kern/138571: [lor] LOR on 8.0-BETA3-AMD64
Rainer Goellner
rgoellner at gmx.de
Tue Sep 8 16:00:09 UTC 2009
The following reply was made to PR kern/138571; it has been noted by GNATS.
From: Rainer Goellner <rgoellner at gmx.de>
To: bug-followup at FreeBSD.org, dimitar.vassilev at gmail.com
Cc:
Subject: Re: kern/138571: [lor] LOR on 8.0-BETA3-AMD64
Date: Tue, 08 Sep 2009 17:34:56 +0200
Same behaviour here on BETA-[34] (and some time before BETA, AFAIR):
Sep 8 01:00:00 medea newsyslog[40772]: logfile turned over due to size>100K
Sep 8 01:08:27 medea syslogd: exiting on signal 15
Sep 8 14:39:50 medea syslogd: kernel boot file is /boot/kernel/kernel
Sep 8 14:39:50 medea kernel: Copyright (c) 1992-2009 The FreeBSD Project.
Sep 8 14:39:50 medea kernel: Copyright (c) 1979, 1980, 1983, 1986,
1988, 1989, 1991, 1992, 1993, 1994
Sep 8 14:39:50 medea kernel: The Regents of the University of
California. All rights reserved.
Sep 8 14:39:50 medea kernel: FreeBSD is a registered trademark of The
FreeBSD Foundation.
Sep 8 14:39:50 medea kernel: FreeBSD 8.0-BETA4 #0: Mon Sep 7 20:08:00
CEST 2009
Sep 8 14:39:50 medea kernel:
root at medea.jabbe.local:/var/tmp/obj/home/freebsd/src/sys/GENERIC
Sep 8 14:39:50 medea kernel: WARNING: WITNESS option enabled, expect
reduced performance.
Sep 8 14:39:50 medea kernel: Timecounter "i8254" frequency 1193182 Hz
quality 0
Sep 8 14:39:50 medea kernel: CPU: Intel(R) Core(TM) i7 CPU 920
@ 2.67GHz (2698.78-MHz K8-class CPU)
Sep 8 14:39:50 medea kernel: Origin = "GenuineIntel" Id = 0x106a5
Stepping = 5
Sep 8 14:39:50 medea kernel:
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Sep 8 14:39:50 medea kernel:
Features2=0x98e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT>
Sep 8 14:39:50 medea kernel: AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
Sep 8 14:39:50 medea kernel: AMD Features2=0x1<LAHF>
Sep 8 14:39:50 medea kernel: TSC: P-state invariant
Sep 8 14:39:50 medea kernel: real memory = 6442450944 (6144 MB)
Sep 8 14:39:50 medea kernel: avail memory = 6177144832 (5890 MB)
Sep 8 14:39:50 medea kernel: ACPI APIC Table: <GBT GBTUACPI>
Sep 8 14:39:50 medea kernel: FreeBSD/SMP: Multiprocessor System
Detected: 8 CPUs
Sep 8 14:39:50 medea kernel: FreeBSD/SMP: 1 package(s) x 4 core(s) x 2
SMT threads
Sep 8 14:39:50 medea kernel: cpu0 (BSP): APIC ID: 0
Sep 8 14:39:50 medea kernel: cpu1 (AP): APIC ID: 1
Sep 8 14:39:50 medea kernel: cpu2 (AP): APIC ID: 2
Sep 8 14:39:50 medea kernel: cpu3 (AP): APIC ID: 3
Sep 8 14:39:50 medea kernel: cpu4 (AP): APIC ID: 4
Sep 8 14:39:50 medea kernel: cpu5 (AP): APIC ID: 5
Sep 8 14:39:50 medea kernel: cpu6 (AP): APIC ID: 6
Sep 8 14:39:50 medea kernel: cpu7 (AP): APIC ID: 7
Sep 8 14:39:50 medea kernel: ioapic0: Changing APIC ID to 2
Sep 8 14:39:50 medea kernel: ioapic0 <Version 2.0> irqs 0-23 on motherboard
Sep 8 14:39:50 medea kernel: kbd1 at kbdmux0
Sep 8 14:39:50 medea kernel: acpi0: <GBT GBTUACPI> on motherboard
Sep 8 14:39:50 medea kernel: acpi0: [ITHREAD]
Sep 8 14:39:50 medea kernel: acpi0: Power Button (fixed)
Sep 8 14:39:50 medea kernel: acpi0: reservation of 0, a0000 (3) failed
Sep 8 14:39:50 medea kernel: acpi0: reservation of 100000, cfde0000 (3)
failed
Sep 8 14:39:50 medea kernel: Timecounter "ACPI-fast" frequency 3579545
Hz quality 1000
Sep 8 14:39:50 medea kernel: acpi_timer0: <24-bit timer at 3.579545MHz>
port 0x408-0x40b on acpi0
