kern/118238: bce driver shows "no carrier" on Intel SBXD132 blade (based on IBM HS21)

[Oleg]

>Number:         118238
>Category:       kern
>Synopsis:       bce driver shows "no carrier" on Intel SBXD132 blade (based on IBM HS21)
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    freebsd-bugs
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Sat Nov 24 20:20:02 UTC 2007
>Closed-Date:
>Last-Modified:
>Originator:     Oleg
>Release:        6.3-prerelease
>Organization:
>Environment:
6.3-prerelease, kernel with miibus without any NICs driver
loaded module if_bce.ko 
>Description:
ifconfig bce0 report:

bce0: flags=8847<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=3b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU>
        inet 172.0.0.199 netmask 0xffffff00 broadcast 172.0.0.255
        ether 00:1a:64:33:29:c7
        media: Ethernet autoselect (none)
        status: no carrier


Try to set
#ifconfig bce0 media 1000baseSX mediaopt full-duplex

bce0: flags=8847<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=3b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU>
        inet 172.0.0.199 netmask 0xffffff00 broadcast 172.0.0.255
        ether 00:1a:64:33:29:c7
        media: Ethernet 1000baseSX <full-duplex> (none)
        status: no carrier

---

#pciconf -lv

bce1 at pci6:0:0: class=0x020000 .... rev=0x12
NetXtreme II BCM5708S Gigabit Ethernet

...
BCM5715 Broadcom dual gigabit, pci bridge

#dmesg|grep bce

bce0: <Broadcom NetXtreme II BCM5708 1000Base-SX (B2)>
...
bce0: ASIC (0x057081021); Rev (B2); ..


 
>How-To-Repeat:
Install freebsd 6.3-prerelease on Intel SBXD132 (or IBM HS21 may be too) blade with Broadcom NetXtreme II BMC5708S B2
>Fix:


>Release-Note:
>Audit-Trail:
>Unformatted: