kern/156797: Double panic with FreeBSD 9-CURRENT and ZFS
Chris Dillon
cdillon at wolves.k12.mo.us
Tue May 3 16:50:11 UTC 2011
>Number: 156797
>Category: kern
>Synopsis: Double panic with FreeBSD 9-CURRENT and ZFS
>Confidential: no
>Severity: critical
>Priority: medium
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Tue May 03 16:50:10 UTC 2011
>Closed-Date:
>Last-Modified:
>Originator: Chris Dillon
>Release: 9.0-CURRENT
>Organization:
>Environment:
FreeBSD rsnas1.int.wolves.k12.mo.us 9.0-CURRENT FreeBSD 9.0-CURRENT #4: Wed Apr 20 17:27:58 CDT 2011 root at rsnas1.int.wolves.k12.mo.us:/usr/obj/usr/src/sys/RSNAS1 amd64
>Description:
The system hung and never rebooted, however, it was still alive enough to print the "Limiting closed port RST response" while I was actually watching it, about 8 hours after the panic. Unfortunately, since this is a fully-ZFS system, I do not have any crashdumps. I will add another HDD and just use it to store crashdumps if I start to get panics more often.
Screenshot of the console with panic:
http://dl.dropbox.com/u/5055904/20110503-freebsd-zfs-panic.png
Text on the console:
vputx: negative ref count
0xfffffe01334da1e0: tag zfs, type VDIR
usecount 0, writecount 0, refcount 1 mountedhere 0
flags (VI_OWEINACT)
VI_LOCKed lock type zfs: EXCL by thread 0xfffffe006928d8c0 (pid 9317)
with exclusive waiters pending
panic: vputx: negative ref cnt
cpuid = 2
Uptime 23h46m51s
Cannot dump. Device not defined or unavailable.
Automatic reboot in 15 seconds - press a key on the console to abort
Sleeping thread (tid 101270, pid9317) owns a non-sleepable lock
panic: sleeping thread
cpuid = 2
Limiting closed port RST response from 210 to 200 packets/sec
>How-To-Repeat:
The system is an HP DL380 G5 with dual Xeon X5460 CPUs, 32GB RAM, and two LSI SAS HBAs with some Intel X25-E SSDs and a shelf full of disks attached.
Link to dmesg:
http://dl.dropbox.com/u/5055904/20110503-freebsd-zfs-dmesg.txt
The system is scheduled in crontab to reboot every 24 hours in an attempt to improve system stability (due to some freezes, not panics), so based on the Uptime that was printed in the panic and the crontab entries, the scripts which I use to create/delete daily ZFS snapshots may have been running at the time of the panic.
>Fix:
Unknown
Patch attached with submission follows:
Copyright (c) 1992-2011 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-CURRENT #4: Wed Apr 20 17:27:58 CDT 2011
root at rsnas1.int.wolves.k12.mo.us:/usr/obj/usr/src/sys/RSNAS1 amd64
module_register: module pci/mps already exists!
Module pci/mps failed to register: 17
CPU: Intel(R) Xeon(R) CPU X5460 @ 3.16GHz (3166.73-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x10676 Family = 6 Model = 17 Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant, performance statistics
real memory = 34359738368 (32768 MB)
avail memory = 33105801216 (31572 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <HP ProLiant>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 2 package(s) x 4 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20110413/tbfadt-638)
ACPI Warning: Invalid length for Pm2ControlBlock: 32, using default 8 (20110413/tbfadt-638)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <HP ProLiant> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
ACPI Warning: For \\_SB_.PCI0.PT02._PRT: Return Package has no elements (empty) (20110413/nspredef-500)
pci9: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci9
pci10: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci10
pci11: <ACPI PCI bus> on pcib3
mps0: <LSI SAS2008> port 0x4000-0x40ff mem 0xfdcf0000-0xfdcf3fff,0xfdc80000-0xfdcbffff irq 16 at device 0.0 on pci11
mps0: Firmware: 08.00.00.00
mps0: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
pcib4: <ACPI PCI-PCI bridge> at device 1.0 on pci10
pci14: <ACPI PCI bus> on pcib4
pci14: <serial bus, Fibre Channel> at device 0.0 (no driver attached)
pcib5: <ACPI PCI-PCI bridge> at device 2.0 on pci10
pci17: <ACPI PCI bus> on pcib5
pcib6: <PCI-PCI bridge> at device 0.3 on pci9
pci18: <PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci6: <ACPI PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci19: <ACPI PCI bus> on pcib8
mps1: <LSI SAS2008> port 0x6000-0x60ff mem 0xfdef0000-0xfdef3fff,0xfde80000-0xfdebffff irq 18 at device 0.0 on pci19
mps1: Firmware: 08.00.00.00
mps1: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
pcib9: <PCI-PCI bridge> at device 5.0 on pci0
pci22: <PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci23: <ACPI PCI bus> on pcib10
pci23: <serial bus, Fibre Channel> at device 0.0 (no driver attached)
pcib11: <PCI-PCI bridge> at device 7.0 on pci0
pci26: <PCI bus> on pcib11
pcib12: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib12
pcib13: <PCI-PCI bridge> at device 0.0 on pci2
pci3: <PCI bus> on pcib13
bce0: <HP NC373i Multifunction Gigabit Server Adapter (B2)> mem 0xf8000000-0xf9ffffff irq 16 at device 0.0 on pci3
bce0: /usr/src/sys/dev/bce/if_bce.c(1253): Management firmware enabled but not running!
miibus0: <MII bus> on bce0
brgphy0: <BCM5708C 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bce0: Ethernet address: 00:1e:0b:cb:f4:68
bce0: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); B/C (1.9.6); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NOT RUNNING!)