Sep 8 14:39:50 medea kernel: acpi_hpet0: <High Precision Event Timer>
iomem 0xfed00000-0xfed003ff on acpi0
Sep 8 14:39:50 medea kernel: Timecounter "HPET" frequency 14318180 Hz
quality 900
Sep 8 14:39:50 medea kernel: acpi_button0: <Power Button> on acpi0
Sep 8 14:39:50 medea kernel: pcib0: <ACPI Host-PCI bridge> port
0xcf8-0xcff on acpi0
Sep 8 14:39:50 medea kernel: pci0: <ACPI PCI bus> on pcib0
Sep 8 14:39:50 medea kernel: pcib1: <PCI-PCI bridge> irq 16 at device
1.0 on pci0
Sep 8 14:39:50 medea kernel: pci1: <PCI bus> on pcib1
Sep 8 14:39:50 medea kernel: pcib2: <PCI-PCI bridge> irq 16 at device
3.0 on pci0
Sep 8 14:39:50 medea kernel: pci2: <PCI bus> on pcib2
Sep 8 14:39:50 medea kernel: vgapci0: <VGA-compatible display> port
0xee00-0xeeff mem 0xd0000000-0xdfffffff,0xfbbe0000-0xfbbeffff irq 16 at
device 0.0 on pci2
Sep 8 14:39:50 medea kernel: hdac0: <ATI RV730 High Definition Audio
Controller> mem 0xfbbfc000-0xfbbfffff irq 17 at device 0.1 on pci2
Sep 8 14:39:50 medea kernel: hdac0: HDA Driver Revision: 20090624_0136
Sep 8 14:39:50 medea kernel: hdac0: [ITHREAD]
Sep 8 14:39:50 medea kernel: pcib3: <PCI-PCI bridge> irq 16 at device
5.0 on pci0
Sep 8 14:39:50 medea kernel: pci3: <PCI bus> on pcib3
Sep 8 14:39:50 medea kernel: pcib4: <PCI-PCI bridge> irq 16 at device
7.0 on pci0
Sep 8 14:39:50 medea kernel: pci4: <PCI bus> on pcib4
Sep 8 14:39:50 medea kernel: pcib5: <PCI-PCI bridge> irq 16 at device
9.0 on pci0
Sep 8 14:39:50 medea kernel: pci5: <PCI bus> on pcib5
Sep 8 14:39:50 medea kernel: pci0: <base peripheral, interrupt
controller> at device 16.0 (no driver attached)
Sep 8 14:39:50 medea kernel: pci0: <base peripheral, interrupt
controller> at device 16.1 (no driver attached)
Sep 8 14:39:50 medea kernel: pci0: <base peripheral, interrupt
controller> at device 17.0 (no driver attached)
Sep 8 14:39:50 medea kernel: pci0: <base peripheral, interrupt
controller> at device 17.1 (no driver attached)
Sep 8 14:39:50 medea kernel: pci0: <base peripheral, interrupt
controller> at device 20.0 (no driver attached)
Sep 8 14:39:50 medea kernel: pci0: <base peripheral, interrupt
controller> at device 20.1 (no driver attached)
Sep 8 14:39:50 medea kernel: pci0: <base peripheral, interrupt
controller> at device 20.2 (no driver attached)
Sep 8 14:39:50 medea kernel: uhci0: <UHCI (generic) USB controller>
port 0xff00-0xff1f irq 16 at device 26.0 on pci0
Sep 8 14:39:50 medea kernel: uhci0: [ITHREAD]
Sep 8 14:39:50 medea kernel: uhci0: LegSup = 0x0f10
Sep 8 14:39:50 medea kernel: usbus0: <UHCI (generic) USB controller> on
uhci0
Sep 8 14:39:50 medea kernel: uhci1: <UHCI (generic) USB controller>
port 0xfe00-0xfe1f irq 21 at device 26.1 on pci0
Sep 8 14:39:50 medea kernel: uhci1: [ITHREAD]
Sep 8 14:39:50 medea kernel: uhci1: LegSup = 0x0f10
Sep 8 14:39:50 medea kernel: usbus1: <UHCI (generic) USB controller> on
uhci1
Sep 8 14:39:50 medea kernel: uhci2: <UHCI (generic) USB controller>
port 0xfd00-0xfd1f irq 18 at device 26.2 on pci0
Sep 8 14:39:50 medea kernel: uhci2: [ITHREAD]
Sep 8 14:39:50 medea kernel: uhci2: LegSup = 0x0f10
Sep 8 14:39:50 medea kernel: usbus2: <UHCI (generic) USB controller> on
uhci2
Sep 8 14:39:50 medea kernel: ehci0: <EHCI (generic) USB 2.0 controller>
mem 0xfbffe000-0xfbffe3ff irq 18 at device 26.7 on pci0
Sep 8 14:39:50 medea kernel: ehci0: [ITHREAD]
Sep 8 14:39:50 medea kernel: usbus3: waiting for BIOS to give up control
