bin/138771: mouse fails with ACPI enabled

[Eitan Adler]

Lenovo G530 laptop

...
FreeBSD 8.0-BETA4 #0: Sun Sep  6 05:51:03 UTC 2009
    root at almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium(R) Dual-Core CPU       T4200  @ 2.00GHz (1995.02-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x1067a  Stepping = 10
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x400e39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,XSAVE>
  AMD Features=0x20100000<NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant
real memory  = 2147483648 (2048 MB)
avail memory = 2046509056 (1951 MB)
MPTable: <INTEL    MontavinaCRB>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Assuming intbase of 0
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem
0xf4000000-0xf43fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on
pci0
agp0: <Intel GM45 SVGA controller> on vgapci0
agp0: detected 32764k stolen memory
agp0: aperture size is 256M
vgapci1: <VGA-compatible display> mem 0xf4400000-0xf44fffff at device
2.1 on pci0
uhci0: <Intel 82801I (ICH9) USB controller> port 0x1820-0x183f irq 16
at device 26.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x003b
usbus0: <Intel 82801I (ICH9) USB controller> on uhci0
uhci1: <Intel 82801I (ICH9) USB controller> port 0x1840-0x185f irq 21
at device 26.1 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0x0010
usbus1: <Intel 82801I (ICH9) USB controller> on uhci1
uhci2: <Intel 82801I (ICH9) USB controller> port 0x1860-0x187f irq 20
at device 26.2 on pci0
uhci2: [ITHREAD]
uhci2: LegSup = 0x0010
usbus2: <Intel 82801I (ICH9) USB controller> on uhci2
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem
0xf4a04800-0xf4a04bff irq 20 at device 26.7 on pci0
ehci0: [ITHREAD]
usbus3: waiting for BIOS to give up control
usbus3: EHCI version 1.0
usbus3: <Intel 82801I (ICH9) USB 2.0 controller> on ehci0
hdac0: <Intel 82801I High Definition Audio Controller> mem
0xf4a00000-0xf4a03fff irq 22 at device 27.0 on pci0
hdac0: HDA Driver Revision: 20090624_0136
hdac0: [ITHREAD]
pcib1: <MPTable PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <PCI bus> on pcib1
pci2: <base peripheral> at device 0.0 (no driver attached)
pci2: <base peripheral, SD host controller> at device 0.2 (no driver attached)
pci2: <base peripheral> at device 0.3 (no driver attached)
pcib2: <PCI-PCI bridge> irq 16 at device 28.1 on pci0
pci3: <PCI bus> on pcib2
pcib3: <MPTable PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci4: <PCI bus> on pcib3
pci4: <network> at device 0.0 (no driver attached)
pcib4: <PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci5: <PCI bus> on pcib4
pcib5: <MPTable PCI-PCI bridge> irq 16 at device 28.5 on pci0
pci7: <PCI bus> on pcib5
bge0: <Broadcom BCM5906 A2, ASIC rev. 0xc002> mem
0xf4600000-0xf460ffff irq 17 at device 0.0 on pci7
miibus0: <MII bus> on bge0
brgphy0: <BCM5906 10/100baseTX PHY> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bge0: Ethernet address: 00:23:5a:d3:1c:ba
bge0: [ITHREAD]
uhci3: <Intel 82801I (ICH9) USB controller> port 0x1880-0x189f irq 23
at device 29.0 on pci0
uhci3: [ITHREAD]
uhci3: LegSup = 0x2030
usbus4: <Intel 82801I (ICH9) USB controller> on uhci3
uhci4: <Intel 82801I (ICH9) USB controller> port 0x18a0-0x18bf irq 19
at device 29.1 on pci0
uhci4: [ITHREAD]
uhci4: LegSup = 0x0010
usbus5: <Intel 82801I (ICH9) USB controller> on uhci4
uhci5: <Intel 82801I (ICH9) USB controller> port 0x18c0-0x18df irq 18
