kern/111699: [sata] SATA drives on an Asus A8V-MX are no longer
detected on 7.0-CURRENT (regression)
Dave Grochowski
malus.x at gmail.com
Mon Sep 10 17:51:52 PDT 2007
Hey,
Andrey V. Elsukov wrote:
> Dave Grochowski wrote:
>> The attached patch fixes the problem for me. The value for VIAAHCI
>> should probably be 0x0C00 instead of 0x0800, but I do not know if
>> this will have any ramifications for future AHCI capable VIA chipsets.
>
> Hm.. VIAAHCI & VIABAR == 0.
> This changes disable AHCI.
>
>> --- /usr/src/sys/dev/ata/ata-chipset.c.orig 2007-09-09
>> 21:01:35.000000000 -0400
>> +++ /usr/src/sys/dev/ata/ata-chipset.c 2007-09-09
>> 21:02:12.000000000 -0400
>> @@ -5098,7 +5098,7 @@
>> { ATA_VIA6420, 0x00, 7, 0x00, ATA_SA150, "6420" },
>> { ATA_VIA6421, 0x00, 6, VIABAR, ATA_SA150, "6421" },
>> { ATA_VIA8237A, 0x00, 7, 0x00, ATA_SA150, "8237A" },
>> - { ATA_VIA8251, 0x00, 0, VIAAHCI, ATA_SA300, "8251" },
>> + { ATA_VIA8251, 0x00, 0, VIAAHCI & VIABAR, ATA_SA300,
>> "8251" },
>> { 0, 0, 0, 0, 0, 0 }};
>> char buffer[64];
>
> Can you show verbose dmesg from RELENG_6 (without this patch)?
>
I've attached a verbose dmesg from a Freesbie CD.
Sincerely,
Dave Grochowski
-------------- next part --------------
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE #11: Wed Feb 7 16:52:42 UTC 2007
root at kaiser.sig11.org:/usr/obj.gmv-i386/usr/src/sys/FREESBIE
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0bfa000.
Preloaded elf module "/boot/kernel/splash_bmp.ko" at 0xc0bfa190.
Preloaded splash_image_data "/boot/freesbie20.bmp" at 0xc0bfa240.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0bfa294.
MP Configuration Table version 1.4 found at 0xc00f1030
Table 'FACP' at 0x1f7b0290
Table 'APIC' at 0x1f7b0390
MADT: Found table at 0x1f7b0390
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
MADT: Found CPU APIC ID 129 ACPI ID 2: disabled
ACPI APIC Table: <A M I OEMAPIC >
Calibrating clock(s) ... i8254 clock: 1193175 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2200100837 Hz
CPU: AMD Opteron(tm) Processor 148 (2200.10-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x20f71 Stepping = 1
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
Features2=0x1<SSE3>
AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow+,3DNow>
AMD Features2=0x1<LAHF>
Data TLB: 32 entries, fully associative
Instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory = 528154624 (503 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c25000 - 0x000000001ee90fff, 505856000 bytes (123500 pages)
avail memory = 507404288 (483 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f0000
bios32: Entry = 0xf0010 (c00f0010) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x31
pnpbios: Found PnP BIOS data at 0xc00f7ee0
pnpbios: Entry = f0000:8d7a Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 1
MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: low
ioapic0 <Version 0.3> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00040010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00000000 err: 0x0001000f pcm: 0x00010000
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
wlan: <802.11 Link Layer>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
io: <I/O>
VESA: information block
56 45 53 41 00 03 1b 38 00 c0 01 00 00 00 1c 37
00 c0 80 00 00 01 18 38 00 c0 19 38 00 c0 1a 38
00 c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
VESA: 23 mode(s) found
VESA: v3.0, 8192k memory, flags:0x1, mode table:0xc00c371c (c000371c)
VESA: VIA K8M800
VESA:
splash: image at 0xc0ade204, size:787506
splash_bmp: beyond screen capacity (1024x768, 255 colors)
splash_bmp: beyond screen capacity (1024x768, 255 colors)
bmp_start(): splash_mode:261