Sep 8 14:39:50 medea kernel: usbus3: EHCI version 1.0
Sep 8 14:39:50 medea kernel: usbus3: <EHCI (generic) USB 2.0
controller> on ehci0
Sep 8 14:39:50 medea kernel: hdac1: <Intel 82801J High Definition Audio
Controller> mem 0xfbff4000-0xfbff7fff irq 22 at device 27.0 on pci0
Sep 8 14:39:50 medea kernel: hdac1: HDA Driver Revision: 20090624_0136
Sep 8 14:39:50 medea kernel: hdac1: [ITHREAD]
Sep 8 14:39:50 medea kernel: pcib6: <ACPI PCI-PCI bridge> irq 16 at
device 28.0 on pci0
Sep 8 14:39:50 medea kernel: pci6: <ACPI PCI bus> on pcib6
Sep 8 14:39:50 medea kernel: pcib7: <ACPI PCI-PCI bridge> irq 17 at
device 28.1 on pci0
Sep 8 14:39:50 medea kernel: pci7: <ACPI PCI bus> on pcib7
Sep 8 14:39:50 medea kernel: atapci0: <JMicron JMB363 SATA300
controller> port
0xdf00-0xdf07,0xde00-0xde03,0xdd00-0xdd07,0xdc00-0xdc03,0xdb00-0xdb0f
mem 0xfb9fe000-0xfb9fffff irq 17 at device 0.0 on pci7
Sep 8 14:39:50 medea kernel: atapci0: [ITHREAD]
Sep 8 14:39:50 medea kernel: atapci0: AHCI called from vendor specific
driver
Sep 8 14:39:50 medea kernel: atapci0: AHCI v1.00 controller with 2
3Gbps ports, PM supported
Sep 8 14:39:50 medea kernel: ata2: <ATA channel 0> on atapci0
Sep 8 14:39:50 medea kernel: ata2: [ITHREAD]
Sep 8 14:39:50 medea kernel: ata3: <ATA channel 1> on atapci0
Sep 8 14:39:50 medea kernel: ata3: [ITHREAD]
Sep 8 14:39:50 medea kernel: ata4: <ATA channel 2> on atapci0
Sep 8 14:39:50 medea kernel: ata4: [ITHREAD]
Sep 8 14:39:50 medea kernel: pcib8: <ACPI PCI-PCI bridge> irq 16 at
device 28.4 on pci0
Sep 8 14:39:50 medea kernel: pci8: <ACPI PCI bus> on pcib8
Sep 8 14:39:50 medea kernel: re0: <RealTek
8168/8168B/8168C/8168CP/8168D/8168DP/8111B/8111C/8111CP/8111DP PCIe
Gigabit Ethernet> port 0xce00-0xceff mem
0xfbeff000-0xfbefffff,0xfbef8000-0xfbefbfff irq 16 at device 0.0 on pci8
Sep 8 14:39:50 medea kernel: re0: Using 1 MSI messages
Sep 8 14:39:50 medea kernel: re0: Chip rev. 0x28000000
Sep 8 14:39:50 medea kernel: re0: MAC rev. 0x00000000
Sep 8 14:39:50 medea kernel: miibus0: <MII bus> on re0
Sep 8 14:39:50 medea kernel: rgephy0: <RTL8169S/8110S/8211B media
interface> PHY 1 on miibus0
Sep 8 14:39:50 medea kernel: rgephy0: 10baseT, 10baseT-FDX, 100baseTX,
100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
Sep 8 14:39:50 medea kernel: re0: Ethernet address: 00:24:1d:1d:9c:40
Sep 8 14:39:50 medea kernel: re0: [FILTER]
Sep 8 14:39:50 medea kernel: pcib9: <ACPI PCI-PCI bridge> irq 17 at
device 28.5 on pci0
Sep 8 14:39:50 medea kernel: pci9: <ACPI PCI bus> on pcib9
Sep 8 14:39:50 medea kernel: re1: <RealTek
8168/8168B/8168C/8168CP/8168D/8168DP/8111B/8111C/8111CP/8111DP PCIe
Gigabit Ethernet> port 0xae00-0xaeff mem
0xfbcff000-0xfbcfffff,0xfbcf8000-0xfbcfbfff irq 17 at device 0.0 on pci9
Sep 8 14:39:50 medea kernel: re1: Using 1 MSI messages
Sep 8 14:39:50 medea kernel: re1: Chip rev. 0x28000000
Sep 8 14:39:50 medea kernel: re1: MAC rev. 0x00000000
Sep 8 14:39:50 medea kernel: miibus1: <MII bus> on re1
Sep 8 14:39:50 medea kernel: rgephy1: <RTL8169S/8110S/8211B media
interface> PHY 1 on miibus1
Sep 8 14:39:50 medea kernel: rgephy1: 10baseT, 10baseT-FDX, 100baseTX,
100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
Sep 8 14:39:50 medea kernel: re1: Ethernet address: 00:24:1d:1d:9c:42
Sep 8 14:39:50 medea kernel: re1: [FILTER]
Sep 8 14:39:50 medea kernel: uhci3: <UHCI (generic) USB controller>
port 0xfc00-0xfc1f irq 23 at device 29.0 on pci0
