misc/143420: ACPI issues with Toshiba
Garrett Cooper
yanefbsd at gmail.com
Mon Feb 1 06:00:14 UTC 2010
The following reply was made to PR misc/143420; it has been noted by GNATS.
From: Garrett Cooper <yanefbsd at gmail.com>
To: Michael <msherman77 at gmail.com>
Cc: freebsd-gnats-submit at freebsd.org
Subject: Re: misc/143420: ACPI issues with Toshiba
Date: Sun, 31 Jan 2010 21:35:47 -0800
On Sun, Jan 31, 2010 at 9:22 PM, Michael <msherman77 at gmail.com> wrote:
>
>>Number: =A0 =A0 =A0 =A0 143420
>>Category: =A0 =A0 =A0 misc
>>Synopsis: =A0 =A0 =A0 ACPI issues with Toshiba
>>Confidential: =A0 no
>>Severity: =A0 =A0 =A0 serious
>>Priority: =A0 =A0 =A0 medium
>>Responsible: =A0 =A0freebsd-bugs
>>State: =A0 =A0 =A0 =A0 =A0open
>>Quarter:
>>Keywords:
>>Date-Required:
>>Class: =A0 =A0 =A0 =A0 =A0sw-bug
>>Submitter-Id: =A0 current-users
>>Arrival-Date: =A0 Mon Feb 01 05:30:07 UTC 2010
>>Closed-Date:
>>Last-Modified:
>>Originator: =A0 =A0 Michael
>>Release: =A0 =A0 =A0 =A08.0 (PCBSD 8.0 Beta)
>>Organization:
>>Environment:
> FreeBSD pcbsd-2645 8.0-RELEASE-p1 FreeBSD 8.0-RELEASE-p1 #3: Fri Dec 11 1=
3:33:42 PST 2009 =A0 =A0 root at build8x32.pcbsd.org:/usr/obj/usr/pcbsd-build8=
0/fbsd-source/8.0-src/sys/PCBSD =A0i386
>>Description:
> I just installed PCBSD 8.0 Beta (which is FreeBSD 8.0 release-p1) on
> my Toshiba Satellite.
> Specs: CPU: 1.9 Ghz Athlon X 2. Video: ATI chipset (radeonhd driver)
> Audio: Intel (sound_hda) Wireless: (Atheros driver)
> ACPI doesn't fully work. No suspend / resume, but I can live without it.
>
> What does bother me is that the laptop runs very hot 60+ C. Other
> systems run at ~45 - 50C
> Enabling powerd makes system very slow (almost unusable) and produces
> the message: set freq failed, error 6
>
> dmesg.boot
>
> Copyright (c) 1992-2009 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> =A0 =A0 =A0 =A0The Regents of the University of California. All rights re=
served.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 8.0-RELEASE-p1 #3: Fri Dec 11 13:33:42 PST 2009
> =A0 =A0root at build8x32.pcbsd.org:/usr/obj/usr/pcbsd-build80/fbsd-source=
/8.0-src/sys/PCBSD
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: AMD Athlon(tm) X2 Dual-Core QL-60 (1895.28-MHz 686-class CPU)
> =A0Origin =3D "AuthenticAMD" =A0Id =3D 0x200f31 =A0Stepping =3D 1
> =A0Features=3D0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR=
,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
> =A0Features2=3D0x2001<SSE3,CX16>
> =A0AMD Features=3D0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNo=
w!>
> =A0AMD Features2=3D0x131f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch,OSVW,SKINIT>
> =A0TSC: P-state invariant
> real memory =A0=3D 2147483648 (2048 MB)
> avail memory =3D 1821257728 (1736 MB)
> ACPI APIC Table: <TOSINV TOSINV00>
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> FreeBSD/SMP: 1 package(s) x 2 core(s)
> =A0cpu0 (BSP): APIC ID: =A00
> =A0cpu1 (AP): APIC ID: =A01
> ioapic0: Changing APIC ID to 4
> ioapic0 <Version 2.1> irqs 0-23 on motherboard
> kbd1 at kbdmux0
> module_register_init: MOD_LOAD (splash_pcx, 0xc0fbe830, 0) error 2
> cryptosoft0: <software crypto> on motherboard
> acpi0: <TOSINV TOSINV00> on motherboard
> acpi0: [ITHREAD]
> acpi0: Power Button (fixed)
> Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
> acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
> acpi_ec0: <Embedded Controller: GPE 0x7> port 0x62,0x66 on acpi0
> acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on a=
cpi0
> Timecounter "HPET" frequency 14318180 Hz quality 900
> acpi_button0: <Power Button> on acpi0
> acpi_lid0: <Control Method Lid Switch> on acpi0
> battery0: <ACPI Control Method Battery> on acpi0
> acpi_acad0: <AC Adapter> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> vgapci0: <VGA-compatible display> port 0x6000-0x60ff mem
> 0x80000000-0x8fffffff,0x96300000-0x9630ffff,0x96200000-0x962fffff irq
> 18 at device 5.0 on pci1
> pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0
