kern/79143: [ipmi] Broadcom NIC driver do not work for IPMI

Wed Jul 18 21:30:16 UTC 2007

The following reply was made to PR kern/79143; it has been noted by GNATS.

From: Laurent Frigault <lfrigault at agneau.org>
To: bug-followup at FreeBSD.org
Cc:  
Subject: Re: kern/79143: [ipmi] Broadcom NIC driver do not work for IPMI
Date: Wed, 18 Jul 2007 23:04:15 +0200

 --Nq2Wo0NMKNjxTN9z
 Content-Type: text/plain; charset=iso-8859-15
 Content-Disposition: inline

 I just reproduce the same problem under 6.2-RELEASE-p6 .

 The server is a DELL PowerEdge 860 . Please find a dmesg output .

 There is an other bug with this driver (bge0: <Broadcom BCM5750 B1, ASIC
 rev. 0x4101>)
 After the boot, the interface is UP without any error but not working.
 It needs an "ifconfig bge0 down;ifconfig bge0 up" to start working.

 It looks like the card was not fully initialized before binding the IP
 ont it.

 Those 2 problems exist on 2 servers (same hardware).

 Maybe are the two bugs related.

 Regards,
 -- 
 Laurent Frigault | <url:http://www.agneau.org/>
 UNIX _IS_ user friendly. It's just selective about who its friends are.

 --Nq2Wo0NMKNjxTN9z
 Content-Type: text/plain; charset=iso-8859-15
 Content-Disposition: attachment; filename=dmesg

