bug report (snd_hda.ko)
Stephan Oliver Platz
s.platz_berlin at yahoo.de
Thu Jul 30 16:26:56 UTC 2009
Hi BSD-developers!
I want to report a bug in the snd_hda.ko which was delivered with PC-BSD 7.1. I use a notebook (Fujitsu Siemens Amilo LA 1703) and the sound worked well with snd_hda of version 7.0. The new driver snd_hda of version 7.1 does not work at all. I add my hardware report. (I copied the snd_hda.ko of FreeBSD 7.0 into /boot/kernel and solved the problem by using the outdated driver).
Thank you!
Best regards,
S. O. Platz (Berlin, Germany)
-------------- next part --------------
PC-BSD 7.1 Diagnostic Sheet
Generated: So 26 Jul 2009 23:16:24 CEST
-----------------Dmesg Output-------------------------
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-PRERELEASE #10: Wed Apr 1 10:14:22 EDT 2009
root at pcbsdx32-7:/usr/obj/pcbsd-build71/cvs/7.1-src/sys/PCBSD
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Turion(tm) 64 X2 Mobile Technology TL-50 (1600.07-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x40f82 Stepping = 2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x2001<SSE3,CX16>
AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8>
Cores per package: 2
real memory = 938016768 (894 MB)
avail memory = 903995392 (862 MB)
ACPI APIC Table: <PTLTD APIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 0.3> irqs 0-23 on motherboard
ioapic1 <Version 0.3> irqs 24-47 on motherboard
kbd1 at kbdmux0
acpi0: <FSC PC> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x1> port 0x62,0x66 on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> mem 0xc0000000-0xcfffffff,0xd8000000-0xd8ffffff irq 16 at device 0.0 on pci1
pcib2: <ACPI PCI-PCI bridge> irq 27 at device 2.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 31 at device 3.0 on pci0
pci3: <ACPI PCI bus> on pcib3
atapci0: <VIA 8237A SATA150 controller> port 0x4cb0-0x4cb7,0x4ca4-0x4ca7,0x4ca8-0x4caf,0x4ca0-0x4ca3,0x4c80-0x4c8f,0x4400-0x44ff irq 21 at device 15.0 on pci0
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
atapci1: <VIA 8237A UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x4c90-0x4c9f at device 15.1 on pci0
ata0: <ATA channel 0> on atapci1
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci1
ata1: [ITHREAD]
uhci0: <VIA 83C572 USB controller> port 0x4c00-0x4c1f irq 20 at device 16.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0x4c20-0x4c3f irq 22 at device 16.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0x4c40-0x4c5f irq 21 at device 16.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0x4c60-0x4c7f irq 23 at device 16.3 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xd9300000-0xd93000ff irq 21 at device 16.4 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <VIA VT6202 USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
ugen0: <vendor 0x0bf8 product 0x100f, class 0/0, rev 2.00/3.00, addr 2> on uhub4
ugen0: setting configuration index 0 failed
device_attach: ugen0 attach returned 6
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0x4800-0x48ff mem 0xd9300400-0xd93004ff irq 23 at device 18.0 on pci0
vr0: Quirks: 0x0
vr0: Revision: 0x7c
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:a0:d1:c4:8f:2f
vr0: [ITHREAD]
pcib4: <ACPI PCI-PCI bridge> at device 19.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pci4: <multimedia, HDA> at device 1.0 (no driver attached)
pcib5: <ACPI PCI-PCI bridge> at device 19.1 on pci0
pci5: <ACPI PCI bus> on pcib5
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> flags 0x1000 irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0
cpu0: <ACPI CPU> on acpi0
powernow0: <PowerNow! K8> on cpu0
cpu1: <ACPI CPU> on acpi0
powernow1: <PowerNow! K8> on cpu1
pmtimer0 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: <Genius Optical Mouse, class 0/0, rev 1.10/1.07, addr 2> on uhub0
ums0: 3 buttons and Z dir.
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert enabled, nat loadable, rule-based forwarding disabled, default to accept, logging disabled
acd0: DVDR <Optiarc DVD RW AD-7540A/1.42> at ata1-master UDMA33
ad0: 114473MB <WDC WD1200BEVS-07LAT0 01.06M01> at ata2-master SATA150
SMP: AP CPU #1 Launched!
