SAS HD not detected on LSI SAS1078 (Acer Altos R520) controller
joejoe
joejoe at inbsd.com
Thu May 7 01:12:37 UTC 2009
dmesg on 7.2 R:
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-RELEASE #0: Fri May 1 08:49:13 UTC 2009
root at walker.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU E5405 @ 2.00GHz (2004.98-MHz 686-class
CPU)
Origin = "GenuineIntel" Id = 0x1067a Stepping = 10
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA
,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x40ce33d<SSE3,DTES64,MON,DS_CPL,VMX,TM2,SSSE3,CX16,xTPR,PDCM,DCA,
SSE4.1,XSAVE>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 4
real memory = 2143289344 (2044 MB)
avail memory = 2081705984 (1985 MB)
ACPI APIC Table: <INTEL S5000PAL>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
lapic0: Forcing LINT1 to edge trigger
kbd1 at kbdmux0
acpi0: <INTEL S5000PAL> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xca2,0xca3,0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib3
mpt0: <LSILogic SAS/SATA Adapter> port 0x3000-0x30ff mem
0xb8940000-0xb8943fff,0xb8900000-0xb893ffff irq 16 at device 0.0 on pci3
mpt0: unable to map registers in PIO mode
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci2
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 2.0 on pci2
pci5: <ACPI PCI bus> on pcib5
em0: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0x2020-0x203f mem
0xb8820000-0xb883ffff,0xb8400000-0xb87fffff irq 18 at device 0.0 on pci5
em0: Using MSI interrupt
em0: [FILTER]
em0: Ethernet address: 00:15:17:aa:8f:a8
em1: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0x2000-0x201f mem
0xb8800000-0xb881ffff,0xb8000000-0xb83fffff irq 19 at device 0.1 on pci5
em1: Using MSI interrupt
em1: [FILTER]
em1: Ethernet address: 00:15:17:aa:8f:a9
pcib6: <ACPI PCI-PCI bridge> at device 0.3 on pci1
pci6: <ACPI PCI bus> on pcib6
pcib7: <PCI-PCI bridge> at device 3.0 on pci0
pci7: <PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci8: <ACPI PCI bus> on pcib8
pcib9: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci9: <ACPI PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci10: <ACPI PCI bus> on pcib10
pcib11: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci11: <ACPI PCI bus> on pcib11
pci0: <base peripheral> at device 8.0 (no driver attached)
uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port 0x4080-0x409f
irq 23 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 631XESB/632XESB/3100 USB controller USB-1> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port 0x4060-0x407f
irq 22 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 631XESB/632XESB/3100 USB controller USB-2> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port 0x4040-0x405f
irq 23 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <Intel 631XESB/632XESB/3100 USB controller USB-3> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 631XESB/632XESB/3100 USB controller USB-4> port 0x4020-0x403f
irq 22 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb3: <Intel 631XESB/632XESB/3100 USB controller USB-4> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xb8c00400-0xb8c007ff irq 23
at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 63XXESB USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
pcib12: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci12: <ACPI PCI bus> on pcib12
vgapci0: <VGA-compatible display> port 0x1000-0x10ff mem
0xb0000000-0xb7ffffff,0xb8b00000-0xb8b0ffff irq 17 at device 12.0 on pci12
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 63XXESB2 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x40b0-0x40bf irq 20 at device 31.1 on
pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
atapci1: <Intel 63XXESB2 SATA300 controller> port
0x40c8-0x40cf,0x40e4-0x40e7,0x40c0-0x40c7,0x40e0-0x40e3,0x40a0-0x40af mem
0xb8c00000-0xb8c003ff irq 20 at device 31.2 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
sio0: [FILTER]
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
sio1: [FILTER]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse Explorer, device ID 4
cpu0: <ACPI CPU> on acpi0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
p4tcc3: <CPU Frequency Thermal Control> on cpu3
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem
0xc0000-0xc8fff,0xcf000-0xcffff,0xd0000-0xd0fff pnpid ORM0000 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc0dfab28
GEOM_LABEL: Label for provider md0 is ufsid/49fabd23737484d9.
acd0: DVDR <Optiarc DVD RW AD-7560A/DX06> at ata0-slave UDMA33
lapic1: Forcing LINT1 to edge trigger
SMP: AP CPU #1 Launched!
lapic3: Forcing LINT1 to edge trigger
SMP: AP CPU #3 Launched!
lapic2: Forcing LINT1 to edge trigger
SMP: AP CPU #2 Launched!
GEOM_LABEL: Label for provider acd0 is iso9660/FreeBSD_Install.
Trying to mount root from ufs:/dev/md0
GEOM_LABEL: Label ufsid/49fabd23737484d9 removed.
pciconf -lv :
hostb0 at pci0:0:0:0: class=0x060000 card=0x346c8086 chip=0x25d88086
rev=0xb1 hdr=0x00
class = bridge
subclass = HOST-PCI
pcib1 at pci0:0:2:0: class=0x060400 card=0x00000000 chip=0x25f78086
rev=0xb1 hdr=0x01
class = bridge
subclass = PCI-PCI
pcib7 at pci0:0:3:0: class=0x060400 card=0x00000000 chip=0x25e38086
rev=0xb1 hdr=0x01
class = bridge
subclass = PCI-PCI
pcib8 at pci0:0:4:0: class=0x060400 card=0x00000000 chip=0x25f88086
rev=0xb1 hdr=0x01
class = bridge
subclass = PCI-PCI
pcib9 at pci0:0:5:0: class=0x060400 card=0x00000000 chip=0x25e58086
rev=0xb1 hdr=0x01
class = bridge
subclass = PCI-PCI
pcib10 at pci0:0:6:0: class=0x060400 card=0x00000000 chip=0x25f98086
rev=0xb1 hdr=0x01
class = bridge
subclass = PCI-PCI
pcib11 at pci0:0:7:0: class=0x060400 card=0x00000000 chip=0x25e78086
rev=0xb1 hdr=0x01
class = bridge
subclass = PCI-PCI
none0 at pci0:0:8:0: class=0x088000 card=0x346c8086 chip=0x1a388086
rev=0xb1 hdr=0x00
class = base peripheral
hostb1 at pci0:0:16:0: class=0x060000 card=0x346c8086 chip=0x25f08086
rev=0xb1 hdr=0x00
class = bridge
subclass = HOST-PCI
hostb2 at pci0:0:16:1: class=0x060000 card=0x346c8086 chip=0x25f08086
rev=0xb1 hdr=0x00
class = bridge
subclass = HOST-PCI
hostb3 at pci0:0:16:2: class=0x060000 card=0x346c8086 chip=0x25f08086
rev=0xb1 hdr=0x00
class = bridge
subclass = HOST-PCI
hostb4 at pci0:0:17:0: class=0x060000 card=0x346c8086 chip=0x25f18086
rev=0xb1 hdr=0x00
class = bridge
subclass = HOST-PCI
hostb5 at pci0:0:19:0: class=0x060000 card=0x346c8086 chip=0x25f38086
rev=0xb1 hdr=0x00
class = bridge
subclass = HOST-PCI
hostb6 at pci0:0:21:0: class=0x060000 card=0x346c8086 chip=0x25f58086
rev=0xb1 hdr=0x00
class = bridge
subclass = HOST-PCI
hostb7 at pci0:0:22:0: class=0x060000 card=0x346c8086 chip=0x25f68086
rev=0xb1 hdr=0x00
class = bridge
subclass = HOST-PCI
uhci0 at pci0:0:29:0: class=0x0c0300 card=0x346c8086 chip=0x26888086
rev=0x09 hdr=0x00
class = serial bus
subclass = USB
uhci1 at pci0:0:29:1: class=0x0c0300 card=0x346c8086 chip=0x26898086
rev=0x09 hdr=0x00
class = serial bus
subclass = USB
uhci2 at pci0:0:29:2: class=0x0c0300 card=0x346c8086 chip=0x268a8086
rev=0x09 hdr=0x00
class = serial bus
subclass = USB
uhci3 at pci0:0:29:3: class=0x0c0300 card=0x346c8086 chip=0x268b8086
rev=0x09 hdr=0x00
class = serial bus
subclass = USB
ehci0 at pci0:0:29:7: class=0x0c0320 card=0x346c8086 chip=0x268c8086
rev=0x09 hdr=0x00
class = serial bus
subclass = USB
pcib12 at pci0:0:30:0: class=0x060401 card=0x346c8086 chip=0x244e8086
rev=0xd9 hdr=0x01
class = bridge
subclass = PCI-PCI
isab0 at pci0:0:31:0: class=0x060100 card=0x346c8086 chip=0x26708086
rev=0x09 hdr=0x00
class = bridge
subclass = PCI-ISA
atapci0 at pci0:0:31:1: class=0x01018a card=0x346c8086 chip=0x269e8086
rev=0x09 hdr=0x00
class = mass storage
subclass = ATA
atapci1 at pci0:0:31:2: class=0x01018f card=0x346c8086 chip=0x26808086
rev=0x09 hdr=0x00
class = mass storage
subclass = ATA
none1 at pci0:0:31:3: class=0x0c0500 card=0x346c8086 chip=0x269b8086
rev=0x09 hdr=0x00
class = serial bus
subclass = SMBus
pcib2 at pci0:1:0:0: class=0x060400 card=0x346c8086 chip=0x35008086
