0xe04807ff irq 23 at device 29.7 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci0
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib5: failed to allocate initial memory window: 0xe0100000-0xe02fffff
pci5: <ACPI PCI bus> on pcib5
pcib6: <PCI-PCI bridge> at device 0.0 on pci5
pci6: <PCI bus> on pcib6
dc0: <Intel 21143 10/100BaseTX> mem 0xe0200c00-0xe0200fff irq 21 at device 4.0 on pci6
miibus0: <MII bus> on dc0
lxtphy0: <LXT970 10/100 media interface> PHY 0 on miibus0
lxtphy0: 100baseFX, 100baseFX-FDX, none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: Ethernet address: 00:30:6e:2d:7f:44
dc1: <Intel 21143 10/100BaseTX> mem 0xe0200800-0xe0200bff irq 22 at device 5.0 on pci6
miibus1: <MII bus> on dc1
lxtphy1: <LXT970 10/100 media interface> PHY 0 on miibus1
lxtphy1: 100baseFX, 100baseFX-FDX, none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc1: Ethernet address: 00:30:6e:2d:7f:45
dc2: <Intel 21143 10/100BaseTX> port 0x2080-0x20ff mem 0xe0200400-0xe02007ff irq 23 at device 6.0 on pci6
miibus2: <MII bus> on dc2
lxtphy2: <LXT970 10/100 media interface> PHY 0 on miibus2
lxtphy2: 100baseFX, 100baseFX-FDX, none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc2: Ethernet address: 00:30:6e:2d:7f:46
dc3: <Intel 21143 10/100BaseTX> port 0x2000-0x207f mem 0xe0200000-0xe02003ff irq 20 at device 7.0 on pci6
miibus3: <MII bus> on dc3
lxtphy3: <LXT970 10/100 media interface> PHY 0 on miibus3
lxtphy3: 100baseFX, 100baseFX-FDX, none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc3: Ethernet address: 00:30:6e:2d:7f:47
pcib7: <PCI-PCI bridge> at device 8.0 on pci5
pcib7: failed to allocate initial memory window: 0xe0100000-0xe01fffff
pci7: <PCI bus> on pcib7
dc4: <Intel 21143 10/100BaseTX> irq 22 at device 4.0 on pci7
miibus4: <MII bus> on dc4
nsphyter0: <DP83843 10/100 media interface> PHY 1 on miibus4
nsphyter0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc4: Ethernet address: 00:80:c8:b9:19:49
dc5: <Intel 21143 10/100BaseTX> irq 21 at device 5.0 on pci7
miibus5: <MII bus> on dc5
nsphyter1: <DP83843 10/100 media interface> PHY 1 on miibus5
nsphyter1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc5: Ethernet address: 00:80:c8:b9:19:4a
dc6: <Intel 21143 10/100BaseTX> port 0x1080-0x10ff irq 20 at device 6.0 on pci7
miibus6: <MII bus> on dc6
nsphyter2: <DP83843 10/100 media interface> PHY 1 on miibus6
nsphyter2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc6: Ethernet address: 00:80:c8:b9:19:4b
dc7: <Intel 21143 10/100BaseTX> port 0x1000-0x107f irq 23 at device 7.0 on pci7
miibus7: <MII bus> on dc7
nsphyter3: <DP83843 10/100 media interface> PHY 1 on miibus7
nsphyter3: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc7: Ethernet address: 00:80:c8:b9:19:4c
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 SATA300 controller> port 0x40b8-0x40bf,0x40cc-0x40cf,0x40b0-0x40b7,0x40c8-0x40cb,0x40a0-0x40af mem 0xe0480000-0xe04803ff irq 19 at device 31.2 on pci0
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ata0: <ATA channel> at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1: <ATA channel> at port 0x170-0x177,0x376 irq 15 on isa0
ppc0: parallel port not found.
p4tcc0: <CPU Frequency Thermal Control> on cpu0
p4tcc1: <CPU Frequency Thermal Control> on cpu1
p4tcc2: <CPU Frequency Thermal Control> on cpu2
p4tcc3: <CPU Frequency Thermal Control> on cpu3
Timecounters tick every 1.000 msec
random: unblocking device.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
usbus4: 480Mbps High Speed USB v2.0
uhub0: 2 ports with 2 removable, self powered
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
ada0 at ata2 bus 0 scbus0 target 0 lun 0
ada0: <WDC WD800JD-75MSA3 10.01E04> ATA-7 SATA 2.x device
ada0: Serial Number WD-WMAM9ZL59310
ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada0: 76293MB (156250000 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
lapic1: Forcing LINT1 to edge trigger
SMP: AP CPU #1 Launched!
lapic2: Forcing LINT1 to edge trigger
SMP: AP CPU #2 Launched!
lapic3: Forcing LINT1 to edge trigger
SMP: AP CPU #3 Launched!
Timecounter "TSC" frequency 1666720260 Hz quality 1000
Root mount waiting for: usbus4
Root mount waiting for: usbus4
uhub4: 8 ports with 8 removable, self powered
Trying to mount root from ufs:/dev/ada0s2a [rw]...
********************************* DEVINFO *********************************
nexus0
npx0
apic0
ram0
acpi0
cpu0
p4tcc0
cpufreq0
cpu1
p4tcc1
cpufreq1
cpu2
p4tcc2
cpufreq2
cpu3
p4tcc3
cpufreq3
acpi_button0
pcib0
pci0
hostb0
vgapci0
agp0
pcib1
pci1
pcib2
pci2
pcib3
pci3
pcib4
pci4
uhci0
usbus0
uhub0
uhci1
usbus1
uhub1
uhci2
usbus2
uhub2
uhci3
usbus3
uhub3
ehci0
usbus4
uhub4
pcib5
pci5
pcib6
pci6
dc0
miibus0
lxtphy0
dc1
miibus1
lxtphy1
dc2
miibus2
lxtphy2
dc3
miibus3
lxtphy3
isab0
isa0
pmtimer0
sc0
vga0
ata0
ata1
atapci0
ata2
ata3
acpi_sysresource0
pci_link0
pci_link1
pci_link2
pci_link3
pci_link4
pci_link5
pci_link6
pci_link7
atdma0
atrtc0
atpic0
npxisa0
attimer0
acpi_sysresource1
atkbdc0
atkbd0
uart0
uart1
hpet0
acpi_timer0
********************************* VMSTAT *********************************
interrupt total rate
irq1: atkbd0 76 0
irq4: uart0 622 4
irq19: uhci1+ 1473 11
irq20: hpet0 dc3 13274 99
irq22: dc1 2360 17
Total 17805 133
>Release-Note:
>Audit-Trail:
>Unformatted:
More information about the freebsd-bugs
mailing list