kern/104652: add non-completed suspend/resume support for the bfe
driver
redchrom at gmail.com
redchrom at gmail.com
Sat Oct 21 08:20:19 PDT 2006
>Number: 104652
>Category: kern
>Synopsis: add non-completed suspend/resume support for the bfe driver
>Confidential: no
>Severity: non-critical
>Priority: medium
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Sat Oct 21 15:20:13 GMT 2006
>Closed-Date:
>Last-Modified:
>Originator: Stepan Zastupov (RedChrom)
>Release: FreeBSD 7.0-CURRENT i386
>Organization:
ISPSystem
>Environment:
System: FreeBSD stepan.ispsystem.net 7.0-CURRENT FreeBSD 7.0-CURRENT #5: Fri Oct 20 11:51:51 IRKST 2006 root at stepan.ispsystem.net:/usr/obj/usr/src/sys/LILITH i386
>Description:
bfe driver dosen't support suspend/resume device methods and system with loaded bfe driver don't want to resume.
I've added some basic functions to the driver, but it dosen't help. Linux driver just detach a device on suspend and attach on resume - on FreeBSD only detaching success. Normal FreeBSD routines like stoping and reseting on suspend/resume dosen't help. As I see in Linux network cards usually dosen't dettach/attach on syspend/resume but with this driver does, so maybe we should play with it?
Here is my dmesg:
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-CURRENT #5: Fri Oct 20 11:51:51 IRKST 2006
root at stepan.ispsystem.net:/usr/obj/usr/src/sys/LILITH
ACPI APIC Table: <HP 099C >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Celeron(R) M processor 1.50GHz (1496.26-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6d8 Stepping = 8
Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
AMD Features=0x100000<NX>
real memory = 528285696 (503 MB)
avail memory = 507305984 (483 MB)
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <HP 099C> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x10> port 0x62,0x66 on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x7000-0x7007 mem 0xd0400000-0xd047ffff,0xc0000000-0xcfffffff,0xd0480000-0xd04bffff irq 16 at device 2.0 on pci0
agp0: <Intel 82915GM (915GM GMCH) SVGA controller> on vgapci0
agp0: detected 7932k stolen memory
agp0: aperture size is 256M
vgapci1: <VGA-compatible display> mem 0xd0500000-0xd057ffff at device 2.1 on pci0
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0x2000-0x201f irq 23 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0x2020-0x203f irq 17 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0x2040-0x205f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0x2060-0x207f irq 19 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0xd0580000-0xd05803ff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib1
cbb0: <TI6411 PCI-CardBus Bridge> mem 0xd0000000-0xd0000fff irq 18 at device 6.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pci2: <serial bus, FireWire> at device 6.2 (no driver attached)
pci2: <network, ethernet> at device 14.0 (no driver attached)
pcm0: <Intel ICH6 (82801FB)> port 0x2100-0x21ff,0x2200-0x223f mem 0xd0581000-0xd05811ff,0xd0582000-0xd05820ff irq 21 at device 30.2 on pci0
pcm0: <Analog Devices AD1981B AC97 Codec>
pci0: <simple comms, generic modem> at device 30.3 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2580-0x258f irq 16 at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
acpi_tz2: <Thermal Zone> on acpi0
acpi_tz3: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1496260038 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 38154MB <FUJITSU MHV2040AH 00830096> at ata0-master UDMA100
acd0: DVDR <MATSHITAUJ-840D/1.02> at ata0-slave PIO4
Trying to mount root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
cd0 at ata0 bus 0 target 1 lun 0
cd0: <MATSHITA UJ-840D 1.02> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
WARNING: attempt to net_add_domain(bluetooth) after domainfinalize()
drm0: <Intel i915GM> on vgapci0
info: [drm] AGP at 0xd0400000 0MB
info: [drm] Initialized i915 1.5.0 20060119
bfe0: <Broadcom BCM4401-B0 Fast Ethernet> mem 0xd000e000-0xd000ffff irq 16 at device 14.0 on pci2
miibus0: <MII bus> on bfe0
bmtphy0: <BCM4401 10/100baseTX PHY> on miibus0
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bfe0: Ethernet address: 00:15:60:c2:06:2f
bfe0: link state changed to DOWN
bfe0: link state changed to UP
>How-To-Repeat:
Load bfe driver if not presented in kernel and try to suspend (acpiconf -s 3) system.
>Fix:
--- if_bfe.c.orig Sat Oct 21 23:04:16 2006
+++ if_bfe.c Sat Oct 21 23:07:23 2006
@@ -97,6 +97,8 @@
static void bfe_stop (struct bfe_softc *);
static void bfe_watchdog (struct ifnet *);
static void bfe_shutdown (device_t);
+static int bfe_suspend (device_t);
+static int bfe_resume (device_t);
static void bfe_tick (void *);
static void bfe_txeof (struct bfe_softc *);
static void bfe_rxeof (struct bfe_softc *);
@@ -136,6 +138,8 @@
DEVMETHOD(device_attach, bfe_attach),
DEVMETHOD(device_detach, bfe_detach),
DEVMETHOD(device_shutdown, bfe_shutdown),
+ DEVMETHOD(device_suspend, bfe_suspend),
+ DEVMETHOD(device_resume, bfe_resume),
/* bus interface */
DEVMETHOD(bus_print_child, bus_generic_print_child),
@@ -441,7 +445,7 @@
KASSERT(mtx_initialized(&sc->bfe_mtx), ("bfe mutex not initialized"));
BFE_LOCK(sc);
-
+
ifp = sc->bfe_ifp;
if (device_is_attached(dev)) {
@@ -477,6 +481,22 @@
BFE_UNLOCK(sc);
return;
+}
+
+static int
+bfe_suspend(device_t dev)
+{
+ bfe_detach(dev);
+
+ return (0);
+}
+
+static int
+bfe_resume(device_t dev)
+{
+ bfe_attach(dev);
+
+ return (0);
}
static int
>Release-Note:
>Audit-Trail:
>Unformatted:
More information about the freebsd-bugs
mailing list