rev=0x01 hdr=0x01
class = bridge
subclass = PCI-PCI
pcib6 at pci0:1:0:3: class=0x060400 card=0x346c8086 chip=0x350c8086
rev=0x01 hdr=0x01
class = bridge
subclass = PCI-PCI
pcib3 at pci0:2:0:0: class=0x060400 card=0x346c8086 chip=0x35108086
rev=0x01 hdr=0x01
class = bridge
subclass = PCI-PCI
pcib4 at pci0:2:1:0: class=0x060400 card=0x346c8086 chip=0x35148086
rev=0x01 hdr=0x01
class = bridge
subclass = PCI-PCI
pcib5 at pci0:2:2:0: class=0x060400 card=0x346c8086 chip=0x35188086
rev=0x01 hdr=0x01
class = bridge
subclass = PCI-PCI
mpt0 at pci0:3:0:0: class=0x010000 card=0x35058086 chip=0x00621000
rev=0x04 hdr=0x00
class = mass storage
subclass = SCSI
em0 at pci0:5:0:0: class=0x020000 card=0x346c8086 chip=0x10968086 rev=0x01
hdr=0x00
class = network
subclass = ethernet
em1 at pci0:5:0:1: class=0x020000 card=0x346c8086 chip=0x10968086 rev=0x01
hdr=0x00
class = network
subclass = ethernet
vgapci0 at pci0:12:12:0: class=0x030000 card=0x346c8086 chip=0x515e1002
rev=0x02 hdr=0x00
class = display
subclass = VGA
-------------- next part --------------
hostb0 at pci0:0:0:0: class=0x060000 card=0x346c8086 chip=0x25d88086 rev=0xb1 hdr=0x00
class = bridge
subclass = HOST-PCI
pcib1 at pci0:0:2:0: class=0x060400 card=0x00000000 chip=0x25f78086 rev=0xb1 hdr=0x01
class = bridge
subclass = PCI-PCI
pcib7 at pci0:0:3:0: class=0x060400 card=0x00000000 chip=0x25e38086 rev=0xb1 hdr=0x01
class = bridge
subclass = PCI-PCI
pcib8 at pci0:0:4:0: class=0x060400 card=0x00000000 chip=0x25f88086 rev=0xb1 hdr=0x01
class = bridge
subclass = PCI-PCI
pcib9 at pci0:0:5:0: class=0x060400 card=0x00000000 chip=0x25e58086 rev=0xb1 hdr=0x01
class = bridge
subclass = PCI-PCI
pcib10 at pci0:0:6:0: class=0x060400 card=0x00000000 chip=0x25f98086 rev=0xb1 hdr=0x01
class = bridge
subclass = PCI-PCI
pcib11 at pci0:0:7:0: class=0x060400 card=0x00000000 chip=0x25e78086 rev=0xb1 hdr=0x01
class = bridge
subclass = PCI-PCI
none0 at pci0:0:8:0: class=0x088000 card=0x346c8086 chip=0x1a388086 rev=0xb1 hdr=0x00
class = base peripheral
hostb1 at pci0:0:16:0: class=0x060000 card=0x346c8086 chip=0x25f08086 rev=0xb1 hdr=0x00
class = bridge
subclass = HOST-PCI
hostb2 at pci0:0:16:1: class=0x060000 card=0x346c8086 chip=0x25f08086 rev=0xb1 hdr=0x00
class = bridge
subclass = HOST-PCI
hostb3 at pci0:0:16:2: class=0x060000 card=0x346c8086 chip=0x25f08086 rev=0xb1 hdr=0x00
class = bridge
subclass = HOST-PCI
hostb4 at pci0:0:17:0: class=0x060000 card=0x346c8086 chip=0x25f18086 rev=0xb1 hdr=0x00
class = bridge
subclass = HOST-PCI
hostb5 at pci0:0:19:0: class=0x060000 card=0x346c8086 chip=0x25f38086 rev=0xb1 hdr=0x00
class = bridge
subclass = HOST-PCI
hostb6 at pci0:0:21:0: class=0x060000 card=0x346c8086 chip=0x25f58086 rev=0xb1 hdr=0x00
class = bridge
subclass = HOST-PCI
hostb7 at pci0:0:22:0: class=0x060000 card=0x346c8086 chip=0x25f68086 rev=0xb1 hdr=0x00
class = bridge
subclass = HOST-PCI
uhci0 at pci0:0:29:0: class=0x0c0300 card=0x346c8086 chip=0x26888086 rev=0x09 hdr=0x00
class = serial bus
subclass = USB
uhci1 at pci0:0:29:1: class=0x0c0300 card=0x346c8086 chip=0x26898086 rev=0x09 hdr=0x00
class = serial bus
subclass = USB
uhci2 at pci0:0:29:2: class=0x0c0300 card=0x346c8086 chip=0x268a8086 rev=0x09 hdr=0x00
class = serial bus
subclass = USB
uhci3 at pci0:0:29:3: class=0x0c0300 card=0x346c8086 chip=0x268b8086 rev=0x09 hdr=0x00