Sep 8 14:39:50 medea kernel: uhci3: [ITHREAD]
Sep 8 14:39:50 medea kernel: uhci3: LegSup = 0x003b
Sep 8 14:39:50 medea kernel: usbus4: <UHCI (generic) USB controller> on
uhci3
Sep 8 14:39:50 medea kernel: uhci4: <UHCI (generic) USB controller>
port 0xfb00-0xfb1f irq 19 at device 29.1 on pci0
Sep 8 14:39:50 medea kernel: uhci4: [ITHREAD]
Sep 8 14:39:50 medea kernel: uhci4: LegSup = 0x0010
Sep 8 14:39:50 medea kernel: usbus5: <UHCI (generic) USB controller> on
uhci4
Sep 8 14:39:50 medea kernel: uhci5: <UHCI (generic) USB controller>
port 0xfa00-0xfa1f irq 18 at device 29.2 on pci0
Sep 8 14:39:50 medea kernel: uhci5: [ITHREAD]
Sep 8 14:39:50 medea kernel: uhci5: LegSup = 0x0010
Sep 8 14:39:50 medea kernel: usbus6: <UHCI (generic) USB controller> on
uhci5
Sep 8 14:39:50 medea kernel: ehci1: <EHCI (generic) USB 2.0 controller>
mem 0xfbffd000-0xfbffd3ff irq 23 at device 29.7 on pci0
Sep 8 14:39:50 medea kernel: ehci1: [ITHREAD]
Sep 8 14:39:50 medea kernel: usbus7: waiting for BIOS to give up control
Sep 8 14:39:50 medea kernel: usbus7: EHCI version 1.0
Sep 8 14:39:50 medea kernel: usbus7: <EHCI (generic) USB 2.0
controller> on ehci1
Sep 8 14:39:50 medea kernel: pcib10: <ACPI PCI-PCI bridge> at device
30.0 on pci0
Sep 8 14:39:50 medea kernel: pci10: <ACPI PCI bus> on pcib10
Sep 8 14:39:50 medea kernel: trm0: <Tekram DC395U/UW/F DC315/U Fast20
Wide SCSI Adapter> port 0xbe00-0xbeff mem 0xfbaff000-0xfbafffff irq 17
at device 1.0 on pci10
Sep 8 14:39:50 medea kernel: trm0: [GIANT-LOCKED]
Sep 8 14:39:50 medea kernel: trm0: [ITHREAD]
Sep 8 14:39:50 medea kernel: fwohci0: <Texas Instruments TSB43AB23> mem
0xfbafe000-0xfbafe7ff,0xfbaf8000-0xfbafbfff irq 18 at device 6.0 on pci10
Sep 8 14:39:50 medea kernel: fwohci0: [ITHREAD]
Sep 8 14:39:50 medea kernel: fwohci0: OHCI version 1.10 (ROM=0)
Sep 8 14:39:50 medea kernel: fwohci0: No. of Isochronous channels is 4.
Sep 8 14:39:50 medea kernel: fwohci0: EUI64 00:1a:32:8e:00:00:24:1d
Sep 8 14:39:50 medea kernel: fwohci0: Phy 1394a available S400, 3 ports.
Sep 8 14:39:50 medea kernel: fwohci0: Link S400, max_rec 2048 bytes.
Sep 8 14:39:50 medea kernel: firewire0: <IEEE1394(FireWire) bus> on fwohci0
Sep 8 14:39:50 medea kernel: fwe0: <Ethernet over FireWire> on firewire0
Sep 8 14:39:50 medea kernel: if_fwe0: Fake Ethernet address:
02:1a:32:00:24:1d
Sep 8 14:39:50 medea kernel: fwe0: Ethernet address: 02:1a:32:00:24:1d
Sep 8 14:39:50 medea kernel: fwip0: <IP over FireWire> on firewire0
Sep 8 14:39:50 medea kernel: fwip0: Firewire address:
00:1a:32:8e:00:00:24:1d @ 0xfffe00000000, S400, maxrec 2048
Sep 8 14:39:50 medea kernel: sbp0: <SBP-2/SCSI over FireWire> on firewire0
Sep 8 14:39:50 medea kernel: dcons_crom0: <dcons configuration ROM> on
firewire0
Sep 8 14:39:50 medea kernel: dcons_crom0: bus_addr 0x2834000
Sep 8 14:39:50 medea kernel: fwohci0: Initiate bus reset
Sep 8 14:39:50 medea kernel: fwohci0: fwohci_intr_core: BUS reset
Sep 8 14:39:50 medea kernel: fwohci0: fwohci_intr_core:
node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
Sep 8 14:39:50 medea kernel: isab0: <PCI-ISA bridge> at device 31.0 on pci0
Sep 8 14:39:50 medea kernel: isa0: <ISA bus> on isab0
Sep 8 14:39:50 medea kernel: atapci1: <Intel ICH10 SATA300 controller>
port
0xf900-0xf907,0xf800-0xf803,0xf700-0xf707,0xf600-0xf603,0xf500-0xf51f
mem 0xfbffc000-0xfbffc7ff irq 19 at device 31.2 on pci0