splash: image decoder found: splash_bmp
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
rr232x: RocketRAID 232x controller driver v1.02 (Feb 7 2007 16:52:28)
npx0: INT 16 interface
acpi0: <A M I OEMXSDT> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80008f64
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=02041106)
pcibios: BIOS version 3.00
Found $PIR table, 11 entries at 0xc00f7da0
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 1 A 0x01 3 4 5 6 7 10 11 12 14 15
embedded 0 1 B 0x02 3 4 5 6 7 10 11 12 14 15
embedded 1 0 A 0x01 3 4 5 6 7 10 11 12 14 15
embedded 0 17 C 0x03 3 4 5 6 7 10 11 12 14 15
embedded 0 15 A 0x02 3 4 5 6 7 10 11 12 14 15
embedded 0 15 B 0x02 3 4 5 6 7 10 11 12 14 15
embedded 0 15 C 0x02 3 4 5 6 7 10 11 12 14 15
embedded 0 15 D 0x02 3 4 5 6 7 10 11 12 14 15
slot 16 3 0 A 0x01 3 4 5 6 7 10 11 12 14 15
slot 16 3 0 B 0x02 3 4 5 6 7 10 11 12 14 15
slot 16 3 0 C 0x03 3 4 5 6 7 10 11 12 14 15
slot 16 3 0 D 0x05 3 4 5 6 7 10 11 12 14 15
embedded 2 0 A 0x05 3 4 5 6 7 10 11 12 14 15
embedded 2 0 B 0x05 3 4 5 6 7 10 11 12 14 15
embedded 2 0 C 0x05 3 4 5 6 7 10 11 12 14 15
embedded 2 0 D 0x05 3 4 5 6 7 10 11 12 14 15
slot 16 4 0 A 0x01 3 4 5 6 7 10 11 12 14 15
slot 16 4 0 B 0x02 3 4 5 6 7 10 11 12 14 15
slot 16 4 0 C 0x03 3 4 5 6 7 10 11 12 14 15
slot 16 4 0 D 0x05 3 4 5 6 7 10 11 12 14 15
slot 1 5 11 A 0x01 3 4 5 6 7 10 11 12 14 15
slot 1 5 11 B 0x02 3 4 5 6 7 10 11 12 14 15
slot 1 5 11 C 0x03 3 4 5 6 7 10 11 12 14 15
slot 1 5 11 D 0x05 3 4 5 6 7 10 11 12 14 15
slot 2 5 12 A 0x02 3 4 5 6 7 10 11 12 14 15
slot 2 5 12 B 0x03 3 4 5 6 7 10 11 12 14 15
slot 2 5 12 C 0x05 3 4 5 6 7 10 11 12 14 15
slot 2 5 12 D 0x01 3 4 5 6 7 10 11 12 14 15
embedded 0 16 A 0x01 3 4 5 6 7 10 11 12 14 15
embedded 0 16 B 0x02 3 4 5 6 7 10 11 12 14 15
embedded 0 16 C 0x03 3 4 5 6 7 10 11 12 14 15
embedded 0 16 D 0x05 3 4 5 6 7 10 11 12 14 15
embedded 0 18 A 0x01 3 4 5 6 7 10 11 12 14 15
embedded 0 18 B 0x02 3 4 5 6 7 10 11 12 14 15
embedded 0 18 C 0x03 3 4 5 6 7 10 11 12 14 15
embedded 0 18 D 0x05 3 4 5 6 7 10 11 12 14 15
AcpiOsDerivePciId: bus 0 dev 15 func 1
AcpiOsDerivePciId: bus 0 dev 17 func 0
AcpiOsDerivePciId: bus 0 dev 17 func 0
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xcd3fb000 pa 0x9e000
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 10 11 12 14 15
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 10 11 12 14 15
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 6 7 10 11 12 14 15
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 6 7 10 11 12 14 15
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 5 6 7 10 11 12 14 15
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 5 6 7 10 11 12 14 15
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 3 N 0 3 4 5 6 7 10 11 12 14 15
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 3 N 0 3 4 5 6 7 10 11 12 14 15
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link4: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link4: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link4: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link5: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link5: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link5: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link6: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link6: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link6: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link7: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link7: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link7: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0x5010
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x1106, dev=0x0204, revid=0x00