at device 29.2 on pci0
uhci5: [ITHREAD]
uhci5: LegSup = 0x0010
usbus6: <Intel 82801I (ICH9) USB controller> on uhci5
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem
0xf4a04c00-0xf4a04fff irq 23 at device 29.7 on pci0
ehci1: [ITHREAD]
usbus7: waiting for BIOS to give up control
usbus7: timed out waiting for BIOS
usbus7: EHCI version 1.0
usbus7: <Intel 82801I (ICH9) USB 2.0 controller> on ehci1
pcib6: <PCI-PCI bridge> at device 30.0 on pci0
pci8: <PCI bus> on pcib6
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel AHCI controller> port
0x1818-0x181f,0x180c-0x180f,0x1810-0x1817,0x1808-0x180b,0x18e0-0x18ff
mem 0xf4a04000-0xf4a047ff irq 19 at device 31.2 on pci0
atapci0: [ITHREAD]
atapci0: AHCI v1.20 controller with 4 3Gbps ports, PM not supported
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
cpu0 on motherboard
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 61f0a2306000a23
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1 on motherboard
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 61f0a2306000a23
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
pmtimer0 on isa0
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0c01> can't assign resources (memory)
atrtc0: <AT realtime clock> at port 0x70-0x71 irq 8 pnpid PNP0b00 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 irq 1 pnpid
PNP0303 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0c02> can't assign resources (memory)
unknown: <INT0800> can't assign resources (memory)
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model GlidePoint, device ID 0
orm0: <ISA Option ROMs> at iomem
0xc0000-0xcf7ff,0xdc000-0xdffff,0xe0000-0xe17ff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata0: [ITHREAD]
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
ata1: [ITHREAD]
ppc0: parallel port not found.
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0c02> can't assign resources (memory)
unknown: <INT0800> can't assign resources (memory)
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
ad4: 152627MB <Seagate ST9160827AS 3.CMG> at ata2-master SATA150
acd0: DVDR <HL-DT-ST DVDRAM GSA-T50N/RV06> at ata3-master SATA150
hdac0: HDA Codec #0: Intel G45 HDMI
hdac0: HDA Codec #2: Conexant CX20561 (Hermosa)
pcm0: <HDA Intel G45 HDMI PCM #0 Digital> at cad 0 nid 1 on hdac0
pcm1: <HDA Conexant CX20561 (Hermosa) PCM #0 Analog> at cad 2 nid 1 on hdac0
pcm2: <HDA Conexant CX20561 (Hermosa) PCM #1 Analog> at cad 2 nid 1 on hdac0
SMP: AP CPU #1 Launched!
WARNING: WITNESS option enabled, expect reduced performance.
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
Root mount waiting for: usbus7 usbus3
Root mount waiting for: usbus7 usbus3
Root mount waiting for: usbus7 usbus3
uhub3: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
ugen7.2: <Image Processor> at usbus7
Trying to mount root from ufs:/dev/ad4s1a
bge0: link state changed to UP
ndis0: <Broadcom 802.11g Network Adapter> mem 0xf4700000-0xf4703fff
irq 18 at device 0.0 on pci4
ndis0: [ITHREAD]
ndis0: NDIS API version: 5.1
wlan0: Ethernet address: 00:21:00:e7:75:20
drm0: <Mobile Intel\M-B\M-. GM45 Express Chipset> on vgapci0
info: [drm] MSI enabled 1 message(s)
vgapci0: child drm0 requested pci_enable_busmaster
info: [drm] AGP at 0xd0000000 256MB
info: [drm] Initialized i915 1.6.0 20080730
drm0: [ITHREAD]
lock order reversal:
 1st 0xc55da9b0 bufwait (bufwait) @ /usr/src/sys/kern/vfs_bio.c:2559