> pci2: <ACPI PCI bus> on pcib2
> pcib3: <ACPI PCI-PCI bridge> at device 5.0 on pci0
> pci4: <ACPI PCI bus> on pcib3
> re0: <RealTek 8101E/8102E/8102EL PCIe 10/100baseTX> port 0x3000-0x30ff
> mem 0x91010000-0x91010fff,0x91000000-0x9100ffff irq 17 at device 0.0
> on pci4
> re0: Using 1 MSI messages
> re0: Chip rev. 0x34800000
> re0: MAC rev. 0x00000000
> miibus0: <MII bus> on re0
> rlphy0: <RTL8201L 10/100 media interface> PHY 1 on miibus0
> rlphy0: =A010baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> re0: Ethernet address: 00:1e:33:46:bb:a0
> re0: [FILTER]
> pcib4: <ACPI PCI-PCI bridge> at device 6.0 on pci0
> pci5: <ACPI PCI bus> on pcib4
> ath0: <Atheros 5424/2424> mem 0x93100000-0x9310ffff irq 18 at device 0.0 =
on pci5
> ath0: [ITHREAD]
> ath0: AR2425 mac 14.2 RF5424 phy 7.0
> pcib5: <ACPI PCI-PCI bridge> at device 7.0 on pci0
> pci6: <ACPI PCI bus> on pcib5
> atapci0: <ATI IXP700/800 SATA300 controller> port
> 0x7038-0x703f,0x704c-0x704f,0x7030-0x7037,0x7048-0x704b,0x7010-0x701f
> mem 0x96408000-0x964083ff irq 22 at device 17.0 on pci0
> atapci0: [ITHREAD]
> atapci0: AHCI v1.10 controller with 6 3Gbps ports, PM supported
> ata2: <ATA channel 0> on atapci0
> ata2: port is not ready (timeout 0ms) tfd =3D 000001d0
> ata2: software reset clear timeout
> ata2: [ITHREAD]
> ata3: <ATA channel 1> on atapci0
> ata3: [ITHREAD]
> ata4: <ATA channel 2> on atapci0
> ata4: port is not ready (timeout 0ms) tfd =3D 00000180
> ata4: software reset clear timeout
> ata4: [ITHREAD]
> ata5: <ATA channel 3> on atapci0
> ata5: [ITHREAD]
> ata6: <ATA channel 4> on atapci0
> ata6: [ITHREAD]
> ata7: <ATA channel 5> on atapci0
> ata7: [ITHREAD]
> ohci0: <OHCI (generic) USB controller> mem 0x96407000-0x96407fff irq
> 16 at device 18.0 on pci0
> ohci0: [ITHREAD]
> usbus0: <OHCI (generic) USB controller> on ohci0
> ohci1: <OHCI (generic) USB controller> mem 0x96406000-0x96406fff irq
> 16 at device 18.1 on pci0
> ohci1: [ITHREAD]
> usbus1: <OHCI (generic) USB controller> on ohci1
> ehci0: <EHCI (generic) USB 2.0 controller> mem 0x96408500-0x964085ff
> irq 17 at device 18.2 on pci0
> ehci0: [ITHREAD]
> usbus2: waiting for BIOS to give up control
> usbus2: EHCI version 1.0
> usbus2: <EHCI (generic) USB 2.0 controller> on ehci0
> ohci2: <OHCI (generic) USB controller> mem 0x96405000-0x96405fff irq
> 18 at device 19.0 on pci0
> ohci2: [ITHREAD]
> usbus3: <OHCI (generic) USB controller> on ohci2
> ohci3: <OHCI (generic) USB controller> mem 0x96404000-0x96404fff irq
> 18 at device 19.1 on pci0
> ohci3: [ITHREAD]
> usbus4: <OHCI (generic) USB controller> on ohci3
> ehci1: <EHCI (generic) USB 2.0 controller> mem 0x96408400-0x964084ff
> irq 19 at device 19.2 on pci0
> ehci1: [ITHREAD]
> usbus5: waiting for BIOS to give up control
> usbus5: EHCI version 1.0
> usbus5: <EHCI (generic) USB 2.0 controller> on ehci1
> pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
> atapci1: <ATI IXP700/800 UDMA133 controller> port
> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x7000-0x700f irq 16 at device
> 20.1 on pci0
> ata0: <ATA channel 0> on atapci1
> ata0: [ITHREAD]
> ata1: <ATA channel 1> on atapci1
> ata1: [ITHREAD]
> pci0: <multimedia, HDA> at device 20.2 (no driver attached)
> isab0: <PCI-ISA bridge> at device 20.3 on pci0
> isa0: <ISA bus> on isab0
> pcib6: <ACPI PCI-PCI bridge> at device 20.4 on pci0
> pci128: <ACPI PCI bus> on pcib6
> acpi_tz0: <Thermal Zone> on acpi0
> atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> atkbd0: [ITHREAD]
> psm0: <PS/2 Mouse> flags 0x1000 irq 12 on atkbdc0
> psm0: [GIANT-LOCKED]
> psm0: [ITHREAD]
> psm0: model Generic PS/2 mouse, device ID 0
> cpu0: <ACPI CPU> on acpi0
> acpi_throttle0: <ACPI CPU Throttling> on cpu0
> hwpstate0: <Cool`n'Quiet 2.0> on cpu0
> cpu1: <ACPI CPU> on acpi0
> pmtimer0 on isa0
> orm0: <ISA Option ROM> at iomem 0xcf000-0xcffff pnpid ORM0000 on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=3D0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> ppc0: parallel port not found.
