misc/118021: 7.0 Beta 2 sysinstall keyboard emits control character with all keypresses

[Cha Albert]

>Number:         118021
>Category:       misc
>Synopsis:       7.0 Beta 2 sysinstall keyboard emits control character with all keypresses
>Confidential:   no
>Severity:       non-critical
>Priority:       low
>Responsible:    freebsd-bugs
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Tue Nov 13 19:10:00 UTC 2007
>Closed-Date:
>Last-Modified:
>Originator:     Cha Albert
>Release:        7.0 Beta 2
>Organization:
HEALTHCAREfirst, Inc
>Environment:
Unable to get system installed
>Description:
I have downloaded the 7.0 beta 2 ISO file for i386.  I am trying to
install it on an ASUS G1S laptop.  6.2 works very nicely. When I insert the Install CD and start going through the steps, it seems as if every key I press
sends a ctrl key with it.  When I choose to create a partition it just
pops up and asks if I would like to abort or restart the install as if I have pressed "ctrl+c".  Other keys produce the same behavior.  When I switch to a terminal pressing d will exit etc...  I have tried this with and without an external keyboard on the laptop.  I have also tried two different external keyboards.  Below is my dmesg.boot from 6.2 in case you need it.




Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-STABLE #5: Fri Sep 14 11:54:12 CDT 2007
    calbert at schmaptop.sgf.healthcarefirst.med:/usr/obj/usr/src/sys/SCHMAPTOP
WARNING: debug.mpsafenet forced to 0 as ng_h4 requires Giant
WARNING: MPSAFE network stack disabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Duo CPU     T7500  @ 2.20GHz (2194.51-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6fa  Stepping = 10
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,<b9>,CX16,<b14>,<b15>>
  AMD Features=0x20100000<NX,LM>
  AMD Features2=0x1<LAHF>
  Cores per package: 2
real memory  = 2147155968 (2047 MB)
avail memory = 2087620608 (1990 MB)
ACPI APIC Table: <A_M_I_ OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
wlan: mac acl policy registered
kbd1 at kbdmux0
netsmb_dev: loaded
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <_ASUS_ Notebook> on motherboard
acpi_ec0: <Embedded Controller: GPE 0x1c, ECDT> port 0x62,0x66 on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 2000
acpi0: Power Button (fixed)
unknown: I/O range not supported
unknown: I/O range not supported
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
cpu1: <ACPI CPU> on acpi0
acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
nvidia0: <GeForce 8600M GT> port 0x9c00-0x9c7f mem 0xfc000000-0xfcffffff,0xc0000000-0xcfffffff,0xfa000000-0xfbffffff irq 16 at device 0.0 on pci1
nvidia0: [GIANT-LOCKED]
uhci0: <UHCI (generic) USB controller> port 0xe080-0xe09f irq 16 at device 26.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xe000-0xe01f irq 21 at device 26.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfebff400-0xfebff7ff irq 18 at device 26.7 on pci0
ehci0: [GIANT-LOCKED]
usb2: waiting for BIOS to give up control
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
ugen0: Chicony Electronics Co., Ltd. USB2.0 1.3M UVC WebCam, rev 2.00/3.46, addr 2
uhid0: ASUS LCM, rev 2.00/0.04, addr 3, iclass 3/0
pcm0: <Intel 82801H High Definition Audio Controller> mem 0xfebf8000-0xfebfbfff irq 22 at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
re0: <RealTek 8168/8111B PCIe Gigabit Ethernet> port 0xa800-0xa8ff mem 0xfdfff000-0xfdffffff irq 16 at device 0.0 on pci2
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S media interface> on miibus0
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re0: Ethernet address: 00:1b:fc:bd:bf:57
re0: [FAST]
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <network> at device 0.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci6: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci7: <ACPI PCI bus> on pcib6
atapci0: <JMicron JMB360 SATA300 controller> port 0xcc00-0xcc07,0xc880-0xc883,0xc800-0xc807,0xc480-0xc483,0xc400-0xc40f mem 0xfe9fe000-0xfe9fffff irq 16 at device 0.0 on pci7
atapci0: AHCI Version 01.00 controller with 1 ports detected
ata2: <ATA channel 0> on atapci0
uhci2: <UHCI (generic) USB controller> port 0xdc00-0xdc1f irq 23 at device 29.0 on pci0
uhci2: [GIANT-LOCKED]
usb3: <UHCI (generic) USB controller> on uhci2
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0xd880-0xd89f irq 19 at device 29.1 on pci0