class = serial bus
subclass = USB
ehci0 at pci0:0:29:7: class=0x0c0320 card=0x346c8086 chip=0x268c8086 rev=0x09 hdr=0x00
class = serial bus
subclass = USB
pcib12 at pci0:0:30:0: class=0x060401 card=0x346c8086 chip=0x244e8086 rev=0xd9 hdr=0x01
class = bridge
subclass = PCI-PCI
isab0 at pci0:0:31:0: class=0x060100 card=0x346c8086 chip=0x26708086 rev=0x09 hdr=0x00
class = bridge
subclass = PCI-ISA
atapci0 at pci0:0:31:1: class=0x01018a card=0x346c8086 chip=0x269e8086 rev=0x09 hdr=0x00
class = mass storage
subclass = ATA
atapci1 at pci0:0:31:2: class=0x01018f card=0x346c8086 chip=0x26808086 rev=0x09 hdr=0x00
class = mass storage
subclass = ATA
none1 at pci0:0:31:3: class=0x0c0500 card=0x346c8086 chip=0x269b8086 rev=0x09 hdr=0x00
class = serial bus
subclass = SMBus
pcib2 at pci0:1:0:0: class=0x060400 card=0x346c8086 chip=0x35008086 rev=0x01 hdr=0x01
class = bridge
subclass = PCI-PCI
pcib6 at pci0:1:0:3: class=0x060400 card=0x346c8086 chip=0x350c8086 rev=0x01 hdr=0x01
class = bridge
subclass = PCI-PCI
pcib3 at pci0:2:0:0: class=0x060400 card=0x346c8086 chip=0x35108086 rev=0x01 hdr=0x01
class = bridge
subclass = PCI-PCI
pcib4 at pci0:2:1:0: class=0x060400 card=0x346c8086 chip=0x35148086 rev=0x01 hdr=0x01
class = bridge
subclass = PCI-PCI
pcib5 at pci0:2:2:0: class=0x060400 card=0x346c8086 chip=0x35188086 rev=0x01 hdr=0x01
class = bridge
subclass = PCI-PCI
mpt0 at pci0:3:0:0: class=0x010000 card=0x35058086 chip=0x00621000 rev=0x04 hdr=0x00
class = mass storage
subclass = SCSI
em0 at pci0:5:0:0: class=0x020000 card=0x346c8086 chip=0x10968086 rev=0x01 hdr=0x00
class = network
subclass = ethernet
em1 at pci0:5:0:1: class=0x020000 card=0x346c8086 chip=0x10968086 rev=0x01 hdr=0x00
class = network
subclass = ethernet
vgapci0 at pci0:12:12:0: class=0x030000 card=0x346c8086 chip=0x515e1002 rev=0x02 hdr=0x00
class = display
subclass = VGA
-------------- next part --------------
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-RELEASE #0: Fri May 1 08:49:13 UTC 2009
root at walker.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU E5405 @ 2.00GHz (2004.98-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x1067a Stepping = 10
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x40ce33d<SSE3,DTES64,MON,DS_CPL,VMX,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,XSAVE>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 4
real memory = 2143289344 (2044 MB)
avail memory = 2081705984 (1985 MB)
ACPI APIC Table: <INTEL S5000PAL>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
lapic0: Forcing LINT1 to edge trigger
kbd1 at kbdmux0
acpi0: <INTEL S5000PAL> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xca2,0xca3,0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib3
mpt0: <LSILogic SAS/SATA Adapter> port 0x3000-0x30ff mem 0xb8940000-0xb8943fff,0xb8900000-0xb893ffff irq 16 at device 0.0 on pci3
mpt0: unable to map registers in PIO mode
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci2
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 2.0 on pci2
pci5: <ACPI PCI bus> on pcib5
em0: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0x2020-0x203f mem 0xb8820000-0xb883ffff,0xb8400000-0xb87fffff irq 18 at device 0.0 on pci5
em0: Using MSI interrupt
em0: [FILTER]
