kern/123039: ACPI AML_BUFFER_LIMIT errors during boot
moose at opera.com
moose at opera.com
Thu Apr 24 02:30:01 UTC 2008
>Number: 123039
>Category: kern
>Synopsis: ACPI AML_BUFFER_LIMIT errors during boot
>Confidential: no
>Severity: non-critical
>Priority: medium
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Thu Apr 24 02:30:01 UTC 2008
>Closed-Date:
>Last-Modified:
>Originator: moose at opera.com
>Release: FreeBSD 8.0-CURRENT
>Organization:
Opera Software
>Environment:
FreeBSD evangelista.lan 8.0-CURRENT FreeBSD 8.0-CURRENT #0: Thu Apr 24 00:50:02 CEST 2008 moose at evangelista.lan:/usr/obj/usr/src/sys/EVANGELISTA amd64
>Description:
I am seeing the following boot errors from ACPI on a new PhenomX4 machine:
ACPI Error (dsopcode-0671): Field [ASSM] at 524320 exceeds Buffer [BUF0] size 880 (bits) [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.MEM_._CRS] (Node 0xffffff00011cd620), AE_AML_BUFFER_LIMIT
ACPI Error (uteval-0309): Method execution failed [\\_SB_.MEM_._CRS] (Node 0xffffff00011cd620), AE_AML_BUFFER_LIMIT
can't fetch resources for \\_SB_.MEM_ - AE_AML_BUFFER_LIMIT
=====================
Errors occur with GENERIC as well. Full dmesg:
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-CURRENT #0: Thu Apr 24 00:50:02 CEST 2008
moose at evangelista.lan:/usr/obj/usr/src/sys/EVANGELISTA
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Phenom(tm) 9500 Quad-Core Processor (2210.07-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x100f22 Stepping = 2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x802009<SSE3,MON,CX16,POPCNT>
AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x7ff<LAHF,CMP,SVM,ExtAPIC,CR8,<b5>,<b6>,<b7>,Prefetch,<b9>,<b10>>
Cores per package: 4
usable memory = 4285005824 (4086 MB)
avail memory = 4141187072 (3949 MB)
ACPI APIC Table: <HPQOEM SLIC-CPC>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
ioapic0: Changing APIC ID to 4
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <HPQOEM SLIC-CPC> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
ACPI Error (dsopcode-0671): Field [ASSM] at 524320 exceeds Buffer [BUF0] size 880 (bits) [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.MEM_._CRS] (Node 0xffffff00011cd620), AE_AML_BUFFER_LIMIT
ACPI Error (uteval-0309): Method execution failed [\\_SB_.MEM_._CRS] (Node 0xffffff00011cd620), AE_AML_BUFFER_LIMIT
can't fetch resources for \\_SB_.MEM_ - AE_AML_BUFFER_LIMIT
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
pci0: <memory, RAM> at device 1.2 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfe02f000-0xfe02ffff irq 23 at device 2.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 10 ports with 10 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe02e000-0xfe02e0ff irq 22 at device 2.1 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb1: EHCI version 1.0
usb1: companion controller, 10 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1
uhub1: 10 ports with 10 removable, self powered
uhub2: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/7.02, addr 2> on uhub1
uhub2: single transaction translator
uhub2: 4 ports with 2 removable, self powered
ukbd0: <Formosa21 Beanbag Emulation Device, class 0/0, rev 2.00/0.70, addr 3> on uhub2
kbd2 at ukbd0
umass0: <Generic USB2.0-CRW, class 0/0, rev 2.00/51.95, addr 4> on uhub2
pcib1: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci1: <ACPI PCI bus> on pcib1
fwohci0: <Lucent FW322/323> mem 0xfdeff000-0xfdefffff irq 19 at device 5.0 on pci1
fwohci0: [FILTER]
fwohci0: OHCI version 1.0 (ROM=0)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 00:1e:8c:00:00:20:cf:d1
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 1024 bytes.
fwohci0: max_rec 1024 -> 2048
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:1e:8c:20:cf:d1
fwe0: Ethernet address: 02:1e:8c:20:cf:d1
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:1e:8c:00:00:20:cf:d1 @ 0xfffe00000000, S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x1168000
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
pcm0: <NVidia MCP61 High Definition Audio Controller> mem 0xfe024000-0xfe027fff irq 23 at device 5.0 on pci0
pcm0: [ITHREAD]
atapci0: <nVidia nForce MCP61 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 6.0 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
nfe0: <NVIDIA nForce MCP61 Networking Adapter> port 0xec00-0xec07 mem 0xfe02d000-0xfe02dfff irq 22 at device 7.0 on pci0
miibus0: <MII bus> on nfe0
rlphy0: <RTL8201L 10/100 media interface> PHY 1 on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
nfe0: Ethernet address: 00:1e:8c:98:3b:84
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
atapci1: <nVidia nForce MCP61 SATA300 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xd800-0xd80f mem 0xfe02c000-0xfe02cfff irq 20 at device 8.0 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
atapci2: <nVidia nForce MCP61 SATA300 controller> port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xc400-0xc40f mem 0xfe02b000-0xfe02bfff irq 21 at device 8.1 on pci0
atapci2: [ITHREAD]
ata4: <ATA channel 0> on atapci2
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci2
ata5: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci2: <ACPI PCI bus> on pcib2
vgapci0: <VGA-compatible display> port 0xac00-0xac7f mem 0xfa000000-0xfaffffff,0xe0000000-0xefffffff,0xf8000000-0xf9ffffff irq 16 at device 0.0 on pci2
pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pci4: <network> at device 0.0 (no driver attached)
acpi_hpet0: <High Precision Event Timer> iomem 0xfefff000-0xfefff3ff on acpi0
Timecounter "HPET" frequency 25000000 Hz quality 900
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: <Logitech USB RECEIVER, class 0/0, rev 1.10/25.10, addr 2> on uhub0
ums0: 16 buttons and Z dir.
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
ad4: 476940MB <Seagate ST3500630AS 3.CHN> at ata2-master SATA300
ad6: 476940MB <Seagate ST3500630AS 3.CHN> at ata3-master SATA300
acd0: DVDR <HL-DT-ST BDDVDRW GGC-H20L/1.05> at ata4-master SATA150
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x01
acd1: DVDROM <ASUS DVD-E616A3T/CP09> at ata5-master SATA150
pcm0: <HDA Codec: Realtek ALC888>
pcm0: <HDA Driver Revision: 20080420_0052>
acd1: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
cd1 at ata5 bus 0 target 0 lun 0
cd1: <ASUS DVD-E616A3T CP09> Removable CD-ROM SCSI-0 device
cd1: 3.300MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present - tray closed
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Generic- Compact Flash 1.00> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
cd0 at ata4 bus 0 target 0 lun 0
cd0: <HL-DT-ST BDDVDRW GGC-H20L 1.05> Removable CD-ROM SCSI-0 device
cd0: 3.300MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
da1 at umass-sim0 bus 0 target 0 lun 1
da1: <Generic- SM/xD-Picture 1.00> Removable Direct Access SCSI-0 device
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
da2 at umass-sim0 bus 0 target 0 lun 2
da2: <Generic- SD/MMC 1.00> Removable Direct Access SCSI-0 device
da2: 40.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
da3 at umass-sim0 bus 0 target 0 lun 3
da3: <Generic- MS/MS-Pro 1.00> Removable Direct Access SCSI-0 device
da3: 40.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad4s1a
>How-To-Repeat:
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
More information about the freebsd-bugs
mailing list