kern/163154: [iwn] fatal firmware error on 9.0-RC3
Trois Six
trois.six at free.fr
Fri Dec 9 22:00:28 UTC 2011
>Number: 163154
>Category: kern
>Synopsis: [iwn] fatal firmware error on 9.0-RC3
>Confidential: no
>Severity: non-critical
>Priority: medium
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Fri Dec 09 22:00:28 UTC 2011
>Closed-Date:
>Last-Modified:
>Originator: Trois Six
>Release: 9.0-RC3-amd64
>Organization:
>Environment:
FreeBSD TFR12PERR.telindus.intra 9.0-RC3 FreeBSD 9.0-RC3 #0: Sun Dec 4 08:56:36 UTC 2011 root at farrell.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64
>Description:
My network card : iwn0: <Intel(R) Centrino(R) Ultimate-N 6300> mem 0xd3300000-0xd3301fff irq 19 at device 0.0 on pci68
/etc/rc.conf contains the following:
wlans_iwn0="wlan0"
ifconfig_wlan0="WPA DHCP"
And /etc/wpa_supplicant.conf has the appropriate settings for some access points :
network={
ssid="myssid"
psk=myasciikey
}
When the system boots or when I start the interface with netif, I have a fatal firmware error and I can't use my card. I tried to disable the bgscan but it didn't change anything :
wlan0: Ethernet address: 00:24:d7:XX:XX:XX
iwn0: iwn_intr: fatal firmware error
firmware error log:
error type = "SYSASSERT" (0x00000005)
program counter = 0x00003C2C
source line = 0x00000580
error data = 0x0000000100000000
branch link = 0x00003C2800003C28
interrupt link = 0x0000153200000000
time = 183809626
driver status:
tx ring 0: qid=0 cur=0 queued=0
tx ring 1: qid=1 cur=0 queued=0
tx ring 2: qid=2 cur=0 queued=0
tx ring 3: qid=3 cur=2 queued=0
tx ring 4: qid=4 cur=64 queued=0
tx ring 5: qid=5 cur=0 queued=0
tx ring 6: qid=6 cur=0 queued=0
tx ring 7: qid=7 cur=0 queued=0
tx ring 8: qid=8 cur=0 queued=0
tx ring 9: qid=9 cur=0 queued=0
tx ring 10: qid=10 cur=0 queued=0
tx ring 11: qid=11 cur=0 queued=0
tx ring 12: qid=12 cur=0 queued=0
tx ring 13: qid=13 cur=0 queued=0
tx ring 14: qid=14 cur=0 queued=0
tx ring 15: qid=15 cur=0 queued=0
tx ring 16: qid=16 cur=0 queued=0
tx ring 17: qid=17 cur=0 queued=0
tx ring 18: qid=18 cur=0 queued=0
tx ring 19: qid=19 cur=0 queued=0
rx ring: cur=14
the link changes from DOWN to UP to DOWN.
I have seen that after every netif start I have two wpa_supplicant process ?
>How-To-Repeat:
At every boot or netif start
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
More information about the freebsd-bugs
mailing list