GEOM_LABEL: Label for provider ad0s4 is msdosfs/ .
Trying to mount root from ufs:/dev/ad0s2a
(probe0:ata1:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:ata1:0:0:0): CAM Status: SCSI Status Error
(probe0:ata1:0:0:0): SCSI Status: Check Condition
(probe0:ata1:0:0:0): NOT READY asc:3a,0
(probe0:ata1:0:0:0): Medium not present
(probe0:ata1:0:0:0): Unretryable error
cd0 at ata1 bus 0 target 0 lun 0
cd0: <Optiarc DVD RW AD-7540A 1.42> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
hdac0: <VIA VT8251/8237A High Definition Audio Controller> mem 0xd9000000-0xd9003fff irq 17 at device 1.0 on pci4
hdac0: HDA Driver Revision: 20090131_0127
hdac0: [ITHREAD]
hdac0: HDA Codec #0: VIA VT1708_8
hdac0: HDA Codec #1: Unknown Codec
pcm0: <HDA VIA VT1708_8 PCM #0 Analog> at cad 0 nid 1 on hdac0
pid 3339 (nepomukservicestub), uid 1001: exited on signal 6
pid 3372 (nepomukservicestub), uid 1001: exited on signal 6
WARNING: attempt to net_add_domain(netgraph) after domainfinalize()
-----------------Messages Output----------------------
Jul 26 22:59:31 pcbsd savecore: no dumps found
Jul 26 22:59:32 pcbsd kernel: hdac0: <VIA VT8251/8237A High Definition Audio Controller> mem 0xd9000000-0xd9003fff irq 17 at device 1.0 on pci4
Jul 26 22:59:32 pcbsd kernel: hdac0: HDA Driver Revision: 20090131_0127
Jul 26 22:59:32 pcbsd kernel: hdac0: [ITHREAD]
Jul 26 22:59:32 pcbsd kernel: hdac0: HDA Codec #0: VIA VT1708_8
Jul 26 22:59:32 pcbsd kernel: hdac0: HDA Codec #1: Unknown Codec
Jul 26 22:59:32 pcbsd kernel: pcm0: <HDA VIA VT1708_8 PCM #0 Analog> at cad 0 nid 1 on hdac0
Jul 26 23:02:02 pcbsd kernel: pid 3339 (nepomukservicestub), uid 1001: exited on signal 6
Jul 26 23:04:46 pcbsd kernel: pid 3372 (nepomukservicestub), uid 1001: exited on signal 6
Jul 26 23:11:50 pcbsd su: john to root on /dev/ttyp1
Jul 26 23:12:16 pcbsd last message repeated 3 times
Jul 26 23:13:12 pcbsd kernel: WARNING: attempt to net_add_domain(netgraph) after domainfinalize()
Jul 26 23:13:14 pcbsd ppp[10336]: Warning: deflink: Reducing configured MRU from 1500 to 1492
Jul 26 23:13:15 pcbsd ppp[10336]: Warning: 0.0.0.0/0: Change route failed: errno: No such process
Jul 26 23:13:15 pcbsd ppp[10336]: Warning: ff02:5::/32: Change route failed: errno: Network is unreachable
Jul 26 23:13:36 pcbsd su: john to root on /dev/ttyp1
Jul 26 23:13:36 pcbsd su: john to root on /dev/ttyp1
Jul 26 23:15:19 pcbsd last message repeated 2 times
Jul 26 23:16:15 pcbsd ppp[10336]: Warning: 0.0.0.0/0: Change route failed: errno: No such process
Jul 26 23:16:15 pcbsd ppp[10336]: Warning: ff02:5::/32: Change route failed: errno: Network is unreachable
------------------pciconf-----------------------------
hostb0 at pci0:0:0:0: class=0x060000 card=0x03361106 chip=0x03361106 rev=0x00 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'K8M890CE Host Bridge'
class = bridge
subclass = HOST-PCI
hostb1 at pci0:0:0:1: class=0x060000 card=0x00000000 chip=0x13361106 rev=0x00 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'K8M890CE Host Bridge'
class = bridge
subclass = HOST-PCI
hostb2 at pci0:0:0:2: class=0x060000 card=0x00000000 chip=0x23361106 rev=0x00 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'K8M890CE Host Bridge'
class = bridge
subclass = HOST-PCI
hostb3 at pci0:0:0:3: class=0x060000 card=0x00000000 chip=0x33361106 rev=0x00 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'K8M890CE Host Bridge'
class = bridge
subclass = HOST-PCI
hostb4 at pci0:0:0:4: class=0x060000 card=0x00000000 chip=0x43361106 rev=0x00 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'K8M890CE Host Bridge'
class = bridge
subclass = HOST-PCI
ioapic0 at pci0:0:0:5: class=0x080020 card=0x00000000 chip=0x53361106 rev=0x00 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'K8M890CE I/O APIC Interrupt Controller'
class = base peripheral
subclass = interrupt controller
hostb5 at pci0:0:0:7: class=0x060000 card=0x00000000 chip=0x73361106 rev=0x00 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'K8M890CE Host Bridge'
class = bridge
subclass = HOST-PCI
pcib1 at pci0:0:1:0: class=0x060400 card=0x00000000 chip=0xb1881106 rev=0x00 hdr=0x01
vendor = 'VIA Technologies Inc'
device = 'VT8237 K8HTB CPU to AGP 2.0/3.0 Bridge'
class = bridge
subclass = PCI-PCI
pcib2 at pci0:0:2:0: class=0x060400 card=0x00000000 chip=0xa2381106 rev=0x00 hdr=0x01
vendor = 'VIA Technologies Inc'
device = 'K8T890 PCI-to-PCI Bridge'
class = bridge
subclass = PCI-PCI
pcib3 at pci0:0:3:0: class=0x060400 card=0x00000000 chip=0xc2381106 rev=0x00 hdr=0x01
vendor = 'VIA Technologies Inc'
device = 'K8T890 PCI-to-PCI Bridge'
class = bridge
subclass = PCI-PCI
atapci0 at pci0:0:15:0: class=0x01018f card=0x10d91734 chip=0x05911106 rev=0x80 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT8237A VIA VT8237A SATA RAID Controller'
class = mass storage
subclass = ATA
atapci1 at pci0:0:15:1: class=0x01018a card=0x10d91734 chip=0x05711106 rev=0x07 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT82C586A/B/VT82C686/A/B/VT823x/A/C Bus Master IDE Controller'
class = mass storage
subclass = ATA
uhci0 at pci0:0:16:0: class=0x0c0300 card=0x30381106 chip=0x30381106 rev=0xa0 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT83C572, VT6202 VIA Rev 5 or later USB Universal Host Controller'
class = serial bus
subclass = USB
uhci1 at pci0:0:16:1: class=0x0c0300 card=0x30381106 chip=0x30381106 rev=0xa0 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT83C572, VT6202 VIA Rev 5 or later USB Universal Host Controller'
class = serial bus
subclass = USB
uhci2 at pci0:0:16:2: class=0x0c0300 card=0x30381106 chip=0x30381106 rev=0xa0 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT83C572, VT6202 VIA Rev 5 or later USB Universal Host Controller'
class = serial bus
subclass = USB
uhci3 at pci0:0:16:3: class=0x0c0300 card=0x30381106 chip=0x30381106 rev=0xa0 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT83C572, VT6202 VIA Rev 5 or later USB Universal Host Controller'
class = serial bus
subclass = USB
ehci0 at pci0:0:16:4: class=0x0c0320 card=0x31041106 chip=0x31041106 rev=0x86 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT6202/12 USB 2.0 Enhanced Host Controller'
class = serial bus
subclass = USB
isab0 at pci0:0:17:0: class=0x060100 card=0x32371106 chip=0x33371106 rev=0x00 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT8237A Standard PCI to ISA Bridge'
class = bridge
subclass = PCI-ISA
hostb6 at pci0:0:17:7: class=0x060000 card=0x337e1106 chip=0x287e1106 rev=0x00 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT8251 Ultra VLINK Controller'
class = bridge
subclass = HOST-PCI