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0106, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[10]: type 3, range 32, base fa000000, size 25, enabled
found-> vendor=0x1106, dev=0x1204, revid=0x00
bus=0, slot=0, func=1
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x2204, revid=0x00
bus=0, slot=0, func=2
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x3204, revid=0x00
bus=0, slot=0, func=3
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x4204, revid=0x00
bus=0, slot=0, func=4
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x7204, revid=0x00
bus=0, slot=0, func=7
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0xb188, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0b (2750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x3349, revid=0x00
bus=0, slot=15, func=0
class=01-06-01, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
map[10]: type 4, range 32, base 0000ec00, size 3, enabled
map[14]: type 4, range 32, base 0000e880, size 2, enabled
map[18]: type 4, range 32, base 0000e800, size 3, enabled
map[1c]: type 4, range 32, base 0000e480, size 2, enabled
map[20]: type 4, range 32, base 0000e400, size 4, enabled
map[24]: type 1, range 32, base febffc00, size 10, enabled
pcib0: matched entry for 0.15.INTB
pcib0: slot 15 INTB hardwired to IRQ 21
found-> vendor=0x1106, dev=0x0571, revid=0x07
bus=0, slot=15, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000fc00, size 4, enabled
found-> vendor=0x1106, dev=0x3038, revid=0x90
bus=0, slot=16, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 0000e080, size 5, enabled
pcib0: matched entry for 0.16.INTA
pcib0: slot 16 INTA hardwired to IRQ 20
found-> vendor=0x1106, dev=0x3038, revid=0x90
bus=0, slot=16, func=1
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 0000e000, size 5, enabled
pcib0: matched entry for 0.16.INTC
pcib0: slot 16 INTC hardwired to IRQ 22
found-> vendor=0x1106, dev=0x3038, revid=0x90
bus=0, slot=16, func=2
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 0000dc00, size 5, enabled
pcib0: matched entry for 0.16.INTB
pcib0: slot 16 INTB hardwired to IRQ 21
found-> vendor=0x1106, dev=0x3038, revid=0x90
bus=0, slot=16, func=3
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=3
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 0000d880, size 5, enabled
pcib0: matched entry for 0.16.INTD
pcib0: slot 16 INTD hardwired to IRQ 23
found-> vendor=0x1106, dev=0x3104, revid=0x90
bus=0, slot=16, func=4
class=0c-03-20, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base febff800, size 8, enabled
pcib0: matched entry for 0.16.INTC
pcib0: slot 16 INTC hardwired to IRQ 22
found-> vendor=0x1106, dev=0x3287, revid=0x00
bus=0, slot=17, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0003, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0x287e, revid=0x00
bus=0, slot=17, func=7
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x287b, revid=0x00
bus=0, slot=19, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0107, statreg=0x2000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x287a, revid=0x00
bus=0, slot=19, func=1
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x2000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1100, revid=0x00
bus=0, slot=24, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1101, revid=0x00
bus=0, slot=24, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1102, revid=0x00
bus=0, slot=24, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1103, revid=0x00
bus=0, slot=24, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
agp0: <VIA 8380 host to PCI bridge> mem 0xfa000000-0xfbffffff at device 0.0 on pci0
agp0: 1 Miscellaneous Control unit(s) found.
agp0: Aperture Base[0]: 0x0000007d
agp0: Reserved 0x2000000 bytes for rid 0x10 type 3 at 0xfa000000
agp0: allocating GATT for aperture of size 32M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xfc800000-0xfe8fffff
pcib1: prefetched decode 0xf0700000-0xf86fffff
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x1106, dev=0x3108, revid=0x01
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 3, range 32, base f4000000, size 26, enabled
pcib1: (null) requested memory range 0xf4000000-0xf7ffffff: good
map[14]: type 1, range 32, base fd000000, size 24, enabled
pcib1: (null) requested memory range 0xfd000000-0xfdffffff: good
pcib1: matched entry for 1.0.INTA
pcib1: slot 0 INTA hardwired to IRQ 16
pci1: <display, VGA> at device 0.0 (no driver attached)
atapci0: <VIA 8251 SATA300 controller> port 0xec00-0xec07,0xe880-0xe883,0xe800-0xe807,0xe480-0xe483,0xe400-0xe40f mem 0xfebffc00-0xfebfffff irq 21 at device 15.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xe400
ioapic0: routing intpin 21 (PCI IRQ 21) to vector 49
atapci0: [MPSAFE]
atapci0: Reserved 0x400 bytes for rid 0x24 type 3 at 0xfebffc00
atapci0: AHCI Version 01.00 controller with 4 ports detected
ata2: <ATA channel 0> on atapci0
ata2: SATA connect ready time=0ms
ata2: sata_connect devices=0x1<ATA_MASTER>
ata2: [MPSAFE]
ata3: <ATA channel 1> on atapci0
ata3: SATA connect ready time=0ms
ata3: sata_connect devices=0x1<ATA_MASTER>
ata3: [MPSAFE]
ata4: <ATA channel 2> on atapci0
ata4: SATA connect status=00000000
ata4: [MPSAFE]
ata5: <ATA channel 3> on atapci0
ata5: SATA connect status=00000000
ata5: [MPSAFE]
atapci1: <VIA 8251 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 15.1 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfc00
ata0: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x90 err=0x90 lsb=0x90 msb=0x90
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 50
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci1: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 51
ata1: [MPSAFE]
uhci0: <VIA 83C572 USB controller> port 0xe080-0xe09f irq 20 at device 16.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe080
ioapic0: routing intpin 20 (PCI IRQ 20) to vector 52
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xe000-0xe01f irq 22 at device 16.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe000
ioapic0: routing intpin 22 (PCI IRQ 22) to vector 53
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xdc00-0xdc1f irq 21 at device 16.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xdc00
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0xd880-0xd89f irq 23 at device 16.3 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd880
ioapic0: routing intpin 23 (PCI IRQ 23) to vector 54
uhci3: [GIANT-LOCKED]
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xfebff800-0xfebff8ff irq 22 at device 16.4 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfebff800
ehci0: [GIANT-LOCKED]
ehci0: Dropped interrupts workaround enabled
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <VIA VT6202 USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
pcib2: <ACPI PCI-PCI bridge> at device 19.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 4
pcib2: I/O decode 0xb000-0xbfff
pcib2: memory decode 0xfe900000-0xfe9fffff
pcib2: prefetched decode 0xfff00000-0xfffff
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
found-> vendor=0x1106, dev=0x287c, revid=0x00
bus=2, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x287d, revid=0x00
bus=2, slot=0, func=1
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0104, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci2
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0xb000-0xbfff
pcib3: memory decode 0xfe900000-0xfe9fffff
pcib3: prefetched decode 0xfff00000-0xfffff
pci3: <ACPI PCI bus> on pcib3
pci3: physical bus=3
found-> vendor=0x8086, dev=0x10b9, revid=0x06
bus=3, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 1, range 32, base fe9e0000, size 17, enabled
pcib3: (null) requested memory range 0xfe9e0000-0xfe9fffff: good
pcib2: (null) requested memory range 0xfe9e0000-0xfe9fffff: good
map[14]: type 1, range 32, base fe9c0000, size 17, enabled
pcib3: (null) requested memory range 0xfe9c0000-0xfe9dffff: good