Coal (RX:6,6,18,18; TX:20,20,80,80)
pcib14: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pci4: <ACPI PCI bus> on pcib14
pcib15: <PCI-PCI bridge> at device 0.0 on pci4
pci5: <PCI bus> on pcib15
bce1: <HP NC373i Multifunction Gigabit Server Adapter (B2)> mem 0xfa000000-0xfbffffff irq 17 at device 0.0 on pci5
bce1: /usr/src/sys/dev/bce/if_bce.c(1253): Management firmware enabled but not running!
miibus1: <MII bus> on bce1
brgphy1: <BCM5708C 10/100/1000baseTX PHY> PHY 1 on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bce1: Ethernet address: 00:1e:0b:cb:f4:66
bce1: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); B/C (1.9.6); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NOT RUNNING!)
Coal (RX:6,6,18,18; TX:20,20,80,80)
uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port 0x1000-0x101f irq 16 at device 29.0 on pci0
usbus0: <Intel 631XESB/632XESB/3100 USB controller USB-1> on uhci0
uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port 0x1020-0x103f irq 17 at device 29.1 on pci0
usbus1: <Intel 631XESB/632XESB/3100 USB controller USB-2> on uhci1
uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port 0x1040-0x105f irq 18 at device 29.2 on pci0
usbus2: <Intel 631XESB/632XESB/3100 USB controller USB-3> on uhci2
uhci3: <Intel 631XESB/632XESB/3100 USB controller USB-4> port 0x1060-0x107f irq 19 at device 29.3 on pci0
usbus3: <Intel 631XESB/632XESB/3100 USB controller USB-4> on uhci3
ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xf7df0000-0xf7df03ff irq 16 at device 29.7 on pci0
usbus4: EHCI version 1.0
usbus4: <Intel 63XXESB USB 2.0 controller> on ehci0
pcib16: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib16
vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem 0xd8000000-0xdfffffff,0xf7ff0000-0xf7ffffff irq 23 at device 3.0 on pci1
pci1: <base peripheral> at device 4.0 (no driver attached)
pci1: <base peripheral> at device 4.2 (no driver attached)
uhci4: <UHCI (generic) USB controller> port 0x3800-0x381f irq 22 at device 4.4 on pci1
usbus5: <UHCI (generic) USB controller> on uhci4
pci1: <serial bus> at device 4.6 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 63XXESB2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x500-0x50f irq 17 at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
acpi_tz0: <Thermal Zone> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcafff,0xd3000-0xe17ff,0xe6000-0xe7fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0
Event timer "RTC" frequency 32768 Hz quality 0
uart1: <Non-standard ns8250 class UART with FIFOs> at port 0x2f8-0x2ff irq 3 on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 4921492106004921
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 4921492106004921
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 4921492106004921
device_attach: est2 attach returned 6
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 4921492106004921
device_attach: est3 attach returned 6
p4tcc3: <CPU Frequency Thermal Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 4921492106004921
device_attach: est4 attach returned 6
p4tcc4: <CPU Frequency Thermal Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 4921492106004921
device_attach: est5 attach returned 6
p4tcc5: <CPU Frequency Thermal Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 4921492106004921
device_attach: est6 attach returned 6
p4tcc6: <CPU Frequency Thermal Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 4921492106004921
device_attach: est7 attach returned 6
p4tcc7: <CPU Frequency Thermal Control> on cpu7
ZFS filesystem version 5
ZFS storage pool version 28
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
usbus5: 12Mbps Full Speed USB v1.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
ugen5.1: <0x103c> at usbus5
uhub5: <0x103c UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
acd0: DVDR <TEAC DV-W28E-RW/G.B1> at ata0-master UDMA33
bce0: bce_pulse(): Warning: bootcode thinks driver is absent! (bc_state = 0x00000006)
ugen5.2: <HP> at usbus5
ukbd0: <Virtual Keyboard> on usbus5
kbd2 at ukbd0
ums0: <Virtual Mouse> on usbus5
ums0: 3 buttons and [XY] coordinates ID=0
uhub4: 8 ports with 8 removable, self powered
da0 at mps0 bus 0 scbus0 target 0 lun 0
da0: <ATA SSDSA2SH032G1GN 8860> Fixed Direct Access SCSI-5 device
da0: 300.000MB/s transfers
da0: Command Queueing enabled
da0: 30517MB (62500000 512 byte sectors: 255H 63S/T 3890C)