vr0 at pci0:0:18:0: class=0x020000 card=0x10d91734 chip=0x30651106 rev=0x7c hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT6102 Rhine II PCI Fast Ethernet Controller||Used by GERICOM in laptop Webengine Advanced'
class = network
subclass = ethernet
pcib4 at pci0:0:19:0: class=0x060400 card=0x337b1106 chip=0x337b1106 rev=0x00 hdr=0x01
vendor = 'VIA Technologies Inc'
device = 'VT8237A Standard PCI to PCIe Bridge'
class = bridge
subclass = PCI-PCI
pcib5 at pci0:0:19:1: class=0x060401 card=0x337a1106 chip=0x337a1106 rev=0x00 hdr=0x01
vendor = 'VIA Technologies Inc'
device = 'VT8237A Standard PCI to PCI Bridge'
class = bridge
subclass = PCI-PCI
hostb7 at pci0:0:24:0: class=0x060000 card=0x00000000 chip=0x11001022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = '(K8) Athlon 64/Opteron HyperTransport Technology Configuration'
class = bridge
subclass = HOST-PCI
hostb8 at pci0:0:24:1: class=0x060000 card=0x00000000 chip=0x11011022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = '(K8) Athlon 64/Opteron Address Map'
class = bridge
subclass = HOST-PCI
hostb9 at pci0:0:24:2: class=0x060000 card=0x00000000 chip=0x11021022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = '(K8) Athlon 64/Opteron DRAM Controller'
class = bridge
subclass = HOST-PCI
hostb10 at pci0:0:24:3: class=0x060000 card=0x00000000 chip=0x11031022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = '(K8) Athlon 64/Opteron Miscellaneous Control'
class = bridge
subclass = HOST-PCI
vgapci0 at pci0:1:0:0: class=0x030000 card=0x10d91734 chip=0x32301106 rev=0x01 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'K8N890CE Display Driver Integrated Graphics'
class = display
subclass = VGA
hdac0 at pci0:4:1:0: class=0x040300 card=0x10d91734 chip=0x32881106 rev=0x10 hdr=0x00
vendor = 'VIA Technologies Inc'
device = '??? VIA VT8251/8237A High Definition Audio Controller - HDA Codec Realtek ALC660'
class = multimedia
subclass = HDA
------------------xorg.conf---------------------------
# Xorg.conf file generated for PC-BSD
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
Option "Clone" "off"
EndSection
Section "ServerFlags"
Option "AutoAddDevices" "False"
Option "AllowEmptyInput" "Off"
EndSection
Section "Files"
ModulePath "/PCBSD/local/lib/xorg/modules"
FontPath "/Programs/fonts/"
FontPath "/PCBSD/local/lib/X11/fonts/cyrillic/"
FontPath "/PCBSD/local/lib/X11/fonts/TrueType/"
FontPath "/PCBSD/local/lib/X11/fonts/webfonts/"
FontPath "/PCBSD/local/lib/X11/fonts/misc/"
FontPath "/PCBSD/local/lib/X11/fonts/TTF/"
FontPath "/PCBSD/local/lib/X11/fonts/Type1/"
FontPath "/PCBSD/local/lib/X11/fonts/CID/"
FontPath "/PCBSD/local/lib/X11/fonts/75dpi/"
FontPath "/PCBSD/local/lib/X11/fonts/100dpi/"
FontPath "/PCBSD/local/lib/X11/fonts/dejavu/"
FontPath "/PCBSD/local/lib/X11/fonts/local/"
EndSection
Section "Module"
Load "ddc"
Load "dbe"
Load "extmod"
Load "xtrap"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
Option "XkbVariant" ""
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/sysmouse"
Option "Buttons" "6"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
Identifier "Card0"
Screen 0
Driver "vesa"
VendorName "Generic Vesa Driver"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x800"
EndSubSection
EndSection
------------------RC File-----------------------------
background_dhclient="YES"
compat5x_enable="YES"
sshd_enable="YES"
usbd_enable="YES"