uhci3: [GIANT-LOCKED]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0xd800-0xd81f irq 18 at device 29.2 on pci0
uhci4: [GIANT-LOCKED]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfebff000-0xfebff3ff irq 23 at device 29.7 on pci0
ehci1: [GIANT-LOCKED]
usb6: EHCI version 1.0
usb6: companion controllers, 2 ports each: usb3 usb4 usb5
usb6: <EHCI (generic) USB 2.0 controller> on ehci1
usb6: USB revision 2.0
uhub6: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub6: 6 ports with 6 removable, self powered
uhub7: vendor 0x2001 product 0xf103, class 9/0, rev 2.00/1.00, addr 2
uhub7: single transaction translator
uhub7: 7 ports with 0 removable, self powered
ugen1: vendor 0x9710 product 0x7780, rev 1.10/0.01, addr 3
ugen2: Keyspan, a division of InnoSys Inc. Keyspan USA-19H, rev 1.10/1.00, addr 4
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/22.00, addr 5, iclass 3/1
ums0: 8 buttons and Z dir.
uhub8: Dell Dell USB Keyboard Hub, class 9/0, rev 1.10/2.00, addr 6
uhub8: 3 ports with 2 removable, bus powered
ukbd0: Dell Dell USB Keyboard Hub, rev 1.10/2.00, addr 7, iclass 3/1
kbd2 at ukbd0
uhid1: Dell Dell USB Keyboard Hub, rev 1.10/2.00, addr 7, iclass 3/1
umass0: vendor 0x0402 USB 2.0 Storage Device, rev 2.00/0.80, addr 8
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci8: <ACPI PCI bus> on pcib7
fwohci0: <1394 Open Host Controller Interface> mem 0xfeaff800-0xfeafffff irq 16 at device 1.0 on pci8
fwohci0: [GIANT-LOCKED]
fwohci0: OHCI version 1.0 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:e0:18:00:03:96:83:c7
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:e0:18:96:83:c7
fwe0: Ethernet address: 02:e0:18:96:83:c7
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci8: <base peripheral> at device 1.1 (no driver attached)
pci8: <base peripheral> at device 1.2 (no driver attached)
pci8: <base peripheral> at device 1.3 (no driver attached)
pci8: <base peripheral> at device 1.4 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <GENERIC ATA controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel 0> on atapci1
ata1: <ATA channel 1> on atapci1
atapci2: <Intel ICH8M SATA300 controller> port 0xec00-0xec07,0xe880-0xe883,0xe800-0xe807,0xe480-0xe483,0xe400-0xe41f mem 0xfebff800-0xfebfffff irq 20 at device 31.2 on pci0
atapci2: AHCI Version 01.10 controller with 3 ports detected
ata3: <ATA channel 0> on atapci2
ata4: <ATA channel 1> on atapci2
ata5: <ATA channel 2> on atapci2
acpi_button0: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
orm0: <ISA Option ROM> at iomem 0xcd000-0xcefff on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ukbd1: Gyration Gyration RF Technology Receiver, rev 1.10/1.50, addr 2, iclass 3/1
kbd3 at ukbd1
ums1: Gyration Gyration RF Technology Receiver, rev 1.10/1.50, addr 2, iclass 3/1
ums1: 5 buttons and Z dir.
ubt0: vendor 0x0b05 product 0x1712, rev 2.00/19.15, addr 2
ubt0: vendor 0x0b05 product 0x1712, rev 2.00/19.15, addr 2
ubt0: Interface 0 endpoints: interrupt=0x81, bulk-in=0x82, bulk-out=0x2
ubt0: Interface 1 (alt.config 5) endpoints: isoc-in=0x83, isoc-out=0x3; wMaxPacketSize=49; nframes=6, buffer size=294
Timecounters tick every 1.000 msec
acd0: DVDR <HL-DT-ST DVDRAM GSA-T20L/NR02> at ata0-master UDMA33
ad6: 152627MB <Hitachi HTS541616J9SA00 SB4OC70P> at ata3-master SATA150
pcm0: <HDA Codec: Realtek ALC660>
pcm0: <HDA Driver Revision: 20070710_0047>
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x01
SMP: AP CPU #1 Launched!
cd0 at ata0 bus 0 target 0 lun 0
cd0: <HL-DT-ST DVDRAM GSA-T20L NR02> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <USB2.0 SM/XD \\000\\000\\000?> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da1 at umass-sim0 bus 0 target 0 lun 1
da1: <USB2.0 CF/MD \\000\\000\\000?> Removable Direct Access SCSI-0 device
da1: 40.000MB/s transfers
da1: 3908MB (8005536 512 byte sectors: 255H 63S/T 498C)
da2 at umass-sim0 bus 0 target 0 lun 2
da2: <USB2.0 SD/MMC \\000\\000\\000?> Removable Direct Access SCSI-0 device
da2: 40.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
da3 at umass-sim0 bus 0 target 0 lun 3
da3: <USB2.0 MS/MSPRO \\000\\000\\000?> Removable Direct Access SCSI-0 device
da3: 40.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad6s2a
re0: link state changed to UP

>How-To-Repeat:
Insert 7.0 Beta 2 CD attempt to do a standard install.
>Fix:


>Release-Note:
>Audit-Trail:
>Unformatted: