misc/133872: SATA300 controlled as SATA150 on ICH7R mobo
Tinus Blaauw
tinus at nanodog.org
Mon Apr 20 11:20:04 UTC 2009
>Number: 133872
>Category: misc
>Synopsis: SATA300 controlled as SATA150 on ICH7R mobo
>Confidential: no
>Severity: non-critical
>Priority: high
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Mon Apr 20 11:20:03 UTC 2009
>Closed-Date:
>Last-Modified:
>Originator: Tinus Blaauw
>Release: AMD64 - FreeBSD 7.1-RELEASE (GENERIC) #0: Thu Jan 1 08:58:24 UTC 2009
>Organization:
None
>Environment:
FreeBSD server.nanite.local 7.1-RELEASE FreeBSD 7.1-RELEASE #0: Thu Jan 1 08:58:24 UTC 2009 root at driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64
>Description:
A very good day!
I find myself in a severe predicament. I am unable to get my SATA300 drives running at SATA300. Instead they are reported as SATA150. My setup is NOT being run as RAID, only as a normal setup with 3 hard drives, and a 4th DMA-33 drive on which the O/S is installed.
Motherboard :
MSI G31M3-F
CPU :
CPU: Pentium(R) Dual-Core CPU E5200 @ 2.50GHz (2520.67-MHz K8-class CPU)
SATA Controller:
atapci0: <SiI SiI 3114 SATA150 controller> port 0xec00-0xec07,0xe880-0xe883,0xe800-0xe807,0xe480-0xe483,0xe400-0xe40f mem 0xfebffc00-0xfebfffff irq 16 at device 0.0 on pci3 [No drives connected to this PCI Card]
AND
atapci2: <Intel ICH7 SATA300 controller> port 0xc080-0xc087,0xc000-0xc003,0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb80f irq 19 at device 31.2 on pci0 [All 3 hard drives connected to this on-board controller]
Hard Drives :
ad12: 343399MB <Seagate ST3360320AS 3.AAM> at ata6-master SATA150
ad13: 305245MB <WDC WD3200AAKS-00SBA0 12.01B01> at ata6-slave SATA150
ad14: 953869MB <WDC WD1001FALS-00J7B0 05.00K05> at ata7-master SATA150
Thank you so kindly for any/all help!
Regards
Tinus
>How-To-Repeat:
Same hardware as above - unconfirmed though.
>Fix:
None known.
>Release-Note:
>Audit-Trail:
>Unformatted:
More information about the freebsd-bugs
mailing list