6.2-RELEASE bge driver vs dell sc440

[Szabolcs Géczi]

Hi,

I have dell sc440 server with onboard Broadcom gigabit nic.

pciconf -lv output:

none1 at pci5:0:0: class=0x020000 card=0x01df1028 chip=0x167a14e4 rev=0x02
hdr=0x00
    vendor   = 'Broadcom Corporation'
    class    = network
    subclass = ethernet

dmesg output:

FreeBSD 6.2-RELEASE-p2 #3: Fri Mar  9 18:08:58 CET 2007
    root at xxx:/usr/obj/usr/src/sys/SMP
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) D CPU 3.00GHz (2992.59-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf65  Stepping = 5

Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe49d<SSE3,RSVD2,MON,DS_CPL,EST,CNTX-ID,CX16,<b14>,<b15>>
  AMD Features=0x20100000<NX,LM>
  AMD Features2=0x1<LAHF>
  Cores per package: 2
real memory  = 1072152576 (1022 MB)
avail memory = 1040019456 (991 MB)
ACPI APIC Table: <DELL   B8K    >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 8
ioapic0 <Version 2.0> irqs 0-23 on motherboard
lapic0: Forcing LINT1 to edge trigger
kbd1 at kbdmux0
acpi0: <DELL B8K    > on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <PCI-PCI bridge> at device 0.0 on pci1
pci2: <PCI bus> on pcib2
mpt0: <LSILogic SAS/SATA Adapter> port 0xdc00-0xdcff mem
0xefdec000-0xefdeffff,0xefdf0000-0xefdfffff irq 16 at device 8.0 on pci2
mpt0: [GIANT-LOCKED]
mpt0: MPI Version=1.5.12.0
mpt0: mpt_cam_event: 0x16
mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required).
mpt0: mpt_cam_event: 0x12
mpt0: Unhandled Event Notify Frame. Event 0x12 (ACK not required).
mpt0: mpt_cam_event: 0x12
mpt0: Unhandled Event Notify Frame. Event 0x12 (ACK not required).
mpt0: mpt_cam_event: 0x16
mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required).
mpt0: mpt_cam_event: 0xb
mpt0: Unhandled Event Notify Frame. Event 0xb (ACK not required).
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pci5: <ACPI PCI bus> on pcib5
pci5: <network, ethernet> at device 0.0 (no driver attached)
...

and when i tried to kldload the if_bge i got this:

module_register: module bge/miibus already exists!
Module bge/miibus failed to register: 17
module_register: module pci/bge already exists!
Module pci/bge failed to register: 17

and I have still no bge interface :(.

Is there any chance got a driver for that nic?

thx,

sz