> ZFS NOTICE: Prefetch is disabled by default on i386 -- to enable,
> =A0 =A0 =A0 =A0 =A0 =A0add "vfs.zfs.prefetch_disable=3D0" to /boot/loader=
.conf.
> ZFS WARNING: Recommended minimum kmem_size is 512MB; expect unstable beha=
vior.
> =A0 =A0 =A0 =A0 =A0 =A0 Consider tuning vm.kmem_size and vm.kmem_size_max
> =A0 =A0 =A0 =A0 =A0 =A0 in /boot/loader.conf.
> ZFS filesystem version 13
> ZFS storage pool version 13
> Timecounters tick every 1.000 msec
> usbus0: 12Mbps Full Speed USB v1.0
> usbus1: 12Mbps Full Speed USB v1.0
> usbus2: 480Mbps High Speed USB v2.0
> usbus3: 12Mbps Full Speed USB v1.0
> usbus4: 12Mbps Full Speed USB v1.0
> usbus5: 480Mbps High Speed USB v2.0
> ad4: 152627MB <Hitachi HTS542516K9SA00 BBCOC33P> at ata2-master SATA150
> ugen0.1: <ATI> at usbus0
> uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
> ugen1.1: <ATI> at usbus1
> uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
> ugen2.1: <ATI> at usbus2
> uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
> ugen3.1: <ATI> at usbus3
> uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
> ugen4.1: <ATI> at usbus4
> uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
> ugen5.1: <ATI> at usbus5
> uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
> uhub0: 3 ports with 3 removable, self powered
> uhub1: 3 ports with 3 removable, self powered
> uhub3: 3 ports with 3 removable, self powered
> uhub4: 3 ports with 3 removable, self powered
> acd0: DVDR <PIONEER DVD-RW DVRTD08A/1.50> at ata4-master SATA150
> uhub2: 6 ports with 6 removable, self powered
> uhub5: 6 ports with 6 removable, self powered
> ugen5.2: <Chicony Electronics Co., Ltd.> at usbus5
> acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=3D0x24 ascq=3D0x00 sks=3D0x48=
0x00 0x01
> (probe0:ata1:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
> (probe0:ata1:0:0:0): CAM Status: SCSI Status Error
> (probe0:ata1:0:0:0): SCSI Status: Check Condition
> (probe0:ata1:0:0:0): NOT READY asc:3a,1
> (probe0:ata1:0:0:0): Medium not present - tray closed
> (probe0:ata1:0:0:0): Unretryable error
> acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=3D0x24 ascq=3D0x00 sks=3D0x48=
0x00 0x01
> SMP: AP CPU #1 Launched!
> cd0 at ata1 bus 0 target 0 lun 0
> cd0: <PIONEER DVD-RW =A0DVRTD08A 1.50> Removable CD-ROM SCSI-0 device
> cd0: 3.300MB/s transfers
> cd0: Attempt to query device size failed: NOT READY, Medium not
> present - tray closed
> ugen5.3: <Generic> at usbus5
> umass0: <Bulk-In, Bulk-Out, Interface> on usbus5
> umass0: =A0SCSI over Bulk-Only; quirks =3D 0x0000
> Root mount waiting for: usbus5
> umass0:2:0:-1: Attached to scbus2
> Trying to mount root from ufs:/dev/label/rootfs0
> (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
> (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
> (probe0:umass-sim0:0:0:0): NOT READY asc:3a,0
> (probe0:umass-sim0:0:0:0): Medium not present
> (probe0:umass-sim0:0:0:0): Unretryable error
> da0 at umass-sim0 bus 0 target 0 lun 0
> da0: <Generic- Multi-Card 1.00> Removable Direct Access SCSI-0 device
> da0: 40.000MB/s transfers
> da0: Attempt to query device size failed: NOT READY, Medium not present
> wlan0: Ethernet address: 00:21:63:10:a4:d9
> ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based
> forwarding disabled, default to deny, logging disabled
Error 6 corresponds to --
#define ENXIO 6 /* Device not configured */
-- is there a step that wasn't performed before powerd was called?
Thanks,
-Garrett
More information about the freebsd-bugs
mailing list