pcib2: (null) requested memory range 0xfe9c0000-0xfe9dffff: good
map[18]: type 4, range 32, base 0000bc00, size 5, enabled
pcib3: (null) requested I/O range 0xbc00-0xbc1f: in range
pcib2: (null) requested I/O range 0xbc00-0xbc1f: in range
pcib3: matched entry for 3.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 16
em0: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port 0xbc00-0xbc1f mem 0xfe9e0000-0xfe9fffff,0xfe9c0000-0xfe9dffff irq 16 at device 0.0 on pci3
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfe9e0000
em0: Reserved 0x20 bytes for rid 0x18 type 4 at 0xbc00
em0: bpf attached
em0: Ethernet address: 00:15:17:1e:54:b7
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 55
em0: [MPSAFE]
pcib4: <ACPI PCI-PCI bridge> at device 0.1 on pci2
pcib4: secondary bus 4
pcib4: subordinate bus 4
pcib4: I/O decode 0x0-0x0
pcib4: memory decode 0x0-0x0
pcib4: prefetched decode 0x0-0x0
pci4: <ACPI PCI bus> on pcib4
pci4: physical bus=4
pcib5: <ACPI PCI-PCI bridge> at device 19.1 on pci0
pcib5: secondary bus 5
pcib5: subordinate bus 5
pcib5: I/O decode 0xc000-0xcfff
pcib5: memory decode 0xfea00000-0xfeafffff
pcib5: prefetched decode 0xfff00000-0xfffff
pci5: <ACPI PCI bus> on pcib5
pci5: physical bus=5
found-> vendor=0x8086, dev=0x107c, revid=0x05
bus=5, slot=11, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0230, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base feae0000, size 17, enabled
pcib5: (null) requested memory range 0xfeae0000-0xfeafffff: good
map[14]: type 1, range 32, base feac0000, size 17, enabled
pcib5: (null) requested memory range 0xfeac0000-0xfeadffff: good
map[18]: type 4, range 32, base 0000cc00, size 6, enabled
pcib5: (null) requested I/O range 0xcc00-0xcc3f: in range
pcib5: matched entry for 5.11.INTA
pcib5: slot 11 INTA hardwired to IRQ 16
found-> vendor=0x168c, dev=0x0013, revid=0x01
bus=5, slot=12, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0116, statreg=0x0290, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x0a (2500 ns), maxlat=0x1c (7000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base fea90000, size 16, enabled
pcib5: (null) requested memory range 0xfea90000-0xfea9ffff: good
pcib5: matched entry for 5.12.INTA
pcib5: slot 12 INTA hardwired to IRQ 17
em1: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port 0xcc00-0xcc3f mem 0xfeae0000-0xfeafffff,0xfeac0000-0xfeadffff irq 16 at device 11.0 on pci5
em1: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfeae0000
em1: Reserved 0x40 bytes for rid 0x18 type 4 at 0xcc00
em1: bpf attached
em1: Ethernet address: 00:0e:0c:d9:ca:1b
em1: [MPSAFE]
ath0: <Atheros 5212> mem 0xfea90000-0xfea9ffff irq 17 at device 12.0 on pci5
ath0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xfea90000
ioapic0: routing intpin 17 (PCI IRQ 17) to vector 56
ath0: [MPSAFE]
ath0: bpf attached
ath0: Ethernet address: 00:12:17:61:01:3b
ath0: bpf attached
ath0: bpf attached
ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: turboA rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: mac 5.6 phy 4.1 radio 3.6
ath0: Use hw queue 1 for WME_AC_BE traffic
ath0: Use hw queue 0 for WME_AC_BK traffic
ath0: Use hw queue 2 for WME_AC_VI traffic
ath0: Use hw queue 3 for WME_AC_VO traffic
ath0: Use hw queue 8 for CAB traffic
ath0: Use hw queue 9 for beacons
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
ioapic0: routing intpin 6 (ISA IRQ 6) to vector 57
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ioapic0: routing intpin 7 (ISA IRQ 7) to vector 58
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 59
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
ex_isa_identify()
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ahc_isa_probe 11: ioport 0xbc00 alloc failed
ahc_isa_probe 12: ioport 0xcc00 alloc failed
ahc_isa_probe 13: ioport 0xdc00 alloc failed
ahc_isa_probe 14: ioport 0xec00 alloc failed
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc8800-0xc97ff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
kbd0: atkbd0, generic (0), config:0x0, flags:0x3f0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 60
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0045
psm0: failed to reset the aux device.
