kern/130726: DMA errors accessing multiple SATA channels
Rong-En Fan
rafan at infor.org
Sun Jan 18 20:10:03 PST 2009
The following reply was made to PR kern/130726; it has been noted by GNATS.
From: Rong-En Fan <rafan at infor.org>
To: freebsd-gnats-submit at freebsd.org
Cc:
Subject: Re: kern/130726: DMA errors accessing multiple SATA channels
Date: Mon, 19 Jan 2009 11:48:53 +0800
For the record, I believe I'm seeing the same thing with today's
CURRENT. I can trigger the machine crash by copying data from ad2
to ad0.
For what it worth, back in 7.x, I can reliability trigger machine
hang/crash if I access the 2nd disk extensively. It may or may not
related to this issue though.
= atacontrol =
$ atacontrol info ata0
Master: ad0 <WDC WD6400AAKS-22A7B0/01.03B01> Serial ATA II
Slave: no device present
$ atacontrol info ata1
Master: ad2 <WDC WD5000AAKS-00YGA0/12.01C02> Serial ATA II
Slave: no device present
= pciconf =
atapci0 at pci0:0:31:2: class=0x01018a card=0x101517aa chip=0x27c08086
rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82801GB/GR/GH (ICH7 Family) Serial ATA Storage
Controller'
class = mass storage
subclass = ATA
= dmesg =
atapci0: <Intel ICH7 SATA300 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x18b0-0x18bf at device 31.2 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x18b0
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 50
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata1: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=50 stat1=00 devices=0x1
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 51
ata1: [MPSAFE]
ata1: [ITHREAD]
[...]
ata0: identify ch->devices=00000001
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad0: 610480MB <WDC WD6400AAKS-22A7B0 01.03B01> at ata0-master SATA150
ad0: 1250263728 sectors [1240341C/16H/63S] 16 sectors/interrupt 1 depth queue
ata1: identify ch->devices=00000001
GEOM: new disk ad0
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad2: 476940MB <WDC WD5000AAKS-00YGA0 12.01C02> at ata1-master SATA150
ad2: 976773168 sectors [969021C/16H/63S] 16 sectors/interrupt 1 depth queue
More information about the freebsd-bugs
mailing list