bin/103791: scp works not in one of two directions

Helmut Schellong schellong at t-online.de
Fri Sep 29 04:40:23 PDT 2006


The following reply was made to PR bin/103791; it has been noted by GNATS.

From: Helmut Schellong <schellong at t-online.de>
To: bug-followup at FreeBSD.org
Cc:  
Subject: Re: bin/103791: scp works not in one of two directions
Date: Fri, 29 Sep 2006 13:31:19 +0200

  From 6.2 BETA1 - Failure:
 ===========================================================================
 Executing: program /usr/bin/ssh host 192.168.64.100, user root, command scp -v -r -p -f /u/wir
 OpenSSH_4.2p1 FreeBSD-20050903, OpenSSL 0.9.7e-p1 25 Oct 2004
 debug1: Reading configuration data /etc/ssh/ssh_config
 debug2: ssh_connect: needpriv 0
 debug1: Connecting to 192.168.64.100 [192.168.64.100] port 22.
 debug1: Connection established.
 debug1: permanently_set_uid: 0/0
 debug1: identity file /home/.ssh/identity type -1
 debug1: identity file /home/.ssh/id_rsa type -1
 debug1: identity file /home/.ssh/id_dsa type -1
 debug1: Remote protocol version 2.0, remote software version OpenSSH_4.2p1 FreeBSD-20050903
 debug1: match: OpenSSH_4.2p1 FreeBSD-20050903 pat OpenSSH*
 debug1: Enabling compatibility mode for protocol 2.0
 debug1: Local version string SSH-2.0-OpenSSH_4.2p1 FreeBSD-20050903
 debug2: fd 3 setting O_NONBLOCK
 debug1: SSH2_MSG_KEXINIT sent
 debug1: SSH2_MSG_KEXINIT received
 debug2: kex_parse_kexinit: 
 diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
 debug2: kex_parse_kexinit: ssh-dss,ssh-rsa
 debug2: kex_parse_kexinit: 
 aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc at lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
 debug2: kex_parse_kexinit: 
 aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc at lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
 debug2: kex_parse_kexinit: 
 hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160 at openssh.com,hmac-sha1-96,hmac-md5-96
 debug2: kex_parse_kexinit: 
 hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160 at openssh.com,hmac-sha1-96,hmac-md5-96
 debug2: kex_parse_kexinit: none,zlib at openssh.com,zlib
 debug2: kex_parse_kexinit: none,zlib at openssh.com,zlib
 debug2: kex_parse_kexinit:
 debug2: kex_parse_kexinit:
 debug2: kex_parse_kexinit: first_kex_follows 0
 debug2: kex_parse_kexinit: reserved 0
 debug2: kex_parse_kexinit: 
 diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
 debug2: kex_parse_kexinit: ssh-dss
 debug2: kex_parse_kexinit: 
 aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc at lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
 debug2: kex_parse_kexinit: 
 aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc at lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
 debug2: kex_parse_kexinit: 
 hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160 at openssh.com,hmac-sha1-96,hmac-md5-96
 debug2: kex_parse_kexinit: 
 hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160 at openssh.com,hmac-sha1-96,hmac-md5-96
 debug2: kex_parse_kexinit: none,zlib at openssh.com
 debug2: kex_parse_kexinit: none,zlib at openssh.com
 debug2: kex_parse_kexinit:
 debug2: kex_parse_kexinit:
 debug2: kex_parse_kexinit: first_kex_follows 0
 debug2: kex_parse_kexinit: reserved 0
 debug2: mac_init: found hmac-md5
 debug1: kex: server->client aes128-cbc hmac-md5 none
 debug2: mac_init: found hmac-md5
 debug1: kex: client->server aes128-cbc hmac-md5 none
 debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
 debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
 debug2: dh_gen_key: priv key bits set: 129/256
 debug2: bits set: 504/1024
 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
 debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
 debug1: Host '192.168.64.100' is known and matches the DSA host key.
 debug1: Found key in /home/.ssh/known_hosts:1
 debug2: bits set: 493/1024
 debug1: ssh_dss_verify: signature correct
 debug2: kex_derive_keys
 debug2: set_newkeys: mode 1
 debug1: SSH2_MSG_NEWKEYS sent
 debug1: expecting SSH2_MSG_NEWKEYS
 debug2: set_newkeys: mode 0
 debug1: SSH2_MSG_NEWKEYS received
 debug1: SSH2_MSG_SERVICE_REQUEST sent
 debug2: service_accept: ssh-userauth
 debug1: SSH2_MSG_SERVICE_ACCEPT received
 debug2: key: /home/.ssh/identity (0x0)
 debug2: key: /home/.ssh/id_rsa (0x0)
 debug2: key: /home/.ssh/id_dsa (0x0)
 debug1: Authentications that can continue: publickey,keyboard-interactive
 debug1: Next authentication method: publickey
 debug1: Trying private key: /home/.ssh/identity
 debug1: Trying private key: /home/.ssh/id_rsa
 debug1: Trying private key: /home/.ssh/id_dsa
 debug2: we did not send a packet, disable method
 debug1: Next authentication method: keyboard-interactive
 debug2: userauth_kbdint
 debug2: we sent a keyboard-interactive packet, wait for reply
 debug2: input_userauth_info_req
 debug2: input_userauth_info_req: num_prompts 1
 debug2: input_userauth_info_req
 debug2: input_userauth_info_req: num_prompts 0
 debug1: Authentication succeeded (keyboard-interactive).
 debug2: fd 4 setting O_NONBLOCK
 debug2: fd 5 setting O_NONBLOCK
 debug2: fd 6 setting O_NONBLOCK
 debug1: channel 0: new [client-session]
 debug2: channel 0: send open
 debug1: Entering interactive session.
 debug2: callback start
 debug2: client_session2_setup: id 0
 debug1: Sending command: scp -v -r -p -f /u/wir
 debug2: channel 0: request exec confirm 0
 debug2: callback done
 debug2: channel 0: open confirm rwindow 0 rmax 32768
 debug2: channel 0: rcvd adjust 131072
 Sink: kern.metadelay: 8 -> 8
 kern.metadelay: 8 -> 8
 debug2: channel 0: read<=0 rfd 4 len 0
 debug2: channel 0: read failed
 debug2: channel 0: close_read
 debug2: channel 0: input open -> drain
 debug2: channel 0: ibuf empty
 debug2: channel 0: send eof
 debug2: channel 0: input drain -> closed
 debug2: channel 0: write failed
 debug2: channel 0: close_write
 debug2: channel 0: output open -> closed
 debug1: client_input_channel_req: channel 0 rtype exit-status reply 0
 debug2: channel 0: rcvd eof
 debug2: channel 0: rcvd close
 debug2: channel 0: almost dead
 debug2: channel 0: gc: notify user
 debug2: channel 0: gc: user detached
 debug2: channel 0: send close
 debug2: channel 0: is dead
 debug2: channel 0: garbage collecting
 debug1: channel 0: free: client-session, nchannels 1
 debug1: fd 0 clearing O_NONBLOCK
 debug1: fd 1 clearing O_NONBLOCK
 debug1: fd 2 clearing O_NONBLOCK
 debug1: Transferred: stdin 0, stdout 0, stderr 0 bytes in 0.3 seconds
 debug1: Bytes per second: stdin 0.0, stdout 0.0, stderr 0.0
 debug1: Exit status 1
 ===========================================================================
 