em0: Ethernet address: 00:15:17:aa:8f:a8
em1: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0x2000-0x201f mem 0xb8800000-0xb881ffff,0xb8000000-0xb83fffff irq 19 at device 0.1 on pci5
em1: Using MSI interrupt
em1: [FILTER]
em1: Ethernet address: 00:15:17:aa:8f:a9
pcib6: <ACPI PCI-PCI bridge> at device 0.3 on pci1
pci6: <ACPI PCI bus> on pcib6
pcib7: <PCI-PCI bridge> at device 3.0 on pci0
pci7: <PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci8: <ACPI PCI bus> on pcib8
pcib9: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci9: <ACPI PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci10: <ACPI PCI bus> on pcib10
pcib11: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci11: <ACPI PCI bus> on pcib11
pci0: <base peripheral> at device 8.0 (no driver attached)
uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port 0x4080-0x409f irq 23 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 631XESB/632XESB/3100 USB controller USB-1> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port 0x4060-0x407f irq 22 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 631XESB/632XESB/3100 USB controller USB-2> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port 0x4040-0x405f irq 23 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <Intel 631XESB/632XESB/3100 USB controller USB-3> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 631XESB/632XESB/3100 USB controller USB-4> port 0x4020-0x403f irq 22 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb3: <Intel 631XESB/632XESB/3100 USB controller USB-4> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xb8c00400-0xb8c007ff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 63XXESB USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
pcib12: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci12: <ACPI PCI bus> on pcib12
vgapci0: <VGA-compatible display> port 0x1000-0x10ff mem 0xb0000000-0xb7ffffff,0xb8b00000-0xb8b0ffff irq 17 at device 12.0 on pci12
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 63XXESB2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x40b0-0x40bf irq 20 at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
atapci1: <Intel 63XXESB2 SATA300 controller> port 0x40c8-0x40cf,0x40e4-0x40e7,0x40c0-0x40c7,0x40e0-0x40e3,0x40a0-0x40af mem 0xb8c00000-0xb8c003ff irq 20 at device 31.2 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
sio1: [FILTER]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse Explorer, device ID 4
cpu0: <ACPI CPU> on acpi0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
p4tcc3: <CPU Frequency Thermal Control> on cpu3
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xcf000-0xcffff,0xd0000-0xd0fff pnpid ORM0000 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc0dfab28
GEOM_LABEL: Label for provider md0 is ufsid/49fabd23737484d9.
acd0: DVDR <Optiarc DVD RW AD-7560A/DX06> at ata0-slave UDMA33
lapic1: Forcing LINT1 to edge trigger
SMP: AP CPU #1 Launched!
lapic3: Forcing LINT1 to edge trigger
SMP: AP CPU #3 Launched!
lapic2: Forcing LINT1 to edge trigger
SMP: AP CPU #2 Launched!
GEOM_LABEL: Label for provider acd0 is iso9660/FreeBSD_Install.
Trying to mount root from ufs:/dev/md0
GEOM_LABEL: Label ufsid/49fabd23737484d9 removed.
More information about the freebsd-bugs
mailing list