 Copyright (c) 1992-2007 The FreeBSD Project.
 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
 	The Regents of the University of California. All rights reserved.
 FreeBSD is a registered trademark of The FreeBSD Foundation.
 FreeBSD 6.2-RELEASE-p6 #0: Wed Jul 18 11:52:56 CEST 2007
     root at XXXXX:/usr/src/sys/i386/compile/SMP
 Timecounter "i8254" frequency 1193182 Hz quality 0
 CPU: Intel(R) Pentium(R) D CPU 3.00GHz (3000.12-MHz 686-class CPU)
   Origin = "GenuineIntel"  Id = 0xf65  Stepping = 5
   Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
   Features2=0xe49d<SSE3,RSVD2,MON,DS_CPL,EST,CNTX-ID,CX16,<b14>,<b15>>
   AMD Features=0x20100000<NX,LM>
   AMD Features2=0x1<LAHF>
   Cores per package: 2
 real memory  = 2147221504 (2047 MB)
 avail memory = 2096107520 (1999 MB)
 ACPI APIC Table: <DELL   PE_SC3  >
 FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
  cpu0 (BSP): APIC ID:  0
  cpu1 (AP): APIC ID:  1
 ioapic0: Changing APIC ID to 2
 ioapic0 <Version 2.0> irqs 0-23 on motherboard
 kbd1 at kbdmux0
 ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
 acpi0: <DELL PE_SC3> on motherboard
 acpi0: Power Button (fixed)
 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
 cpu0: <ACPI CPU> on acpi0
 cpu1: <ACPI CPU> on acpi0
 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
 pci0: <ACPI PCI bus> on pcib0
 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
 pci1: <ACPI PCI bus> on pcib1
 pcib2: <PCI-PCI bridge> at device 0.0 on pci1
 pci2: <PCI bus> on pcib2
 mpt0: <LSILogic SAS/SATA Adapter> port 0xec00-0xecff mem 0xfe9fc000-0xfe9fffff,0xfe9e0000-0xfe9effff irq 16 at device 8.0 on pci2
 mpt0: [GIANT-LOCKED]
 mpt0: MPI Version=1.5.13.0
 mpt0: mpt_cam_event: 0x16
 mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required).
 mpt0: mpt_cam_event: 0x12
 mpt0: Unhandled Event Notify Frame. Event 0x12 (ACK not required).
 mpt0: mpt_cam_event: 0x12
 mpt0: Unhandled Event Notify Frame. Event 0x12 (ACK not required).
 mpt0: mpt_cam_event: 0x16
 mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required).
 mpt0: mpt_cam_event: 0xb
 mpt0: Unhandled Event Notify Frame. Event 0xb (ACK not required).
 pci1: <base peripheral, interrupt controller> at device 0.1 (no driver attached)
 pcib3: <ACPI PCI-PCI bridge> at device 28.0 on pci0
 pci3: <ACPI PCI bus> on pcib3
 pcib4: <ACPI PCI-PCI bridge> at device 28.4 on pci0
 pci4: <ACPI PCI bus> on pcib4
 bge0: <Broadcom BCM5750 B1, ASIC rev. 0x4101> mem 0xfe5f0000-0xfe5fffff irq 16 at device 0.0 on pci4
 miibus0: <MII bus> on bge0
 brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus0
 brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
 bge0: Ethernet address: 00:18:8b:f9:af:59
 pcib5: <ACPI PCI-PCI bridge> at device 28.5 on pci0
 pci5: <ACPI PCI bus> on pcib5
 bge1: <Broadcom BCM5750 B1, ASIC rev. 0x4101> mem 0xfe3f0000-0xfe3fffff irq 17 at device 0.0 on pci5
 miibus1: <MII bus> on bge1
 brgphy1: <BCM5750 10/100/1000baseTX PHY> on miibus1
 brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
 bge1: Ethernet address: 00:18:8b:f9:af:5a
 uhci0: <UHCI (generic) USB controller> port 0xace0-0xacff irq 20 at device 29.0 on pci0
 uhci0: [GIANT-LOCKED]
 usb0: <UHCI (generic) USB controller> on uhci0
 usb0: USB revision 1.0
 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub0: 2 ports with 2 removable, self powered
 uhci1: <UHCI (generic) USB controller> port 0xacc0-0xacdf irq 21 at device 29.1 on pci0
 uhci1: [GIANT-LOCKED]
 usb1: <UHCI (generic) USB controller> on uhci1
 usb1: USB revision 1.0
 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub1: 2 ports with 2 removable, self powered
 uhci2: <UHCI (generic) USB controller> port 0xaca0-0xacbf irq 22 at device 29.2 on pci0
 uhci2: [GIANT-LOCKED]
 usb2: <UHCI (generic) USB controller> on uhci2
 usb2: USB revision 1.0
 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub2: 2 ports with 2 removable, self powered
 ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfeb00000-0xfeb003ff irq 20 at device 29.7 on pci0
 ehci0: [GIANT-LOCKED]
 usb3: EHCI version 1.0
 usb3: wrong number of companions (7 != 3)
 usb3: companion controllers, 2 ports each: usb0 usb1 usb2
 usb3: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
 usb3: USB revision 2.0
 uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
 uhub3: 6 ports with 6 removable, self powered
 uhub4: vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.0b, addr 2
 uhub4: multiple transaction translators
 uhub4: 4 ports with 4 removable, self powered
 ukbd0: Dell Dell USB Keyboard, rev 1.10/3.01, addr 3, iclass 3/1
 kbd2 at ukbd0
 pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
 pci6: <ACPI PCI bus> on pcib6
 pci6: <display, VGA> at device 5.0 (no driver attached)
 isab0: <PCI-ISA bridge> at device 31.0 on pci0
 isa0: <ISA bus> on isab0
 atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0
 ata0: <ATA channel 0> on atapci0
 ata1: <ATA channel 1> on atapci0
 pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
 fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
 fdc0: does not respond
 device_attach: fdc0 attach returned 6
 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
 sio0: type 16550A
 fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
 fdc0: does not respond
 device_attach: fdc0 attach returned 6
 pmtimer0 on isa0
 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xec000-0xeffff on isa0
 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
 atkbd0: <AT Keyboard> irq 1 on atkbdc0
 kbd0 at atkbd0
 atkbd0: [GIANT-LOCKED]
 ppc0: parallel port not found.
 sc0: <System console> at flags 0x100 on isa0
 sc0: VGA <16 virtual consoles, flags=0x300>
 sio1: configured irq 3 not in bitmap of probed irqs 0
 sio1: port may not be enabled
 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
 Timecounters tick every 1.000 msec
 acd0: CDROM <HL-DT-ST GCR-8240N/1.10> at ata0-master UDMA33
 da0 at mpt0 bus 0 target 0 lun 0
 da0: <Dell VIRTUAL DISK 1028> Fixed Direct Access SCSI-5 device 
 da0: 300.000MB/s transfers, Tagged Queueing Enabled
 da0: 151634MB (310546432 512 byte sectors: 255H 63S/T 19330C)
 SMP: AP CPU #1 Launched!
 Trying to mount root from ufs:/dev/da0s1a
 ukbd0: at uhub4 port 1 (addr 3) disconnected
 ukbd0: detached

 --Nq2Wo0NMKNjxTN9z--