kern/122572: [install] FreeBSD 7.0 doesn't install on Dell
PowerEdge SC1435
Mel
mel.xyzzy at rachie.is-a-geek.net
Tue May 13 13:10:03 UTC 2008
The following reply was made to PR kern/122572; it has been noted by GNATS.
From: Mel <mel.xyzzy at rachie.is-a-geek.net>
To: bug-followup at freebsd.org,
felipe at neuwald.biz
Cc:
Subject: Re: kern/122572: [install] FreeBSD 7.0 doesn't install on Dell PowerEdge SC1435
Date: Tue, 13 May 2008 15:05:25 +0200
Below is the verbose boot under 6.3-p1.
ACPI aml is at:
http://freebsd.pastebin.org/35656
There's a second bootable slice waiting to be formatted for 7-stable, if
someone wants to pick it up. I don't know for how long the machine is
available for non-production work.
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.3-RELEASE-p2 #0: Fri May 9 00:52:47 AKDT 2008
mdev at smell:/home/mdev/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80b31000.
Calibrating clock(s) ... i8254 clock: 1193199 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1800073149 Hz
CPU: Dual-Core AMD Opteron(tm) Processor 2210 (1800.07-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x40f13 Stepping = 3
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x2001<SSE3,CX16>
AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8>
Cores per package: 2
L1 2MB data TLB: 8 entries, fully associative
L1 2MB instruction TLB: 8 entries, fully associative
L1 4KB data TLB: 32 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 2MB unified TLB: 0 entries, disabled/not present
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
real memory = 2146402304 (2046 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009ffff, 651264 bytes (159 pages)
0x0000000000c2e000 - 0x000000007c2affff, 2070421504 bytes (505474 pages)
avail memory = 2060357632 (1964 MB)
ACPI APIC Table: <DELL PE_SC3 >
APIC: CPU 0 has ACPI ID 1
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 2
ioapic0: Routing external 8259A's -> intpin 0
MADT: Found IO APIC ID 3, Interrupt 32 at 0xfec01000
ioapic1: Changing APIC ID to 3
ioapic1: WARNING: intbase 32 != expected base 16
MADT: Found IO APIC ID 4, Interrupt 64 at 0xfec02000
ioapic2: Changing APIC ID to 4
ioapic2: WARNING: intbase 64 != expected base 48
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
MADT: Ignoring local NMI routed to ACPI CPU 3
MADT: Ignoring local NMI routed to ACPI CPU 4
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0: intpin 9 polarity: low
ioapic0: intpin 9 trigger: level
ioapic0 <Version 1.1> irqs 0-15 on motherboard
ioapic1 <Version 1.1> irqs 32-47 on motherboard
ioapic2 <Version 1.1> irqs 64-79 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x0001000f pcm: 0x00010000
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
io: <I/O>
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (May 9 2008 00:52:29)
rr232x: RocketRAID 232x controller driver v1.02 (May 9 2008 00:52:31)
acpi0: <DELL PE_SC3> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
acpi0: Power Button (fixed)
AcpiOsDerivePciId: \\_SB_.PCI0.PCIR.CNFG -> bus 0 dev 24 func 1
ACPI timer: 0/3 0/3 0/3 0/3 0/4 0/3 0/3 0/4 0/4 0/3 -> 0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 6 N 0 3 4 5 6 7 10 11
Validation 0 6 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 3 4 5 6 7 10 11
Validation 0 5 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 6 N 0 3 4 5 6 7 10 11
Validation 0 6 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 3 4 5 6 7 10 11
Validation 0 5 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 5 6 7 10 11
Validation 0 10 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link8: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link9: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link10: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link11: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link12: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 5 6 7 10 11
Validation 0 10 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link13: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link14: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link15: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link16: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link17: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link18: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link19: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link20: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link21: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link22: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link23: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link24: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link25: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link26: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link27: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link28: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link29: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link30: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link31: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link32: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 6 7 10 11 12 14
Validation 0 11 N 0 3 4 5 6 7 10 11 12 14
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14
pci_link33: Index IRQ Rtd Ref IRQs
Initial Probe 0 6 N 0 3 4 5 6 7 10 11 12 14
Validation 0 6 N 0 3 4 5 6 7 10 11 12 14
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: vend: 0x1166 rev: 0x1 num: 9 hz: 14318180 opts: leg_route
count_size
Timecounter "HPET" frequency 14318180 Hz quality 900
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI: Found matching pin for 0.3.INTA at func 0: 11
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x1166, dev=0x0036, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0205, revid=0x00
bus=0, slot=2, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0147, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0214, revid=0x00
bus=0, slot=2, func=1
class=01-01-8a, hdrtype=0x00, mfdev=1
cmdreg=0x0155, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 000008c0, size 4, enabled
found-> vendor=0x1166, dev=0x0234, revid=0x00
bus=0, slot=2, func=2
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0147, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0223, revid=0x01
bus=0, slot=3, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0157, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base efbed000, size 12, enabled
map[14]: type 4, range 32, base 0000d000, size 8, enabled
pcib0: matched entry for 0.3.INTA (src \\_SB_.LK01:0)
ioapic0: Changing trigger for pin 11 to level
ioapic0: Changing polarity for pin 11 to low
pcib0: slot 3 INTA routed to irq 11 via \\_SB_.LK01
found-> vendor=0x1166, dev=0x0223, revid=0x01
bus=0, slot=3, func=1
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0157, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base efbee000, size 12, enabled
map[14]: type 4, range 32, base 0000d400, size 8, enabled
pcib0: matched entry for 0.3.INTA (src \\_SB_.LK01:0)
pcib0: slot 3 INTA routed to irq 11 via \\_SB_.LK01
found-> vendor=0x1166, dev=0x0223, revid=0x01
bus=0, slot=3, func=2
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0157, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base efbef000, size 12, enabled
map[14]: type 4, range 32, base 0000d800, size 8, enabled
pcib0: matched entry for 0.3.INTA (src \\_SB_.LK01:0)
pcib0: slot 3 INTA routed to irq 11 via \\_SB_.LK01
found-> vendor=0x1002, dev=0x515e, revid=0x02
bus=0, slot=4, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0187, statreg=0x0290, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 3, range 32, base e0000000, size 27, enabled
map[14]: type 4, range 32, base 0000dc00, size 8, enabled
map[18]: type 1, range 32, base efbf0000, size 16, enabled
pcib0: matched entry for 0.4.INTA
pcib0: slot 4 INTA hardwired to IRQ 44
found-> vendor=0x1166, dev=0x0140, revid=0xa2
bus=0, slot=7, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=6
powerspec 3 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
pcib0: matched entry for 0.7.INTA
pcib0: slot 7 INTA hardwired to IRQ 32
found-> vendor=0x1166, dev=0x0142, revid=0xa2
bus=0, slot=8, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 3 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
pcib0: matched entry for 0.8.INTA
pcib0: slot 8 INTA hardwired to IRQ 33
found-> vendor=0x1166, dev=0x0144, revid=0xa2
bus=0, slot=9, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
pcib0: matched entry for 0.9.INTA
pcib0: slot 9 INTA hardwired to IRQ 37
found-> vendor=0x1166, dev=0x0142, revid=0xa2
bus=0, slot=10, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=6
powerspec 3 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
pcib0: matched entry for 0.10.INTA
pcib0: slot 10 INTA hardwired to IRQ 35
found-> vendor=0x1166, dev=0x0144, revid=0xa2
bus=0, slot=11, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 3 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
pcib0: matched entry for 0.11.INTA
pcib0: slot 11 INTA hardwired to IRQ 36
found-> vendor=0x1022, dev=0x1100, revid=0x00
bus=0, slot=24, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1101, revid=0x00
bus=0, slot=24, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1102, revid=0x00
bus=0, slot=24, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1103, revid=0x00
bus=0, slot=24, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 3
pcib1: subordinate bus 4
pcib1: I/O decode 0xe000-0xefff
pcib1: memory decode 0xefc00000-0xefdfffff
pcib1: prefetched decode 0xfff00000-0xfffff
ACPI: Found matching pin for 3.14.INTA at func 0: 6
pci3: <ACPI PCI bus> on pcib1
pci3: physical bus=3
found-> vendor=0x1166, dev=0x0104, revid=0xc0
bus=3, slot=13, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0157, statreg=0x0230, cachelnsz=64 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x024b, revid=0x00
bus=3, slot=14, func=0
class=01-01-8f, hdrtype=0x00, mfdev=0
cmdreg=0x0147, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=6
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
map[10]: type 4, range 32, base 0000ecb0, size 3, enabled
pcib1: requested I/O range 0xecb0-0xecb7: in range
map[14]: type 4, range 32, base 0000eca0, size 2, enabled
pcib1: requested I/O range 0xeca0-0xeca3: in range
map[18]: type 4, range 32, base 0000ecb8, size 3, enabled
pcib1: requested I/O range 0xecb8-0xecbf: in range
map[1c]: type 4, range 32, base 0000eca4, size 2, enabled
pcib1: requested I/O range 0xeca4-0xeca7: in range
map[20]: type 4, range 32, base 0000ece0, size 4, enabled
pcib1: requested I/O range 0xece0-0xecef: in range
map[24]: type 1, range 32, base efdfe000, size 13, enabled
pcib1: requested memory range 0xefdfe000-0xefdfffff: good
pcib1: matched entry for 3.14.INTA (src \\_SB_.LK07:0)
ioapic0: Changing trigger for pin 6 to level
ioapic0: Changing polarity for pin 6 to low
pcib1: slot 14 INTA routed to irq 6 via \\_SB_.LK07
pcib2: <ACPI PCI-PCI bridge> at device 13.0 on pci3
pcib2: secondary bus 4
pcib2: subordinate bus 4
pcib2: I/O decode 0xf000-0xfff
pcib2: memory decode 0xfff00000-0xfffff
pcib2: prefetched decode 0xfff00000-0xfffff
pci4: <ACPI PCI bus> on pcib2
pci4: physical bus=4
atapci0: <ServerWorks HT1000 SATA150 controller> port
0xecb0-0xecb7,0xeca0-0xeca3,0xecb8-0xecbf,0xeca4-0xeca7,0xece0-0xecef mem
0xefdfe000-0xefdfffff irq 6 at device 14.0 on pci3
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xece0
ioapic0: routing intpin 6 (ISA IRQ 6) to vector 49
atapci0: [MPSAFE]
ata2: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xecb0
atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0xeca0
ata2: reset tp1 mask=03 ostat0=50 ostat1=00
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata2: [MPSAFE]
ata3: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0xecb8
atapci0: Reserved 0x4 bytes for rid 0x1c type 4 at 0xeca4
ata3: reset tp1 mask=03 ostat0=7f ostat1=7f
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata3: reset tp2 stat0=ff stat1=ff devices=0x0
ata3: [MPSAFE]
atapci1: <ServerWorks HT1000 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x8c0-0x8cf at device 2.1 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x8c0
ata0: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 50
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci1: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 51
ata1: [MPSAFE]
isab0: <PCI-ISA bridge> at device 2.2 on pci0
isa0: <ISA bus> on isab0
ohci0: <OHCI (generic) USB controller> port 0xd000-0xd0ff mem
0xefbed000-0xefbedfff irq 11 at device 3.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xefbed000
ohci0: (New OHCI DeviceId=0x02231166)
ioapic0: routing intpin 11 (ISA IRQ 11) to vector 52
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1: <OHCI (generic) USB controller> port 0xd400-0xd4ff mem
0xefbee000-0xefbeefff irq 11 at device 3.1 on pci0
ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xefbee000
ohci1: (New OHCI DeviceId=0x02231166)
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> port 0xd800-0xd8ff mem
0xefbef000-0xefbeffff irq 11 at device 3.2 on pci0
ehci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xefbef000
ehci0: (New EHCI DeviceId=0x02231166)
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: (0x1166) EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
uhub3: vendor 0x413c product 0xa001, class 9/0, rev 2.00/0.00, addr 2
uhub3: multiple transaction translators
uhub3: 2 ports with 2 removable, self powered
pci0: <display, VGA> at device 4.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> irq 32 at device 7.0 on pci0
pcib3: secondary bus 5
pcib3: subordinate bus 5
pcib3: I/O decode 0xf000-0xfff
pcib3: memory decode 0xfff00000-0xfffff
pcib3: prefetched decode 0xfff00000-0xfffff
pci5: <ACPI PCI bus> on pcib3
pci5: physical bus=5
pcib4: <ACPI PCI-PCI bridge> irq 33 at device 8.0 on pci0
pcib4: secondary bus 1
pcib4: subordinate bus 1
pcib4: I/O decode 0xf000-0xfff
pcib4: memory decode 0xefe00000-0xefefffff
pcib4: prefetched decode 0xfff00000-0xfffff
pci1: <ACPI PCI bus> on pcib4