Sep 8 14:39:50 medea kernel: atapci1: [ITHREAD]
Sep 8 14:39:50 medea kernel: atapci1: AHCI called from vendor specific
driver
Sep 8 14:39:50 medea kernel: atapci1: AHCI v1.20 controller with 6
3Gbps ports, PM supported
Sep 8 14:39:50 medea kernel: ata5: <ATA channel 0> on atapci1
Sep 8 14:39:50 medea kernel: ata5: [ITHREAD]
Sep 8 14:39:50 medea kernel: ata6: <ATA channel 1> on atapci1
Sep 8 14:39:50 medea kernel: ata6: [ITHREAD]
Sep 8 14:39:50 medea kernel: ata7: <ATA channel 2> on atapci1
Sep 8 14:39:50 medea kernel: ata7: [ITHREAD]
Sep 8 14:39:50 medea kernel: ata8: <ATA channel 3> on atapci1
Sep 8 14:39:50 medea kernel: ata8: [ITHREAD]
Sep 8 14:39:50 medea kernel: ata9: <ATA channel 4> on atapci1
Sep 8 14:39:50 medea kernel: ata9: [ITHREAD]
Sep 8 14:39:50 medea kernel: ata10: <ATA channel 5> on atapci1
Sep 8 14:39:50 medea kernel: ata10: [ITHREAD]
Sep 8 14:39:50 medea kernel: pci0: <serial bus, SMBus> at device 31.3
(no driver attached)
Sep 8 14:39:50 medea kernel: atrtc0: <AT realtime clock> port 0x70-0x73
on acpi0
Sep 8 14:39:50 medea kernel: fdc0: <floppy drive controller> port
0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
Sep 8 14:39:50 medea kernel: fdc0: [FILTER]
Sep 8 14:39:50 medea kernel: atkbdc0: <Keyboard controller (i8042)>
port 0x60,0x64 irq 1 on acpi0
Sep 8 14:39:50 medea kernel: atkbd0: <AT Keyboard> irq 1 on atkbdc0
Sep 8 14:39:50 medea kernel: kbd0 at atkbd0
Sep 8 14:39:50 medea kernel: atkbd0: [GIANT-LOCKED]
Sep 8 14:39:50 medea kernel: atkbd0: [ITHREAD]
Sep 8 14:39:50 medea kernel: psm0: <PS/2 Mouse> irq 12 on atkbdc0
Sep 8 14:39:50 medea kernel: psm0: [GIANT-LOCKED]
Sep 8 14:39:50 medea kernel: psm0: [ITHREAD]
Sep 8 14:39:50 medea kernel: psm0: model MouseMan+, device ID 0
Sep 8 14:39:50 medea kernel: cpu0: <ACPI CPU> on acpi0
Sep 8 14:39:50 medea kernel: est0: <Enhanced SpeedStep Frequency
Control> on cpu0
Sep 8 14:39:50 medea kernel: p4tcc0: <CPU Frequency Thermal Control> on
cpu0
Sep 8 14:39:50 medea kernel: cpu1: <ACPI CPU> on acpi0
Sep 8 14:39:50 medea kernel: est1: <Enhanced SpeedStep Frequency
Control> on cpu1
Sep 8 14:39:50 medea kernel: p4tcc1: <CPU Frequency Thermal Control> on
cpu1
Sep 8 14:39:50 medea kernel: cpu2: <ACPI CPU> on acpi0
Sep 8 14:39:50 medea kernel: est2: <Enhanced SpeedStep Frequency
Control> on cpu2
Sep 8 14:39:50 medea kernel: p4tcc2: <CPU Frequency Thermal Control> on
cpu2
Sep 8 14:39:50 medea kernel: cpu3: <ACPI CPU> on acpi0
Sep 8 14:39:50 medea kernel: est3: <Enhanced SpeedStep Frequency
Control> on cpu3
Sep 8 14:39:50 medea kernel: p4tcc3: <CPU Frequency Thermal Control> on
cpu3
Sep 8 14:39:50 medea kernel: cpu4: <ACPI CPU> on acpi0
Sep 8 14:39:50 medea kernel: est4: <Enhanced SpeedStep Frequency
Control> on cpu4
Sep 8 14:39:50 medea kernel: p4tcc4: <CPU Frequency Thermal Control> on
cpu4
Sep 8 14:39:50 medea kernel: cpu5: <ACPI CPU> on acpi0
Sep 8 14:39:50 medea kernel: est5: <Enhanced SpeedStep Frequency
Control> on cpu5
Sep 8 14:39:50 medea kernel: p4tcc5: <CPU Frequency Thermal Control> on
cpu5
Sep 8 14:39:50 medea kernel: cpu6: <ACPI CPU> on acpi0
Sep 8 14:39:50 medea kernel: est6: <Enhanced SpeedStep Frequency
Control> on cpu6
Sep 8 14:39:50 medea kernel: p4tcc6: <CPU Frequency Thermal Control> on
cpu6
Sep 8 14:39:50 medea kernel: cpu7: <ACPI CPU> on acpi0
Sep 8 14:39:50 medea kernel: est7: <Enhanced SpeedStep Frequency
Control> on cpu7