 
 
 from FBSD 6.1 - success:
 ===========================================================================
 Executing: program /usr/bin/ssh host 192.168.64.102, user root, command scp -v -p -f /tmp/z
 OpenSSH_4.2p1 FreeBSD-20050903, OpenSSL 0.9.7e-p1 25 Oct 2004
 debug1: Reading configuration data /etc/ssh/ssh_config
 debug1: Connecting to 192.168.64.102 [192.168.64.102] port 22.
 debug1: Connection established.
 debug1: permanently_set_uid: 0/0
 debug1: identity file /home/.ssh/identity type -1
 debug1: identity file /home/.ssh/id_rsa type -1
 debug1: identity file /home/.ssh/id_dsa type 2
 debug1: Remote protocol version 2.0, remote software version OpenSSH_4.2p1 FreeBSD-20050903
 debug1: match: OpenSSH_4.2p1 FreeBSD-20050903 pat OpenSSH*
 debug1: Enabling compatibility mode for protocol 2.0
 debug1: Local version string SSH-2.0-OpenSSH_4.2p1 FreeBSD-20050903
 debug1: SSH2_MSG_KEXINIT sent
 debug1: SSH2_MSG_KEXINIT received
 debug1: kex: server->client aes128-cbc hmac-md5 none
 debug1: kex: client->server aes128-cbc hmac-md5 none
 debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
 debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
 debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
 debug1: Host '192.168.64.102' is known and matches the DSA host key.
 debug1: Found key in /home/.ssh/known_hosts:2
 debug1: ssh_dss_verify: signature correct
 debug1: SSH2_MSG_NEWKEYS sent
 debug1: expecting SSH2_MSG_NEWKEYS
 debug1: SSH2_MSG_NEWKEYS received
 debug1: SSH2_MSG_SERVICE_REQUEST sent
 debug1: SSH2_MSG_SERVICE_ACCEPT received
 debug1: Authentications that can continue: publickey,keyboard-interactive
 debug1: Next authentication method: publickey
 debug1: Trying private key: /home/.ssh/identity
 debug1: Trying private key: /home/.ssh/id_rsa
 debug1: Offering public key: /home/.ssh/id_dsa
 debug1: Authentications that can continue: publickey,keyboard-interactive
 debug1: Next authentication method: keyboard-interactive
 Password:
 debug1: Authentication succeeded (keyboard-interactive).
 debug1: channel 0: new [client-session]
 debug1: Entering interactive session.
 debug1: Sending command: scp -v -p -f /tmp/z
 Sink: T1159529051 0 1159529084 0
 Sink: C0644 6177 z
 z                                                         0%    0     0.0KB/s   --:-- ETASending 
 file modes: C0644 6177 z
 z                                                       100% 6177     6.0KB/s   00:00
 debug1: client_input_channel_req: channel 0 rtype exit-status reply 0
 debug1: channel 0: free: client-session, nchannels 1
 debug1: fd 0 clearing O_NONBLOCK
 debug1: fd 1 clearing O_NONBLOCK
 debug1: Transferred: stdin 0, stdout 0, stderr 0 bytes in 0.0 seconds
 debug1: Bytes per second: stdin 0.0, stdout 0.0, stderr 0.0
 debug1: Exit status 0
 ===========================================================================
 
 
 -- 
 Mit freundlichen Grüßen
 Helmut Schellong   var at schellong.biz
 www.schellong.de   www.schellong.com   www.schellong.biz
 http://www.schellong.de/c.htm


More information about the freebsd-bugs mailing list