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0 0 0 0
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
ugen0: American Power Conversion Back-UPS XS 1500 LCD FW:837.H4 .D USB FW:H4, rev 1.10/1.01, addr 2
ulpt0: Lexmark International, Inc. Laser Printer E210, rev 1.10/1.00, addr 3, iclass 7/1
ulpt0: using bi-directional mode
ukbd0: Logitech Logitech USB Keyboard, rev 1.10/28.00, addr 2, iclass 3/1
kbd2 at ukbd0
kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 100003938 hz
Timecounter "TSC" frequency 2200100837 Hz quality 800
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to accept, logging unlimited
pflog0: bpf attached
lo0: bpf attached
pfsync0: bpf attached
rr232x: no controller detected.
em0: Link is up 1000 Mbps Full Duplex
em1: Link is up 100 Mbps Full Duplex
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
ad0: setting PIO4 on 8251 chip
ad0: setting UDMA100 on 8251 chip
ad0: 114473MB <Seagate ST3120026A 3.06> at ata0-master UDMA100
ad0: 234441648 sectors [232581C/16H/63S] 16 sectors/interrupt 1 depth queue
ad0: VIA check1 failed
ad0: Adaptec check1 failed
ad0: LSI (v3) check1 failed
ad0: LSI (v2) check1 failed
ad0: FreeBSD check1 failed
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on 8251 chip
acd0: setting UDMA33 on 8251 chip
acd0: <LITE-ON COMBO LTC-48161H/KGH1> CDRW drive at ata1 as master
acd0: read 1377KB/s (8268KB/s) write 8268KB/s (8268KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes: CDR, CDRW, test write, burnproof
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-R 120mm data disc
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad4: 305245MB <Seagate ST3320620AS 3.AAC> at ata2-master SATA150
ad4: 625142448 sectors [620181C/16H/63S] 16 sectors/interrupt 1 depth queue
ad4: VIA check1 failed
ad4: Adaptec check1 failed
ad4: LSI (v3) check1 failed
ad4: LSI (v2) check1 failed
ad4: FreeBSD check1 failed
ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad6: 305245MB <Seagate ST3320620AS 3.AAC> at ata3-master SATA150
ad6: 625142448 sectors [620181C/16H/63S] 16 sectors/interrupt 1 depth queue
ad6: VIA check1 failed
ad6: Adaptec check1 failed
ad6: LSI (v3) check1 failed
ad6: LSI (v2) check1 failed
ad6: FreeBSD check1 failed
ATA PseudoRAID loaded
GEOM: new disk ad0
GEOM: new disk ad4
GEOM: new disk ad6
acd0: FAILURE - READ_BIG MEDIUM ERROR asc=0x11 ascq=0x05
(probe0:ata1:0:0:0): error 22
(probe0:ata1:0:0:0): Unretryable Error
pass0 at ata1 bus 0 target 0 lun 0
pass0: <LITE-ON COMBO LTC-48161H KGH1> Removable CD-ROM SCSI-0 device
pass0: 33.000MB/s transfers
cd0 at ata1 bus 0 target 0 lun 0
cd0: <LITE-ON COMBO LTC-48161H KGH1> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: cd present [343722 x 2048 byte records]
GEOM_LABEL: Label for provider acd0 is iso9660/FreeSBIE.
