kern/162859: [acpi] ACPI battery/acline monitoring partialy working
(switching)
Maciej Suszko
msuszko at gmail.com
Thu Nov 24 21:50:09 UTC 2011
>Number: 162859
>Category: kern
>Synopsis: [acpi] ACPI battery/acline monitoring partialy working (switching)
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Thu Nov 24 21:50:08 UTC 2011
>Closed-Date:
>Last-Modified:
>Originator: Maciej Suszko
>Release: 9.0-PRERELEASE
>Organization:
>Environment:
FreeBSD arsenic.lan 9.0-PRERELEASE FreeBSD 9.0-PRERELEASE #0 r227939: Thu Nov 24 21:27:32 CET 2011 root at arsenic.lan:/usr/obj/usr/src/sys/GENERIC amd64
>Description:
This problem is similar to kern/160838, but in my case - acpiconf -i batt show all the information (AC adapter connected):
tlhscd at arsenic:~ $ sysctl hw.acpi.acline
hw.acpi.acline: 1
tlhscd at arsenic:~ $ acpiconf -i batt
Design capacity: 4241 mAh
Last full capacity: 4241 mAh
Technology: secondary (rechargeable)
Design voltage: 14400 mV
Capacity (warn): 213 mAh
Capacity (low): 43 mAh
Low/warn granularity: 100 mAh
Warn/full granularity: 100 mAh
Model number: Primary
Serial number: 11436 2010/03/05
Type: LIon
OEM info: Hewlett-Packard
State: charging
Remaining capacity: 99%
Remaining time: unknown
Present rate: 341 mA (5703 mW)
Present voltage: 16727 mV
After disconnecting AC adapter, acpiconf shows the battery is discharging, but remaining capacity, time and rates does not change:
tlhscd at arsenic:~ $ sysctl hw.acpi.acline
hw.acpi.acline: 0
tlhscd at arsenic:~ $ acpiconf -i batt
Design capacity: 4240 mAh
Last full capacity: 4240 mAh
Technology: secondary (rechargeable)
Design voltage: 14400 mV
Capacity (warn): 212 mAh
Capacity (low): 43 mAh
Low/warn granularity: 100 mAh
Warn/full granularity: 100 mAh
Model number: Primary
Serial number: 11436 2010/03/05
Type: LIon
OEM info: Hewlett-Packard
State: discharging
Remaining capacity: 100%
Remaining time: 1:13
Present rate: 3450 mA (57756 mW)
Present voltage: 16741 mV
Reconnecting AC adapter back does not change computer state - acpiconf shows the same message, hw.acpi.acline is still 0.
>How-To-Repeat:
Boot machine with AC adapter connected, login to system, disconnect and reconnect AC adapter.
The above is observed on HP nx7300 laptop with those settings in rc.conf:
performance_cx_lowest="HIGH"
economy_cx_lowest="LOW"
Setting debug.acpi.max_tasks as temporary fix like in kern/160838 does not work for me.
As far as I remember - in 8.2-STABLE all worked as expected.
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
More information about the freebsd-bugs
mailing list