da1 at mps0 bus 0 scbus0 target 1 lun 0
da1: <ATA SSDSA2SH032G1GN 8860> Fixed Direct Access SCSI-5 device
da1: 300.000MB/s transfers
da1: Command Queueing enabled
da1: 30517MB (62500000 512 byte sectors: 255H 63S/T 3890C)
da2 at mps0 bus 0 scbus0 target 2 lun 0
da2: <ATA SSDSA2SH032G1GN 8860> Fixed Direct Access SCSI-5 device
da2: 300.000MB/s transfers
da2: Command Queueing enabled
da2: 30517MB (62500000 512 byte sectors: 255H 63S/T 3890C)
da3 at mps0 bus 0 scbus0 target 3 lun 0
da3: <ATA SSDSA2SH032G1GN 8860> Fixed Direct Access SCSI-5 device
da3: 300.000MB/s transfers
da3: Command Queueing enabled
da3: 30517MB (62500000 512 byte sectors: 255H 63S/T 3890C)
da7 at mps1 bus 0 scbus1 target 1 lun 0
da7: <ATA GB0750C4414 HPG4> Fixed Direct Access SCSI-5 device
da7: 150.000MB/s transfers
da7: Command Queueing enabled
da7: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C)
da4 at mps0 bus 0 scbus0 target 5 lun 0
da4: <HP DH072BB978 HPDA> Fixed Direct Access SCSI-5 device
da4: 300.000MB/s transfers
da4: Command Queueing enabled
da4: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da5 at mps0 bus 0 scbus0 target 6 lun 0
da5: <HP DH072BB978 HPDA> Fixed Direct Access SCSI-5 device
da5: 300.000MB/s transfers
da5: Command Queueing enabled
da5: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da6 at mps0 bus 0 scbus0 target 7 lun 0
da6: <HP DH072BB978 HPDA> Fixed Direct Access SCSI-5 device
da6: 300.000MB/s transfers
da6: Command Queueing enabled
da6: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da8 at mps1 bus 0 scbus1 target 2 lun 0
da8: <ATA GB0750C4414 HPG4> Fixed Direct Access SCSI-5 device
da8: 150.000MB/s transfers
da8: Command Queueing enabled
da8: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C)
da9 at mps1 bus 0 scbus1 target 3 lun 0
da9: <ATA GB0750C4414 HPG4> Fixed Direct Access SCSI-5 device
da9: 150.000MB/s transfers
da9: Command Queueing enabled
da9: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C)
da10 at mps1 bus 0 scbus1 target 4 lun 0
da10: <ATA GB0750C4414 HPG4> Fixed Direct Access SCSI-5 device
da10: 150.000MB/s transfers
da10: Command Queueing enabled
da10: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C)
da11 at mps1 bus 0 scbus1 target 5 lun 0
da11: <ATA GB0750C4414 HPG4> Fixed Direct Access SCSI-5 device
da11: 150.000MB/s transfers
da11: Command Queueing enabled
da11: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C)
da12 at mps1 bus 0 scbus1 target 6 lun 0
da12: <ATA GB0750C4414 HPG4> Fixed Direct Access SCSI-5 device
da12: 150.000MB/s transfers
da12: Command Queueing enabled
da12: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C)
da13 at mps1 bus 0 scbus1 target 7 lun 0
da13: <ATA GB0750C4414 HPG4> Fixed Direct Access SCSI-5 device
da13: 150.000MB/s transfers
da13: Command Queueing enabled
da13: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C)
da14 at mps1 bus 0 scbus1 target 8 lun 0
da14: <ATA GB0750C4414 HPG4> Fixed Direct Access SCSI-5 device
da14: 150.000MB/s transfers
da14: Command Queueing enabled
da14: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C)
da15 at mps1 bus 0 scbus1 target 9 lun 0
da15: <ATA GB0750C4414 HPG4> Fixed Direct Access SCSI-5 device
da15: 150.000MB/s transfers
da15: Command Queueing enabled
da15: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C)
da16 at mps1 bus 0 scbus1 target 10 lun 0
da16: <ATA GB0750C4414 HPG4> Fixed Direct Access SCSI-5 device
da16: 150.000MB/s transfers
da16: Command Queueing enabled
da16: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C)
da17 at mps1 bus 0 scbus1 target 11 lun 0
da17: <ATA GB0750C4414 HPG4> Fixed Direct Access SCSI-5 device
da17: 150.000MB/s transfers
da17: Command Queueing enabled
da17: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C)
da18 at mps1 bus 0 scbus1 target 12 lun 0
da18: <ATA GB0750C4414 HPG4> Fixed Direct Access SCSI-5 device
da18: 150.000MB/s transfers
da18: Command Queueing enabled
da18: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C)
ses0 at mps1 bus 0 scbus1 target 0 lun 0
ses0: <HP MSA60 2.18> Fixed Enclosure Services SCSI-5 device
ses0: 300.000MB/s transfers
ses0: SCSI-3 SES Device
SMP: AP CPU #5 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #7 Launched!
Trying to mount root from zfs:system/freebsd []...
bce0: Gigabit link up!
>Release-Note:
>Audit-Trail:
>Unformatted:
More information about the freebsd-bugs
mailing list