acd0: FAILURE - READ_BIG MEDIUM ERROR asc=0x11 ascq=0x05
GEOM: new disk cd0
(cd0:ata1:0:0:0): READ(10). CDB: 28 0 0 5 3e a9 0 0 1 0
(cd0:ata1:0:0:0): CAM Status: SCSI Status Error
(cd0:ata1:0:0:0): SCSI Status: Check Condition
(cd0:ata1:0:0:0): MEDIUM ERROR info?:53ea9 asc:11,5
(cd0:ata1:0:0:0): L-EC uncorrectable error
(cd0:ata1:0:0:0): (cd0:ata1:0:0:0): READ(10). CDB: 28 0 0 5 3e a9 0 0 1 0
(cd0:ata1:0:0:0): MEDIUM ERROR info?:53ea9 asc:11,5
(cd0:ata1:0:0:0): L-EC uncorrectable error
Retrying Command (per Sense Data)
(cd0:ata1:0:0:0): Retrying Command
(cd0:ata1:0:0:0): READ(10). CDB: 28 0 0 5 3e a9 0 0 1 0
(cd0:ata1:0:0:0): CAM Status: SCSI Status Error
(cd0:ata1:0:0:0): SCSI Status: Check Condition
(cd0:ata1:0:0:0): MEDIUM ERROR info?:53ea9 asc:11,5
(cd0:ata1:0:0:0): L-EC uncorrectable error
(cd0:ata1:0:0:0): (cd0:ata1:0:0:0): READ(10). CDB: 28 0 0 5 3e a9 0 0 1 0
(cd0:ata1:0:0:0): MEDIUM ERROR info?:53ea9 asc:11,5
(cd0:ata1:0:0:0): L-EC uncorrectable error
Retrying Command (per Sense Data)
(cd0:ata1:0:0:0): Retrying Command
(cd0:ata1:0:0:0): READ(10). CDB: 28 0 0 5 3e a9 0 0 1 0
(cd0:ata1:0:0:0): CAM Status: SCSI Status Error
(cd0:ata1:0:0:0): SCSI Status: Check Condition
(cd0:ata1:0:0:0): MEDIUM ERROR info?:53ea9 asc:11,5
(cd0:ata1:0:0:0): L-EC uncorrectable error
(cd0:ata1:0:0:0): (cd0:ata1:0:0:0): READ(10). CDB: 28 0 0 5 3e a9 0 0 1 0
(cd0:ata1:0:0:0): MEDIUM ERROR info?:53ea9 asc:11,5
(cd0:ata1:0:0:0): L-EC uncorrectable error
Retrying Command (per Sense Data)
(cd0:ata1:0:0:0): Retrying Command
(cd0:ata1:0:0:0): READ(10). CDB: 28 0 0 5 3e a9 0 0 1 0
(cd0:ata1:0:0:0): CAM Status: SCSI Status Error
(cd0:ata1:0:0:0): SCSI Status: Check Condition
(cd0:ata1:0:0:0): MEDIUM ERROR info?:53ea9 asc:11,5
(cd0:ata1:0:0:0): L-EC uncorrectable error
(cd0:ata1:0:0:0): (cd0:ata1:0:0:0): READ(10). CDB: 28 0 0 5 3e a9 0 0 1 0
(cd0:ata1:0:0:0): MEDIUM ERROR info?:53ea9 asc:11,5
(cd0:ata1:0:0:0): L-EC uncorrectable error
Retrying Command (per Sense Data)
(cd0:ata1:0:0:0): Retrying Command
(cd0:ata1:0:0:0): READ(10). CDB: 28 0 0 5 3e a9 0 0 1 0
(cd0:ata1:0:0:0): CAM Status: SCSI Status Error
(cd0:ata1:0:0:0): SCSI Status: Check Condition
(cd0:ata1:0:0:0): MEDIUM ERROR info?:53ea9 asc:11,5
(cd0:ata1:0:0:0): L-EC uncorrectable error
(cd0:ata1:0:0:0): (cd0:ata1:0:0:0): READ(10). CDB: 28 0 0 5 3e a9 0 0 1 0
(cd0:ata1:0:0:0): MEDIUM ERROR info?:53ea9 asc:11,5
(cd0:ata1:0:0:0): L-EC uncorrectable error
Retries Exhausted
(cd0:ata1:0:0:0): error 5
(cd0:ata1:0:0:0): Unretryable Error
(cd0:ata1:0:0:0): cddone: got error 0x5 back
Trying to mount root from cd9660:/dev/iso9660/FreeSBIE
start_init: trying /sbin/init
md0.uzip: 31832 x 65536 blocks
em0: Link is Down
em0: Link is up 1000 Mbps Full Duplex
em1: Link is Down
em1: Link is up 100 Mbps Full Duplex
More information about the freebsd-bugs
mailing list