Sep 8 14:39:50 medea kernel: p4tcc7: <CPU Frequency Thermal Control> on
cpu7
Sep 8 14:39:50 medea kernel: orm0: <ISA Option ROMs> at iomem
0xd0000-0xd1fff,0xd2000-0xd9fff on isa0
Sep 8 14:39:50 medea kernel: sc0: <System console> on isa0
Sep 8 14:39:50 medea kernel: sc0: VGA <16 virtual consoles, flags=0x300>
Sep 8 14:39:50 medea kernel: vga0: <Generic ISA VGA> at port
0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Sep 8 14:39:50 medea kernel: Timecounters tick every 1.000 msec
Sep 8 14:39:50 medea kernel: firewire0: 1 nodes, maxhop <= 0 cable IRM
irm(0) (me)
Sep 8 14:39:50 medea kernel: firewire0: bus manager 0
Sep 8 14:39:50 medea kernel: usbus0: 12Mbps Full Speed USB v1.0
Sep 8 14:39:50 medea kernel: usbus1: 12Mbps Full Speed USB v1.0
Sep 8 14:39:50 medea kernel: usbus2: 12Mbps Full Speed USB v1.0
Sep 8 14:39:50 medea kernel: usbus3: 480Mbps High Speed USB v2.0
Sep 8 14:39:50 medea kernel: usbus4: 12Mbps Full Speed USB v1.0
Sep 8 14:39:50 medea kernel: usbus5: 12Mbps Full Speed USB v1.0
Sep 8 14:39:50 medea kernel: usbus6: 12Mbps Full Speed USB v1.0
Sep 8 14:39:50 medea kernel: usbus7: 480Mbps High Speed USB v2.0
Sep 8 14:39:50 medea kernel: ad10: 953868MB <SAMSUNG HD103UJ 1AA01113>
at ata5-master SATA300
Sep 8 14:39:50 medea kernel: ugen0.1: <Intel> at usbus0
Sep 8 14:39:50 medea kernel: uhub0: <Intel UHCI root HUB, class 9/0,
rev 1.00/1.00, addr 1> on usbus0
Sep 8 14:39:50 medea kernel: ugen1.1: <Intel> at usbus1
Sep 8 14:39:50 medea kernel: uhub1: <Intel UHCI root HUB, class 9/0,
rev 1.00/1.00, addr 1> on usbus1
Sep 8 14:39:50 medea kernel: ugen2.1: <Intel> at usbus2
Sep 8 14:39:50 medea kernel: uhub2: <Intel UHCI root HUB, class 9/0,
rev 1.00/1.00, addr 1> on usbus2
Sep 8 14:39:50 medea kernel: ugen3.1: <Intel> at usbus3
Sep 8 14:39:50 medea kernel: uhub3: <Intel EHCI root HUB, class 9/0,
rev 2.00/1.00, addr 1> on usbus3
Sep 8 14:39:50 medea kernel: ugen4.1: <Intel> at usbus4
Sep 8 14:39:50 medea kernel: uhub4: <Intel UHCI root HUB, class 9/0,
rev 1.00/1.00, addr 1> on usbus4
Sep 8 14:39:50 medea kernel: ugen5.1: <Intel> at usbus5
Sep 8 14:39:50 medea kernel: uhub5: <Intel UHCI root HUB, class 9/0,
rev 1.00/1.00, addr 1> on usbus5
Sep 8 14:39:50 medea kernel: ugen6.1: <Intel> at usbus6
Sep 8 14:39:50 medea kernel: uhub6: <Intel UHCI root HUB, class 9/0,
rev 1.00/1.00, addr 1> on usbus6
Sep 8 14:39:50 medea kernel: ugen7.1: <Intel> at usbus7
Sep 8 14:39:50 medea kernel: uhub7: <Intel EHCI root HUB, class 9/0,
rev 2.00/1.00, addr 1> on usbus7
Sep 8 14:39:50 medea kernel: ad12: 953869MB <SAMSUNG HD103UJ 1AA01118>
at ata6-master SATA300
Sep 8 14:39:50 medea kernel: acd0: DVDR <HL-DT-ST BDDVDRW
GGC-H20L/1.03> at ata7-master SATA150
Sep 8 14:39:50 medea kernel: Waiting 5 seconds for SCSI devices to settle
Sep 8 14:39:50 medea kernel: hdac0: HDA Codec #0: ATI R6xx HDMI
Sep 8 14:39:50 medea kernel: pcm0: <HDA ATI R6xx HDMI PCM #0 Digital>
at cad 0 nid 1 on hdac0
Sep 8 14:39:50 medea kernel: hdac1: HDA Codec #2: Realtek ALC885
Sep 8 14:39:50 medea kernel: pcm1: <HDA Realtek ALC885 PCM #0 Analog>
at cad 2 nid 1 on hdac1
Sep 8 14:39:50 medea kernel: pcm2: <HDA Realtek ALC885 PCM #1 Analog>
at cad 2 nid 1 on hdac1
Sep 8 14:39:50 medea kernel: pcm3: <HDA Realtek ALC885 PCM #2 Digital>
at cad 2 nid 1 on hdac1
Sep 8 14:39:50 medea kernel: uhub0: 2 ports with 2 removable, self powered
Sep 8 14:39:50 medea kernel: uhub1: 2 ports with 2 removable, self powered
