kern/103715: [mpt] Broadcom BCM5708SKFB not recognised by the driver & new lsi SAS mpt driver seems not stable on DELL PE1955 (Blade)

[Patrick Oonk]

The following reply was made to PR kern/103715; it has been noted by GNATS.

From: Patrick Oonk <patrick at pine.nl>
To: bug-followup at FreeBSD.org, sebastien.lelong at ratp.fr
Cc:  
Subject: Re: kern/103715: [mpt] Broadcom BCM5708SKFB not recognised by the driver &amp; new lsi SAS mpt driver seems not stable on DELL PE1955 (Blade)
Date: Thu, 15 Mar 2007 12:54:48 +0100

 I see the same problem, but a but weirder. I have 2 network modules  
 in the 1955.
 Only one seems to be recognized.
 em0 is on pass-through module 3 of the blade.
 em1 shows up but cannot be used, I suspect it to be located on the  
 fourth pass-through
 module of the chassis, but we have only 3 of those so I cannot test it.