kern/184419: carp does not detect member when using vlan
Rasmus Fauske
rfauske at gmail.com
Sun Dec 1 19:40:00 UTC 2013
>Number: 184419
>Category: kern
>Synopsis: carp does not detect member when using vlan
>Confidential: no
>Severity: non-critical
>Priority: medium
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Sun Dec 01 19:40:00 UTC 2013
>Closed-Date:
>Last-Modified:
>Originator: Rasmus Fauske
>Release: FreeBSD 10.0-BETA3 amd64
>Organization:
Rasmus Fauske
>Environment:
System: FreeBSD fw1.securedomainservice.net 10.0-BETA3 FreeBSD 10.0-BETA3 #0 r257580: Sun Nov 3 19:43:01 UTC 2013 root at snap.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
>Description:
When I configure a sub interface with carp maually on two firewalls on a vlan both stays as master.
This results in an ip conflict in the network since both are active.
config fw1:
ifconfig lan0.10 create
ifconfig lan0.10 inet 10.50.189.254 netmask 255.255.255.0 vhid 12 pass iepheu5ZiafaM8Ba advbase 1 advskew 0 up
config fw2:
ifconfig lan0.10 create
ifconfig lan0.10 inet 10.50.189.254 netmask 255.255.255.0 vhid 12 pass iepheu5ZiafaM8Ba advbase 1 advskew 10 up
ifconfig fw1:
lan0.10: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=103<RXCSUM,TXCSUM,TSO4>
ether 00:25:90:97:98:53
inet6 fe80::225:90ff:fe97:9853%lan0.10 prefixlen 64 scopeid 0x8
inet 10.50.189.254 netmask 0xffffff00 broadcast 10.50.189.255 vhid 12
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
vlan: 10 parent interface: lan0
carp: MASTER vhid 12 advbase 1 advskew 0
ifconfig fw2:
lan0.10: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=103<RXCSUM,TXCSUM,TSO4>
ether 00:25:90:97:98:9f
inet6 fe80::225:90ff:fe97:989f%lan0.10 prefixlen 64 scopeid 0x8
inet 10.50.189.254 netmask 0xffffff00 broadcast 10.50.189.255 vhid 12
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
vlan: 10 parent interface: lan0
carp: MASTER vhid 12 advbase 1 advskew 10
>How-To-Repeat:
Configure carp on vlan interface as noted in the description
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
More information about the freebsd-bugs
mailing list