Sep 8 14:39:50 medea kernel: uhub2: 2 ports with 2 removable, self
poweredSep 8 14:39:50 medea kernel: uhub4: 2 ports with 2 removable,
self powered
Sep 8 14:39:50 medea kernel: uhub5: 2 ports with 2 removable, self powered
Sep 8 14:39:50 medea kernel: uhub6: 2 ports with 2 removable, self powered
Sep 8 14:39:50 medea kernel: uhub3: 6 ports with 6 removable, self powered
Sep 8 14:39:50 medea kernel: uhub7: 6 ports with 6 removable, self powered
Sep 8 14:39:50 medea kernel: ugen6.2: <vendor 0x050f> at usbus6
Sep 8 14:39:50 medea kernel: uhub8: <vendor 0x050f product 0x0003,
class 9/0, rev 1.10/1.00, addr 2> on usbus6
Sep 8 14:39:50 medea kernel: uhub8: 4 ports with 4 removable, self powered
Sep 8 14:39:50 medea kernel: (probe1:trm0:0:1:0): TEST UNIT READY. CDB:
0 0 0 0 0 0
Sep 8 14:39:50 medea kernel: (probe1:trm0:0:1:0): CAM Status: SCSI
Status Error
Sep 8 14:39:50 medea kernel: (probe1:trm0:0:1:0): SCSI Status: Check
Condition
Sep 8 14:39:50 medea kernel: (probe1:trm0:0:1:0): UNIT ATTENTION asc:29,0
Sep 8 14:39:50 medea kernel: (probe1:trm0:0:1:0): Power on, reset, or
bus device reset occurred
Sep 8 14:39:50 medea kernel: (probe1:trm0:0:1:0): Retrying Command (per
Sense Data)
Sep 8 14:39:50 medea kernel: (probe1:trm0:0:1:0): TEST UNIT READY. CDB:
0 0 0 0 0 0
Sep 8 14:39:50 medea kernel: (probe1:trm0:0:1:0): CAM Status: SCSI
Status Error
Sep 8 14:39:50 medea kernel: (probe1:trm0:0:1:0): SCSI Status: Check
Condition
Sep 8 14:39:50 medea kernel: (probe1:trm0:0:1:0): NOT READY asc:3a,0
Sep 8 14:39:50 medea kernel: (probe1:trm0:0:1:0): Medium not present
Sep 8 14:39:50 medea kernel: (probe1:trm0:0:1:0): Unretryable error
Sep 8 14:39:50 medea kernel: SMP: AP CPU #1 Launched!
Sep 8 14:39:50 medea kernel: SMP: AP CPU #3 Launched!
Sep 8 14:39:50 medea kernel: SMP: AP CPU #5 Launched!
Sep 8 14:39:50 medea kernel: SMP: AP CPU #7 Launched!
Sep 8 14:39:50 medea kernel: SMP: AP CPU #2 Launched!
Sep 8 14:39:50 medea kernel: SMP: AP CPU #6 Launched!
Sep 8 14:39:50 medea kernel: SMP: AP CPU #4 Launched!
Sep 8 14:39:50 medea kernel: WARNING: WITNESS option enabled, expect
reduced performance.
Sep 8 14:39:50 medea kernel: cd0 at trm0 bus 0 target 1 lun 0
Sep 8 14:39:50 medea kernel: cd0: <PIONEER DVD-ROM DVD-303F 2.00>
Removable CD-ROM SCSI-2 device
Sep 8 14:39:50 medea kernel: cd0: 20.000MB/s transfers (20.000MHz,
offset 8)
Sep 8 14:39:50 medea kernel: cd0: Attempt to query device size failed:
NOT READY, Medium not present
Sep 8 14:39:50 medea kernel: Trying to mount root from ufs:/dev/ad10s3a
Sep 8 14:39:52 medea kernel: re0: link state changed to UP
Sep 8 14:39:52 medea kernel: re0: link state changed to DOWN
Sep 8 14:39:54 medea kernel: re0: link state changed to UP
Sep 8 14:39:58 medea dhclient: New IP Address (re0): 192.168.1.16
Sep 8 14:39:58 medea kernel: re0: link state changed to DOWN
Sep 8 14:39:58 medea dhclient: New Subnet Mask (re0): 255.255.255.0
Sep 8 14:39:58 medea dhclient: New Broadcast Address (re0): 192.168.1.255
Sep 8 14:39:58 medea dhclient: New Routers (re0): 192.168.1.1
Sep 8 14:39:59 medea login: ROOT LOGIN (root) ON ttyv1
Sep 8 14:40:00 medea kernel: re0: link state changed to UP
Sep 8 14:40:43 medea login: ROOT LOGIN (root) ON ttyv2
Sep 8 14:41:14 medea kernel: lock order reversal:
Sep 8 14:41:14 medea kernel: 1st 0xffffff807ba61f20 bufwait (bufwait) @
/home/freebsd/src/sys/kern/vfs_bio.c:2559