 2nd 0xc64cc800 dirhash (dirhash) @ /usr/src/sys/ufs/ufs/ufs_dirhash.c:285
KDB: stack backtrace:
db_trace_self_wrapper(c0c74987,e8ab385c,c08c0f75,c08b1cfb,c0c7785a,...)
at db_trace_self_wrapper+0x26
kdb_backtrace(c08b1cfb,c0c7785a,c592bfc8,c592f290,e8ab38b8,...) at
kdb_backtrace+0x29
_witness_debugger(c0c7785a,c64cc800,c0c98a02,c592f290,c0c9869b,...) at
_witness_debugger+0x25
witness_checkorder(c64cc800,9,c0c9869b,11d,0,...) at witness_checkorder+0x839
_sx_xlock(c64cc800,0,c0c9869b,11d,c6db4910,...) at _sx_xlock+0x85
ufsdirhash_acquire(c55da950,e8ab39d0,24,dc124800,e8ab3988,...) at
ufsdirhash_acquire+0x35
ufsdirhash_add(c6db4910,e8ab39d0,800,e8ab3974,e8ab3978,...) at
ufsdirhash_add+0x13
ufs_direnter(c6dc210c,c6dc2000,e8ab39d0,e8ab3bd8,0,...) at ufs_direnter+0x729
ufs_makeinode(e8ab3bd8,e8ab3b44,e8ab3c00,e8ab3b18,c0bbe3d5,...) at
ufs_makeinode+0x508
ufs_create(e8ab3c00,e8ab3c14,e8ab3b44,e8ab3b44,0,...) at ufs_create+0x30
VOP_CREATE_APV(c0d78220,e8ab3c00,e8ab3bd8,e8ab3b44,c5fa21f0,...) at
VOP_CREATE_APV+0xa5
uipc_bind(c6dc6b44,c649cdc0,c6d356c0,e8ab3c60,c08ece62,...) at uipc_bind+0x32f
sobind(c6dc6b44,c649cdc0,c6d356c0,c649cdc0,c62142a0,...) at sobind+0x23
kern_bind(c6d356c0,c,c649cdc0,c649cdc0,2811bdac,...) at kern_bind+0xc2
bind(c6d356c0,e8ab3cf8,c,c0c78305,c0d57460,...) at bind+0x46
syscall(e8ab3d38) at syscall+0x2a3
Xint0x80_syscall() at Xint0x80_syscall+0x20
--- syscall (104, FreeBSD ELF32, bind), eip = 0x285998bf, esp =
0xbfbfe5dc, ebp = 0xbfbfe628 ---
acquiring duplicate lock of same type: "ftlk"
 1st ftlk @ /usr/src/sys/modules/linux/../../compat/linux/linux_futex.c:177
 2nd ftlk @ /usr/src/sys/modules/linux/../../compat/linux/linux_futex.c:203
KDB: stack backtrace:
db_trace_self_wrapper(c0c74987,e8522b58,c08c0f75,c08b1cfb,c0c7774d,...)
at db_trace_self_wrapper+0x26
kdb_backtrace(c08b1cfb,c0c7774d,c11258b7,c592fc50,e8522bb4,...) at
kdb_backtrace+0x29
_witness_debugger(c0c7774d,c11258f3,c11258b7,cb,0,...) at _witness_debugger+0x25
witness_checkorder(c6060340,9,c11258b7,cb,0,...) at witness_checkorder+0x469
_sx_xlock(c6060340,0,c11258b7,cb,0,...) at _sx_xlock+0x85
futex_get0(c0ad7d2c,c1891700,c6df99d8,0,e8522c48,...) at futex_get0+0x116
linux_sys_futex(c62c5b40,e8522cf8,e8522d18,e8522d1c,c1128f40,...) at
linux_sys_futex+0x6f
syscall(e8522d38) at syscall+0x2a3
Xint0x80_syscall() at Xint0x80_syscall+0x20
--- syscall (240, Linux ELF, linux_sys_futex), eip = 0x28799533, esp =
0xbfbfbfcc, ebp = 0x4000001 ---



On Sun, Sep 13, 2009 at 7:56 AM,  <linimon at freebsd.org> wrote:
> Synopsis: mouse fails with ACPI enabled
>
> State-Changed-From-To: open->feedback
> State-Changed-By: linimon
> State-Changed-When: Sun Sep 13 04:55:56 UTC 2009
> State-Changed-Why:
> You need to give us more information.  Is the mouse USB?  What type of
> system?  A dmesg would be useful, as well as the machine manufacturer.
>
> http://www.freebsd.org/cgi/query-pr.cgi?pr=138771
>



On Sat, Sep 12, 2009 at 10:00 PM,  <FreeBSD-gnats-submit at freebsd.org> wrote:
> Thank you very much for your problem report.
> It has the internal identification `bin/138771'.
> The individual assigned to look at your
> report is: freebsd-bugs.
>
> You can access the state of your problem report at any time
> via this link:
>
> http://www.freebsd.org/cgi/query-pr.cgi?pr=138771
>
>>Category:       bin
>>Responsible:    freebsd-bugs
>>Synopsis:       mouse fails with ACPI enabled
>>Arrival-Date:   Sat Sep 12 19:00:18 UTC 2009
>