pci1: physical bus=1
found-> vendor=0x14e4, dev=0x1659, revid=0x21
bus=1, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
map[10]: type 1, range 64, base efef0000, size 16, enabled
pcib4: requested memory range 0xefef0000-0xefefffff: good
pcib4: matched entry for 1.0.INTA
pcib4: slot 0 INTA hardwired to IRQ 33
bge0: <Broadcom BCM5750 C1, ASIC rev. 0x4201> mem 0xefef0000-0xefefffff irq 33
at device 0.0 on pci1
bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xefef0000
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus0
brgphy0: OUI 0x000818, model 0x0018, rev. 0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
bge0: bpf attached
bge0: Ethernet address: 00:1d:09:0a:3d:3b
ioapic1: routing intpin 1 (PCI IRQ 33) to vector 53
bge0: [MPSAFE]
pcib5: <ACPI PCI-PCI bridge> irq 37 at device 9.0 on pci0
pcib5: secondary bus 2
pcib5: subordinate bus 2
pcib5: I/O decode 0xf000-0xfff
pcib5: memory decode 0xeff00000-0xefffffff
pcib5: prefetched decode 0xfff00000-0xfffff
pci2: <ACPI PCI bus> on pcib5
pci2: physical bus=2
found-> vendor=0x14e4, dev=0x1659, revid=0x21
bus=2, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
map[10]: type 1, range 64, base efff0000, size 16, enabled
pcib5: requested memory range 0xefff0000-0xefffffff: good
pcib5: matched entry for 2.0.INTA
pcib5: slot 0 INTA hardwired to IRQ 37
bge1: <Broadcom BCM5750 C1, ASIC rev. 0x4201> mem 0xefff0000-0xefffffff irq 37
at device 0.0 on pci2
bge1: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xefff0000
miibus1: <MII bus> on bge1
brgphy1: <BCM5750 10/100/1000baseTX PHY> on miibus1
brgphy1: OUI 0x000818, model 0x0018, rev. 0
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
bge1: bpf attached
bge1: Ethernet address: 00:1d:09:0a:3d:3c
ioapic1: routing intpin 5 (PCI IRQ 37) to vector 54
bge1: [MPSAFE]
pcib6: <ACPI PCI-PCI bridge> irq 35 at device 10.0 on pci0
pcib6: secondary bus 6
pcib6: subordinate bus 6
pcib6: I/O decode 0xf000-0xfff
pcib6: memory decode 0xfff00000-0xfffff
pcib6: prefetched decode 0xfff00000-0xfffff
pci6: <ACPI PCI bus> on pcib6
pci6: physical bus=6
pcib7: <ACPI PCI-PCI bridge> irq 36 at device 11.0 on pci0
pcib7: secondary bus 7
pcib7: subordinate bus 7
pcib7: I/O decode 0xf000-0xfff
pcib7: memory decode 0xfff00000-0xfffff
pcib7: prefetched decode 0xfff00000-0xfffff
pci7: <ACPI PCI bus> on pcib7
pci7: physical bus=7
sio0: irq maps: 0x4a01 0x4a11 0x4a01 0x4a01
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 55
sio1: irq maps: 0x4a01 0x4a09 0x4a01 0x4a01
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ioapic0: routing intpin 3 (ISA IRQ 3) to vector 56
ahc_isa_probe 0: ioport 0xc00 alloc failed
ahc_isa_probe 13: ioport 0xdc00 alloc failed
ahc_isa_probe 14: ioport 0xec00 alloc failed
ex_isa_identify()
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem
0xc0000-0xc8fff,0xc9000-0xc9fff,0xec000-0xeffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0xffffffff (1)
atkbd: failed to reset the keyboard.
kbd0 at atkbd0
kbd0: atkbd0, AT 84 (1), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 57
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0065
psm0: failed to reset the aux device.
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isa_probe_children: probing PnP devices
ums0: Dell Dell USB Mouse, rev 2.00/1.10, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
ukbd0: vendor 0x1267 product 0x0103, rev 1.10/1.01, addr 3, iclass 3/1
kbd2 at ukbd0
kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000
uhid0: vendor 0x1267 product 0x0103, rev 1.10/1.01, addr 3, iclass 3/1
Device configuration finished.
Reducing kern.maxvnodes 132572 -> 100000
procfs registered
linprocfs registered
lapic: Divisor 2, Frequency 100004069 hz
Timecounter "TSC" frequency 1800073149 Hz quality 800
Timecounters tick every 1.000 msec
Linux ELF exec handler installed
lo0: bpf attached
hptrr: no controller detected.
rr232x: no controller detected.
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on HT1000 chip
acd0: setting UDMA33 on HT1000 chip
acd0: <HL-DT-STDVD-ROM GDR-T10N/1.02> DVDROM drive at ata0 as master
acd0: read 4134KB/s (4134KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad4: setting PIO4 on HT1000 chip
ad4: DMA limited to UDMA33, device found non-ATA66 cable
ad4: setting UDMA33 on HT1000 chip
ad4: 76293MB <WDC WD800JD-75MSA3 10.01E04> at ata2-master UDMA33
ad4: 156250000 sectors [155009C/16H/63S] 16 sectors/interrupt 1 depth queue
ad4: Adaptec check1 failed
ad4: LSI (v3) check1 failed
ad4: LSI (v2) check1 failed
ad4: FreeBSD check1 failedGEOM: new disk ad4
ATA PseudoRAID loaded
Trying to mount root from ufs:/dev/ad4s1a
start_init: trying /sbin/init
--
Mel
More information about the freebsd-bugs
mailing list