# Disable Moused by default. Xorg sets up the mouse automatically, and moused can conflict with it.
moused_type="auto"
moused_enable="YES"
devd_enable="YES"
devfs_system_ruleset="devfsrules_common"
sendmail_enable="NO"
sendmail_rebuild_aliases="YES"
ldconfig_paths="/usr/lib/compat /usr/local/lib /usr/local/kde4/lib /usr/local/lib/compat/pkg"
# Enable the pcbsd startup / shutdown scripts
pcbsdinit_enable="YES"
#Enable samba server
samba_enable="YES"
# Disable LPD
lpd_enable="NO"
# Enable CUPS
cupsd_enable="YES"
linux_enable="YES"
# FSCK Enhancements
fsck_y_enable="YES"
background_fsck="NO"
# tmpmfs Flags
tmpmfs="YES"
tmpsize="800m"
tmpmfs_flags="-S"
clear_tmp="YES"
# Denyhosts Startup
denyhosts_enable="YES"
# powerd: adaptive speed while on AC power, adaptive while on battery power
powerd_enable="YES"
powerd_flags="-a adaptive -b adaptive" # set CPU frequency
# enable HALd
dbus_enable="YES"
polkitd_enable="YES"
hald_enable="YES"
# Enables support for HPLIP
hpiod_enable="NO"
hpssd_enable="NO"
# ntpdate is deprecated and will eventually be removed from the distribution since
# the same functionality is available in ntpd(8).
# Without "ntpd_sync_on_start" option, ntpd refuses to perform an
# initial correction if the clock offset is too large.
#
ntpd_sync_on_start="YES"
# Enable the firewall
pf_rules="/etc/pf.conf"
pf_enable="YES"
pf_flags=""
# Enable ipfw and open it by default since we have PF
firewall_enable="YES"
firewall_type="open"
snddetect_enable="YES"
mixer_enable="YES"
hostname="pcbsd"
ifconfig_vr0="DHCP"
ppp_enable="YES"
ppp_mode="background"
ppp_nat="NO"
ppp_profile="Arcor"
------------------Loader File-------------------------
linux_load="YES"
ulpt_load="YES"
#vesa_load="YES"
#splash_pcx_load="YES"
#bitmap_load="YES"
#bitmap_name="/boot/loading-screen.pcx"
hw.ata.atapi_dma="1"
autoboot_delay="5"
kern.ipc.shmseg=1024
kern.ipc.shmmni=1024
legal.intel_iwi.license_ack=1
legal.intel_wpi.license_ack=1
wpi_load="YES"
------------------Free Space--------------------------
Filesystem 1M-blocks Used Avail Capacity Mounted on
/dev/ad0s2a 21322 7007 12609 36% /
devfs 0 0 0 100% /dev
linprocfs 0 0 0 100% /compat/linux/proc
procfs 0 0 0 100% /proc
/dev/md0 771 0 709 0% /tmp
------------------System Processes--------------------
last pid: 12370; load averages: 0.46, 0.39, 0.30 up 0+00:17:48 23:16:24
136 processes: 1 running, 135 sleeping
Mem: 234M Active, 318M Inact, 84M Wired, 5420K Cache, 98M Buf, 223M Free
Swap: 512M Total, 512M Free
PID USERNAME THR PRI NICE SIZE RES STATE C TIME WCPU COMMAND
3155 john 1 48 0 74264K 35956K select 0 0:42 6.88% kded4
10635 root 1 48 0 68408K 30312K select 1 0:07 6.88% kded4
2880 root 1 45 0 191M 183M select 1 0:35 1.07% Xorg
3350 john 3 44 0 250M 59304K ucond 0 0:00 0.29% plasma
11715 root 1 96 0 70708K 36220K select 1 0:02 0.20% kcmshell4
3416 john 1 96 0 62112K 25112K select 0 0:03 0.10% NetworkTray
3363 john 1 44 0 49160K 31828K select 1 0:05 0.00% nepomukservicestub
1163 haldaemon 1 44 0 6768K 4284K select 1 0:04 0.00% hald
3422 john 1 44 0 62128K 27556K select 0 0:03 0.00% kmix
3309 john 1 44 0 57216K 25652K select 0 0:02 0.00% kwin
3421 john 1 44 0 66164K 29780K select 1 0:01 0.00% SystemUpdaterTray
3401 john 1 44 0 87256K 42500K select 1 0:01 0.00% python
457 root 1 44 0 3268K 1056K select 1 0:01 0.00% moused
900 root 1 8 0 3464K 1416K wait 1 0:01 0.00% sh
3138 john 1 44 0 3336K 2084K select 0 0:01 0.00% dbus-daemon
3412 john 1 44 0 54264K 22080K select 1 0:00 0.00% klipper
941 root 1 44 0 3184K 1004K select 1 0:00 0.00% powerd
5078 john 1 44 0 40064K 24936K select 1 0:00 0.00% nepomukservicestub
More information about the freebsd-bugs
mailing list