Sep 8 14:41:14 medea kernel: 2nd 0xffffff0006b4f000 dirhash (dirhash) @
/home/freebsd/src/sys/ufs/ufs/ufs_dirhash.c:285
Sep 8 14:41:14 medea kernel: KDB: stack backtrace:
Sep 8 14:41:14 medea kernel: db_trace_self_wrapper() at
db_trace_self_wrapper+0x2a
Sep 8 14:41:14 medea kernel: _witness_debugger() at _witness_debugger+0x2e
Sep 8 14:41:14 medea kernel: witness_checkorder() at
witness_checkorder+0x81e
Sep 8 14:41:14 medea kernel: _sx_xlock() at _sx_xlock+0x55
Sep 8 14:41:14 medea kernel: ufsdirhash_acquire() at
ufsdirhash_acquire+0x33
Sep 8 14:41:14 medea kernel: ufsdirhash_add() at ufsdirhash_add+0x19
Sep 8 14:41:14 medea kernel: ufs_direnter() at ufs_direnter+0x88b
Sep 8 14:41:14 medea kernel: ufs_makeinode() at ufs_makeinode+0x2a7
Sep 8 14:41:14 medea kernel: VOP_CREATE_APV() at VOP_CREATE_APV+0x8d
Sep 8 14:41:14 medea kernel: vn_open_cred() at vn_open_cred+0x468
Sep 8 14:41:14 medea kernel: kern_openat() at kern_openat+0x179
Sep 8 14:41:14 medea kernel: syscall() at syscall+0x1af
Sep 8 14:41:14 medea kernel: Xfast_syscall() at Xfast_syscall+0xe1
Sep 8 14:41:14 medea kernel: --- syscall (5, FreeBSD ELF64, open), rip
= 0x2ca35dfc, rsp = 0x7fffffffe618, rbp = 0x1a4 ---
Sep 8 14:41:31 medea login: ROOT LOGIN (root) ON ttyv3
Sep 8 14:45:31 medea kernel: lock order reversal:
Sep 8 14:45:31 medea kernel: 1st 0xffffff008f8867f8 ufs (ufs) @
/home/freebsd/src/sys/kern/vfs_lookup.c:497
Sep 8 14:45:31 medea kernel: 2nd 0xffffff807c223d58 bufwait (bufwait) @
/home/freebsd/src/sys/ufs/ffs/ffs_softdep.c:6177
Sep 8 14:45:31 medea kernel: 3rd 0xffffff008f194d80 ufs (ufs) @
/home/freebsd/src/sys/kern/vfs_subr.c:2083
Sep 8 14:45:31 medea kernel: KDB: stack backtrace:
Sep 8 14:45:31 medea kernel: db_trace_self_wrapper() at
db_trace_self_wrapper+0x2a
Sep 8 14:45:31 medea kernel: _witness_debugger() at _witness_debugger+0x2e
Sep 8 14:45:31 medea kernel: witness_checkorder() at
witness_checkorder+0x81e
Sep 8 14:45:31 medea kernel: __lockmgr_args() at __lockmgr_args+0xcf3
Sep 8 14:45:31 medea kernel: ffs_lock() at ffs_lock+0x8c
Sep 8 14:45:31 medea kernel: VOP_LOCK1_APV() at VOP_LOCK1_APV+0x9b
Sep 8 14:45:31 medea kernel: _vn_lock() at _vn_lock+0x47
Sep 8 14:45:31 medea kernel: vget() at vget+0x7b
Sep 8 14:45:31 medea kernel: vfs_hash_get() at vfs_hash_get+0xd5
Sep 8 14:45:31 medea kernel: ffs_vgetf() at ffs_vgetf+0x48
Sep 8 14:45:31 medea kernel: softdep_sync_metadata() at
softdep_sync_metadata+0x456
Sep 8 14:45:31 medea kernel: ffs_syncvnode() at ffs_syncvnode+0x210
Sep 8 14:45:31 medea kernel: ffs_truncate() at ffs_truncate+0x4ab
Sep 8 14:45:31 medea kernel: ufs_direnter() at ufs_direnter+0x6ae
Sep 8 14:45:31 medea kernel: ufs_makeinode() at ufs_makeinode+0x2a7
Sep 8 14:45:31 medea kernel: VOP_CREATE_APV() at VOP_CREATE_APV+0x8d
Sep 8 14:45:31 medea kernel: vn_open_cred() at vn_open_cred+0x468
Sep 8 14:45:31 medea kernel: kern_openat() at kern_openat+0x179
Sep 8 14:45:31 medea kernel: syscall() at syscall+0x1af
Sep 8 14:45:31 medea kernel: Xfast_syscall() at Xfast_syscall+0xe1
Sep 8 14:45:31 medea kernel: --- syscall (5, FreeBSD ELF64, open), rip
= 0x2c5abdfc, rsp = 0x7fffffffdc48, rbp = 0x1 ---
Sep 8 15:04:29 medea login: ROOT LOGIN (root) ON ttyv4
Sep 8 16:19:12 medea syslogd: exiting on signal 15
Seems like it has to do with disk operations, like mounting
or while building ports.
More information about the freebsd-bugs
mailing list